Mechanical Demands of the Hang Power Clean and Jump Shrug: A Joint-level Perspective

The purpose of this study was to investigate the joint- and load-dependent changes in the mechanical demands of the lower extremity joints during the hang power clean (HPC) and the jump shrug (JS). Fifteen male lacrosse players were recruited from an NCAA DI team, and completed three sets of the HPC and JS at 30%, 50%, and 70% of their HPC 1-Repetition Maximum (1-RM HPC) in a counterbalanced and randomized order. Motion analysis and force plate technology were used to calculate the positive work, propulsive phase duration, and peak concentric power at the hip, knee, and ankle joints. Separate three-way analysis of variances were used to determine the interaction and main effects of joint, load, and lift type on the three dependent variables. The results indicated that the mechanics during the HPC and JS exhibit joint-, load-, and lift-dependent behavior. When averaged across joints, the positive work during both lifts increased progressively with external load, but was greater during the JS at 30% and 50% of 1-RM HPC than during the HPC. The JS was also characterized by greater hip and knee work when averaged across loads. The joint-averaged propulsive phase duration was lower at 30% than at 50% and 70% of 1-RM HPC for both lifts. Furthermore, the load-averaged propulsive phase duration was greater for the hip than the knee and ankle joint. The jointaveraged peak concentric power was the greatest at 70% of 1-RM for the HPC and at 30% to 50% of 1-RM for the JS. In addition, the joint-averaged peak concentric power of the JS was greater than that of the HPC. Furthermore, the load-averaged peak knee and ankle concentric joint powers were greater during the execution of the JS than the HPC. However, the loadaveraged power of all joints differed only during the HPC, but was similar between the hip and knee joints for the JS. Collectively, these results indicate that compared to the HPC the JS is characterized by greater hip and knee positive joint work, and greater knee and ankle peak concentric joint power, especially if performed at 30 and 50% of 1-RM HPC. This study provides important novel information about the mechanical demands of two commonly used exercises and should be considered in the design of resistance training programs that aim to improve the explosiveness of the lower extremity joints

MLI: An API for Distributed Machine Learning

MLI is an Application Programming Interface designed to address the challenges of building Machine Learn- ing algorithms in a distributed setting based on data-centric computing. Its primary goal is to simplify the development of high-performance, scalable, distributed algorithms. Our initial results show that, relative to existing systems, this interface can be used to build distributed implementations of a wide variety of common Machine Learning algorithms with minimal complexity and highly competitive performance and scalability

Long-term discomfort evaluation: comparison of reported discomfort between a concept elevated driving posture and a conventional driving posture

Mounting a seat higher in a vehicle, in comparison to a conventional driving posture, will benefit vehicle design by reducing vehicles’ mass and as a result, possibly reducing emissions over the lifecycle of the vehicle. This paper reports on a study with the objective of comparing reported long-term discomfort between a concept elevated posture seat and a production conventional driving posture seat. A sample of 20 commercial drivers (10 males, 10 females) aged 19-65, were recruited for the study. A concept seat was developed from a seat fitting trial study [1] and a second rig was designed and constructed to replicate a benchmark production seat in a conventional LCV driving posture. In two separate trials, participants were required to perform a driving simulation task whilst exposed to whole-body vibration and report their discomfort in 10 minute intervals over 50-minutes of driving. Results indicated that at 50-minutes of driving, there were significant differences in reported discomfort for the right shoulder and the lower back between the postures, with the conventional posture having the higher discomfort ratings. Additionally, the musculoskeletal fatigue effects for both postures (progression of discomfort over time) fell in line with the literature

Design parameters for an elevated driving posture

Studies have shown that whilst emissions from passenger vehicles have fallen in the last 20-years, emissions from light commercial vehicles (LCVs) have risen. An elevated driving seat will result in a driving posture higher than in conventional vehicles and will benefit vehicle deign in terms of a reduction in vehicles’ mass potentially resulting in reduced emissions. This paper reports on a study with the objective of identifying the static seat design parameters for such an elevated seat. A sample of 20 commercial drivers (10 males, 10 females) aged 19-65, were recruited for the study. A driving rig was designed and built to offer nine key seat sub-component adjustments, deemed highly important to selecting a comfortable driving set up. Each sub-component was adjusted in an iterative process to define an optimum position for each driver and was then recorded along with participant verbatim. Results indicated that leg length is a good predictor of the seat height and the distance from the pedals (PH Gap) and that sitting height is a good predictor for the positioning of the backrest. The preferred length of the seat base was much shorter and the width much wider, respectively, than that observed in current LCVs

