9 research outputs found
Efficient HTS DC- Cable for Power Distribution in Hybrid-Electric Aircraft
With respect to a substantial reduction of greenhouse gas emission, noise reduction and combustible consumption in aircraft an increasing interest in hybrid-electric propulsion systems has emerged in the last years. In the frame of a German research project we actually develop a HTS superconducting busbar system for DC currents able to join the different components as generator, motors and battery systems on the plane.
Main features of this busbar system are large currents at moderate voltages and in particular low ohmic contacts, including T-type, Y-type and cross connections between system segments, this with a minimization of outer dimensions and weight. The two-pole cable consists of two stacks of REBCO tapes. Compensation of Lorentz forces between the two poles, compensation of thermal length changes and sufficient electric insulation are the major challenges. We will present details of the cable design and first test results on a lab-scale cable demonstrator
Assessment of MHD-relevant parameters in high enthalpy air plasma for flow manipulation experiments
Bending radius limits of different coated REBCO conductor tapes - an experimental investigation with regard to HTS undulators
Compact FELs require short-period, high-field undulators in combination with compact accelerator structures to produce coherent light up to X-rays. Likewise, for the production of low emittance positron beams for future lepton colliders, like CLIC or FCC-ee, high-field damping wigglers are required. Applying high-temperature superconductors (HTS) in form of coated REBCO tape conductors allows reaching higher magnetic fields and larger operating margins as compared to low-temperature superconductors (LTS) like Nb-Ti or Nb~3~Sn.
However, short undulator periods like 13 mm may require bending radii of the conductor smaller than 5 mm which induce significant bending strain on the superconducting layer and may harm its conducting properties. In this contribution, we present our designed bending rig and experimental results for coated REBCO tape conductors from various manufacturers and with different properties. Investigated bending radii reach from 20 mm down to 1 mm and optionally include half of a helical twist. To represent magnet winding procedures, the samples were bent at room temperature and then cooled down to T = 77 K in the bent state to test for potential degradation of the superconducting properties
A Magnetohydrodynamic enhanced entry system for space transportation: MEESST
This paper outlines the initial development of a novel magnetohydrodynamic (MHD) plasma control system which aims at mitigating shock-induced heating and the radio-frequency communication blackout typically encountered during (re-)entry into planetary atmospheres. An international consortium comprising universities, SMEs, research institutions, and industry has been formed in order to develop this technology within the MEESST project. The latter is funded by the Future and Emerging Technologies (FET) program of the European Commission’s Horizon 2020 scheme (grant no. 899298). Atmospheric entry imposes one of the harshest environments which a spacecraft can experience. The combination of hypersonic velocities and the rapid compression of atmospheric particles by the spacecraft leads to high-enthalpy, partially ionised gases forming around the vehicle. This inhibits radio communications and induces high thermal loads on the spacecraft surface. For the former problem, spacecraft can sometimes rely on satellite constellations for communicating through the plasma wake and therefore preventing the blackout. On the other hand, expensive, heavy, and non-reusable thermal protection systems (TPS) are needed to dissipate the severe thermal loads. Such TPS can represent up to 30% of an entry vehicles weight, and especially for manned missions they can reduce the cost- efficiency by sacrificing payload mass. Such systems are also prone to failure, putting the lives of astronauts at risk. The use of electromagnetic fields to exploit MHD principles has long been considered as an attractive solution for tackling the problems described above. By pushing the boundary layer of the ionized gas layer away from the spacecraft, the thermal loads can be reduced, while also opening a magnetic window for radio communications and mitigating the blackout phenomenon. The application of this MHD-enabled system has previously not been demonstrated in realistic conditions due to the required large magnetic fields (on the order of Tesla or more), which for conventional technologies would demand exceptionally heavy and power-hungry electromagnets. High-temperature superconductors (HTS) have reached a level of industrial maturity sufficient for them to act as a key enabling technology for this application. Thanks to superior current densities, HTS coils can offer the necessary low weight and compactness required for space applications, with the ability to generate the strong magnetic fields needed for entry purposes. This paper provides an overview of the MEESST project, including its goals, methodology and some preliminary design considerations
A Magnetohydrodynamic enhanced entry system for space transportation: MEESST
This paper outlines the initial development of a novel magnetohydrodynamic (MHD) plasma control system which aims at mitigating shock-induced heating and the radio-frequency communication blackout typically encountered during (re-)entry into planetary atmospheres. An international consortium comprising universities, SMEs, research institutions, and industry has been formed in order to develop this technology within the MEESST project. The latter is funded by the Future and Emerging Technologies (FET) program of the European Commission’s Horizon 2020 scheme (grant no. 899298). Atmospheric entry imposes one of the harshest environments which a spacecraft can experience. The combination of hypersonic velocities and the rapid compression of atmospheric particles by the spacecraft leads to high-enthalpy, partially ionised gases forming around the vehicle. This inhibits radio communications and induces high thermal loads on the spacecraft surface. For the former problem, spacecraft can sometimes rely on satellite constellations for communicating through the plasma wake and therefore preventing the blackout. On the other hand, expensive, heavy, and non-reusable thermal protection systems (TPS) are needed to dissipate the severe thermal loads. Such TPS can represent up to 30% of an entry vehicles weight, and especially for manned missions they can reduce the cost- efficiency by sacrificing payload mass. Such systems are also prone to failure, putting the lives of astronauts at risk. The use of electromagnetic fields to exploit MHD principles has long been considered as an attractive solution for tackling the problems described above. By pushing the boundary layer of the ionized gas layer away from the spacecraft, the thermal loads can be reduced, while also opening a magnetic window for radio communications and mitigating the blackout phenomenon. The application of this MHD-enabled system has previously not been demonstrated in realistic conditions due to the required large magnetic fields (on the order of Tesla or more), which for conventional technologies would demand exceptionally heavy and power-hungry electromagnets. High-temperature superconductors (HTS) have reached a level of industrial maturity sufficient for them to act as a key enabling technology for this application. Thanks to superior current densities, HTS coils can offer the necessary low weight and compactness required for space applications, with the ability to generate the strong magnetic fields needed for entry purposes. This paper provides an overview of the MEESST project, including its goals, methodology and some preliminary design considerations