7 research outputs found
Kinetics of the photocatalysed oxidation of NO in the ISO 22197 reactor
The photocatalytic reactor described in the NOx removal ISO 22197-1:2007 is used to study the kinetics of the process, using a film of P25 TiO2 which has either been conventionally pre-irradiated in a stream of air, or unconventionally in a stream of NO (1 ppmv). In the former case it is shown that the system does not achieve steady state exit levels of NO, probably due to the gradual accumulation of HNO3 on the surface of the photocatalyst. The NO-preconditioned TiO2 film demonstrated excellent steady-state levels when monitored as a function of NO concentration, [NO] and UV irradiance, ρ. However, in this case the photocatalytic reaction under study is NOT NOx removal, but the conversion of NO to NO2. It is shown that the kinetics of this steady state process fit very well to a kinetic expression based on a disrupted adsorption reaction mechanism, which has also been used by others to fit their observed (non-steady state) kinetics for NOx removal on conventionally-(air) preconditioned films of P25. The appropriateness of this model for either system is questioned, since in both systems the kinetics appear to have a significant mass transport element. These findings suggest that mass transport and non-steady-state kinetics are likely to be significant features for most active photocatalytic samples, where the %NO conversion is >7%, and so limits the usefulness of the NOx removal ISO 22197-1:2007
Periodate – an alternative oxidant for testing potential water oxidation catalysts
Periodate is used as an alternative oxidant in the rapid screening of new potential water oxidation catalyst material powders.</p
Gas Sensing with Nano-Indium Oxides (In<sub>2</sub>O<sub>3</sub>) Prepared via Continuous Hydrothermal Flow Synthesis
A rapid, clean, and continuous hydrothermal route to
the synthesis of ca. 14 nm indium oxide (In<sub>2</sub>O<sub>3</sub>) nanoparticles using a superheated water flow at 400 °C and
24.1 MPa as a crystallizing medium and reagent is described. Powder
X-ray diffraction (XRD) of the particles revealed that they were highly
crystalline despite their very short time under hydrothermal flow
conditions. Gas sensing substrates were prepared from an In<sub>2</sub>O<sub>3</sub> suspension via drop-coating, and their gas sensing
properties were tested for response to butane, ethanol, CO, ammonia,
and NO<sub>2</sub> gases. The sensors showed excellent selectivity
toward ethanol, giving a response of 18–20 ppm