Tacrolimus rescue therapy for renal allograft rejection - Five-year experience

Over the 5 year period from 7/14/1989 until 5/24/1994, we have attempted graft salvage with tacrolimus conversion in a total of 169 patients (median age 33 years, range 2-75 years) with ongoing rejection on baseline CsA immunosuppression after failure of high dose corticosteroids and/or antilymphocyte preparations to reverse rejection. The indications for conversion to tacrolimus were ongoing, biopsy confirmed rejection in all patients. The median interval to tacrolimus conversion was 2 months (range 2 days to 55 months; mean 4.3±2.6 months) after transplantation. All patients had failed high dose corticosteroid therapy and 144 (85%) of the 169 patients had received at least one course of an antilymphocyte preparation plus high dose corticosteroid therapy prior to conversion. Twenty-eight patients (17%) were dialysis-dependent at the time of conversion owing to the severity of rejection. With a mean follow-up of 30.0±2.4 months (median 36.5 months, range 12-62 months), 125 of 169 patients (74%) have been successfully rescued and still have functioning grafts with a mean serum creatinine (SCR) of 2.3±1.1 mg/dl. Of the 144 patients previously treated with antilymphocyte preparations, 117 (81%) were salvaged. Of the 28 patients on dialysis at the time of conversion to tacrolimus, 13 (46%) continue to have functioning grafts (mean SCR 2.15±0.37 mg/dl) at a mean follow-up of 37.3±16.7 months. In the 125 patients salvaged, prednisone doses have been lowered from 28.0±9.0 mg/d (median 32, range 4-60 mg/d) preconversion to 8.5±4.1 mg/d (median 12 mg/d, range 2.5-20 mg/d) postconversion. Twenty-eight patients (22.4%) are currently receiving no steroids. This 5 year experience demonstrates that tacrolimus has sustained efficacy as a rescue agent for ongoing renal allograft rejection. Based on these data, we recommend that tacrolimus be used as an alternative to the conventional drugs used for antirejection therapy in renal transplantation

Ion-by-ion Cooling efficiencies

We present ion-by-ion cooling efficiencies for low-density gas. We use Cloudy (ver. 08.00) to estimate the cooling efficiencies for each ion of the first 30 elements (H-Zn) individually. We present results for gas temperatures between 1e4 and 1e8K, assuming low densities and optically thin conditions. When nonequilibrium ionization plays a significant role the ionization states deviate from those that obtain in collisional ionization equilibrium (CIE), and the local cooling efficiency at any given temperature depends on specific non-equilibrium ion fractions. The results presented here allow for an efficient estimate of the total cooling efficiency for any ionic composition. We also list the elemental cooling efficiencies assuming CIE conditions. These can be used to construct CIE cooling efficiencies for non-solar abundance ratios, or to estimate the cooling due to elements not explicitly included in any nonequilibrium computation. All the computational results are listed in convenient online tables.Comment: Submitted to ApJS. Electronic data available at http://wise-obs.tau.ac.il/~orlyg/ion_by_ion

Effect of atmospheric CO2 enrichment on root growth and carbohydrate allocation of Phaseolus spp.

A glasshouse experiment was conducted with plants of Phaseolus grown in liquid culture. Root growth parameters (biomass, diameter, length, growth rate, zone of cell division), root rheological components (wall extensibility, water potential yield threshold, water potential), shoot growth, carbon allocation, and abscisic acid (ABA) concentration were measured in Phaseolus acutifolius A. Gray at ambient (550 μmol mol−1) and elevated (700 μmol mol−1) atmospheric CO2 concentrations. For contrast, measurements of above‐ and belowground growth were conducted on Phaseolus vulgaris L. in the same treatments. Under nonlimiting conditions of water and nutrients, elevated CO2 increased root and shoot growth of P. acutifolius but not P. vulgaris. While root mass was increased by nearly 60% in P. acutifolius, there was no effect of atmospheric CO2 on any of the rheological components measured. In contrast, starch and ABA accumulated in roots of P. acutifolius. The concentration of starch in roots of P. acutifolius increased by 10‐fold, while root concentrations of ABA doubled. From the data it is concluded that CO2 enrichment is favorable for root growth in some species in that more carbon is allocated to belowground growth. In addition, ABA may play a role in growth responses and/or allocation of photosynthates at elevated CO2 in P. acutifolius

Quaternary sea level changes in Scotland

This paper summarises developments in understanding sea level change during the Quaternary in Scotland since the publication of the Quaternary of Scotland Geological Conservation Review volume Quaternary of Scotland in 1993. We present a review of progress in methodology, particularly in the study of sediments in isolation basins and estuaries as well as in techniques in the field and laboratory, which have together disclosed greater detail in the record of relative sea level (RSL) change than was available in 1993. However, progress in determining the record of RSL change varies in different areas. Studies of sediments and stratigraphy offshore on the continental shelf have increased greatly, but the record of RSL change there remains patchy. Studies onshore have resulted in improvements in the knowledge of rock shorelines, including the processes by which they are formed, but much remains to be understood. Studies of Late Devensian and Holocene RSLs around present coasts have improved knowledge of both the extent and age range of the evidence. The record of RSL change on the W and NW coasts has disclosed a much longer dated RSL record than was available before 1993, possibly with evidence of Meltwater Pulse 1A, while studies in estuaries on the E and SW coasts have disclosed widespread and consistent fluctuations in Holocene RSLs. Evidence for the meltwater pulse associated with the Early Holocene discharge of Lakes Agassiz-Ojibway in N America has been found on both E and W coasts. The effects of the impact of storminess, in particular in cliff-top storm deposits, have been widely identified. Further information on the Holocene Storegga Slide tsunami has enabled a better understanding of the event but evidence for other tsunami events on Scottish coasts remains uncertain. Methodological developments have led to new reconstructions of RSL change for the last 2000 years, utilising state-of-the-art GIA models and alongside coastal biostratigraphy to determine trends to compare with modern tide gauge and documentary evidence. Developments in GIA modelling have provided valuable information on patterns of land uplift during and following deglaciation. The studies undertaken raise a number of research questions which will require addressing in future work