32 research outputs found
Recommended from our members
Effect of Starch Type and Pre-Treatment on the Properties of Gelatin–Starch Foams Produced by Mechanical Foaming
Incorporating biopolymers in packaging foams can contribute to a more circular packaging system, utilizing renewable and compostable materials. Gelatin, with its favorable physicochemical properties, allows for producing gelatin foams via mechanical foaming, a well-established and low-investment process. To improve foam properties, starch can be added to the gelatin formulation. However, the variability in the properties of starch powders can impact the polymer blend and, consequently, the properties of the dry foam. This study aimed to investigate the impact of different starch powders from different botanical origins (tapioca and corn) and treatments (native or pregelatinized) on the properties of gelatin–starch foams produced by mechanical foaming. The study successfully produced foams with densities of approximately 45–50 kg/m3 and compression properties comparable to EPS (expanded polystyrene) foams. The starch type and pre-treatment significantly influenced the properties of the foam. Pregelatinized starches exhibited slightly higher densities due to lower foamability caused by higher viscosity. Using starch exhibiting total loss of birefringence led to denser foams with greater compression properties than those with starch with a certain degree of crystallinity remaining. Therefore, selecting the appropriate starch type is crucial when developing starch-based materials to ensure optimal material and processing properties align with application requirements
Dynamic Analysis of Tip Leakage Phenomena in Axial Flow Pumps Using a Square-Cavity Jet Model
In the field of pump impeller studies, tip leakage flow (TLF) and the resultant tip leakage vortex (TLV) significantly influence hydraulic efficiency, cavitation, and noise generation. This paper builds a novel square-cavity jet model combined with Large Eddy Simulation (LES) technology to obtain precise the dynamic properties of the TLV, significantly simplifying the computational resources required for numerical simulations. The novel square-cavity jet model simplifies a single blade channel to a square-cavity, and then adds a longitudinal slit on the top wall of the square-cavity. The analysis of both instantaneous and time-averaged flow fields indicates that the interaction between the main flow and the jet is the primary source of TLV generation. This study successfully captures the formation process of the TLV and accurately reveals its turbulent coherent structures. The evolution of the TLV is divided into three main parts: the first part is the jet slot, predominantly characterized by negative vorticity flow. The second part is the TLV formation, which is mainly composed of significant negative streamwise vortices. The third part is the development of the TLV, where positive and negative vorticities begin to interact, resulting in a more complex overall structure. The entire evolution of the TLV phenomenon starts with a concentrated negative vortex, which, after breakdown, develops at a certain angle to the slot and continuously advances towards the sidewall, ultimately resulting in the formation of a large-scale intermingled group of small-scale positive and negative vortices. This research not only provides a new physical model for investigating the tip leakage phenomenon in axial flow pumps but also offers a powerful tool and methodology for future studies in similar complex flow domains
Excessive nerve growth factor impairs bidirectional communication between the oocyte and cumulus cells resulting in reduced oocyte competence
Abstract Background Excessive nerve growth factor (NGF) is commonly found in the follicular fluid of patients with polycystic ovary syndrome (PCOS). Furthermore, oocytes from PCOS patients exhibit lower developmental competence. The purpose of this study was to explore the association between excessive NGF and low oocyte competence in vitro. Methods Excessive NGF was added to mouse cumulus oocyte complexes (COCs) cultured in vitro to investigate meiotic maturation of the oocyte. After culture, mRNA expression levels of Pfkp and Ldha genes in cumulus cells (CCs) and Gdf9, Bmp15 and Fgf8 genes in oocytes, were determined by real-time quantitative polymerase chain reaction (qPCR). We also investigated the mRNA content of Pfkp and Ldha in CCs from PCOS and non-PCOS patients. Results Excessive NGF significantly inhibited oocyte meiotic maturation. The inhibitory effect was mediated by the NGF high-affinity receptor, NTRK1. mRNA content of Pfkp and Ldha genes in CCs was significantly reduced by excessive NGF stimulation. Moreover, the expression levels of Gdf9, Bmp15 and Fgf8 were also decreased in oocytes, and was induced by excessive NGF-stimulated CCs. In addition, lower expression levels of Pfkp and Ldha in CCs were identified in Chinese PCOS patients with excessive NGF (PCOS, 22 ± 2.63 ng/ml, n = 13; non-PCOS, 7.18 ± 2.42 ng/ml, n = 9; p < 0.01) in the follicular fluid, suggesting a potential association between excessive NGF and decreased glycolysis in the CCs of women with PCOS. Conclusions Excessive NGF impairs bidirectional communication between oocyte and cumulus cells, which might be related to low oocyte competence
Role of Sodium Dodecyl Sulfate in Tailoring the Rheological Properties of High-Strength Gelatin Hydrogels
Gelatin hydrogels are widely used materials that may require surfactants to adjust their solution’s surface tension for cell attachment, surface adsorption enhancement, or foaming. However, gelatin is a highly surface-active polymer, and its concentrated solutions usually do not require surfactants to achieve low surface tension. However, anionic surfactants, such as sodium dodecyl sulfate (SDS), interact strongly with gelatin to form complexes that impact its hydrogels’ rheological properties, influencing processability and functionality. Nevertheless, there is a lack of systematic research on the impact of these complexes on high gelatin content (i.e., high strength) hydrogels’ rheological properties. In this work, the SDS/gelatin ratio-dependent viscoelastic properties (e.g., gel strength, gelation kinetics, and melting/gelling temperature) of high-strength gelatin hydrogels were investigated using rheology and correlated to surface tension, viscometry, FTIR, and UV-Vis spectrophotometry. SDS–gelatin ratio was proved to be an important factor in tailoring the rheological properties of gelatin hydrogels. The gel strength, gelation kinetics, and melting/gelling temperature of the gelatin hydrogels linearly increased with SDS incorporation up to a maximum value, from which they started to decline. The findings of this work have wide applicability in tailoring the properties of gelatin–SDS solutions and hydrogels during their processing
Construction of a microsatellite-based genetic linkage map for half-smooth tongue sole Cynoglossus semilaevis
The half-smooth tongue sole Cynoglossus semilaevis is an important cultured marine fish and a promising model fish for the study of sex determination. Sex-specific genetic linkage maps of half-smooth tongue sole were developed with 567 markers (565 microsatellite markers and two SCAR markers). The parents and F1 progeny (92 individuals) were used as segregating populations. The female map was composed of 480 markers in 21 linkage groups, covering a total of 1388.1 cM, with an average interval 3.06 cM between markers. The male map consisted of 417 markers in 21 linkage groups, spanning 1480.9 cM, with an average interval of 3.75 cM. The female and male maps had 474 and 416 unique positions, respectively. The genome length of half-smooth tongue sole was estimated to be 1522.9 cM for females and 1649.1cM for males. Based on estimations of map length, the female and male maps covered 91.1% and 89.8% of the genome, respectively. Furthermore, two female-specific SCAR markers, f-382 and f-783, were mapped on LG15f (linkage group 15 in female maps). The present study presents a mid-density genetic linkage map for half-smooth tongue sole. These improved genetic linkage maps may facilitate systematic genome searches to identify quantitative trait loci (QTL), such as disease resistance, growth and sex-related traits, and are very useful for marker-assisted selection breeding programs for economically important traits in half-smooth tongue sole [Current Zoology 59 (1): 99–108, 2013]
Correction: Construction of a High-Density Microsatellite Genetic Linkage Map and Mapping of Sexual and Growth-Related Traits in Half-Smooth Tongue Sole (Cynoglossus semilaevis).
Correction: Construction of a High-Density Microsatellite Genetic Linkage Map and Mapping of Sexual and Growth-Related Traits in Half-Smooth Tongue Sole (Cynoglossus semilaevis)
Hydraulic-driven adaptable morphing active-cooling elastomer with bioinspired bicontinuous phases
Abstract The active-cooling elastomer concept, originating from vascular thermoregulation for soft biological tissue, is expected to develop an effective heat dissipation method for human skin, flexible electronics, and soft robots due to the desired interface mechanical compliance. However, its low thermal conduction and poor adaptation limit its cooling effects. Inspired by the bone structure, this work reports a simple yet versatile method of fabricating arbitrary-geometry liquid metal skeleton-based elastomer with bicontinuous Gyroid-shaped phases, exhibiting high thermal conductivity (up to 27.1 W/mK) and stretchability (strain limit >600%). Enlightened by the vasodilation principle for blood flow regulation, we also establish a hydraulic-driven conformal morphing strategy for better thermoregulation by modulating the hydraulic pressure of channels to adapt the complicated shape with large surface roughness (even a concave body). The liquid metal active-cooling elastomer, integrated with the flexible thermoelectric device, is demonstrated with various applications in the soft gripper, thermal-energy harvesting, and head thermoregulation