Liquid hydrogen densitometer utilizes open-ended microwave cavity

Open-ended microwave cavity directly measures the density of flowing liquid, gaseous, or two-phase hydrogen. Its operation is based on derived relations between the cavity resonant frequency and the dielectric constant and density of hydrogen

Nodding feed antenna for communications with satellites in synchronous orbit

The design, fabrication, and performance of a parabolic, ground receiving antenna system with a feed that nods in one axis producing a maximum beam deviation 1.1 deg from boresight is described. The antenna design was: (1)to lower the weight (and the subsequent cost) of the supporting structure and the actuator motors for a tracking antenna by moving just the feed; (2) to use a manual tracking system eliminating the need for expensive electronic controls or computers; (3) to provide for several hours of unattended operation; and (4)to permit operation of the antenna by unskilled personnel. Also described are some physical and orbital phenomenon that effect the operation or design of the antenna. One is the motion of a nearly geostationary satellite due to gravitational forces from the sun, the moon, and other stellar bodies. Others are the rotation of the nodding axis and the feed polarization as a function of the location of the station on the earth. A comparison of per unit cost was made for one unit and a quantity of 100

An experimental study of the cryoentrainment pump Progress report

Cryoentrainment pump using liquid nitrogen and helium as cooling mediu

Characterization of MMIC devices for active array antennas

Certain aspects of monolithic microwave integrated circuit (MMIC) interconnectivity were investigated. Considerations that lead to preserving the inherently reproducible characteristics of the MMIC are proposed. It is shown that at radio frequencies (RF) greater than 20 GHz, the transition from the MMIC device to other transmission media must be an accurate RF match. It is proposed that the RF match is sufficiently critical to include the transition as part of the delivered MMIC package. The model to analyze several transitions is presented. This model consists of a succession of abrupt discontinuities in printed circuit transmission lines. The analysis of these discontinuities is achieved by the Spectral Galerkin technique, to establish the modes and mode matching, to generate the generalized S parameters of the individual discontinuities. Preliminary results achieved with this method are presented. It is concluded that special effects should be coordinated by the active array antenna industry toward standardization of MMIC packaging and characterization

A design concept for an MMIC microstrip phased array

A conceptual design for a microstrip phased array with monolithic microwave integrated circuit (MMIC) amplitude and phase controls is described. The MMIC devices used are 20 GHz variable power amplifiers and variable phase shifters recently developed by NASA contractors for applications in future Ka band advanced satellite communication antenna systems. The proposed design concept is for a general NxN element array of rectangular lattice geometry. Subarray excitation is incorporated in the MMIC phased array design to reduce the complexity of the beam forming network and the number of MMIC components required. The proposed design concept takes into consideration the RF characteristics and actual phyical dimensions of the MMIC devices. Also, solutions to spatial constraints and interconnections associated with currently available packaging designs are discussed. Finally, the design of the microstrip radiating elements and their radiation characteristics are examined

A fast acting electrical servo for the actuation of full span, Fowler-type wing flaps in DLC applications: A detail design study

The philosophy and detail design of an electro-mechanical actuator for Fowler-type wing flaps which have a response time constant of 0.025 seconds are described. A conventional electrical servomotor with a power rating twice the maximum power delivered to the load is employed along with adaptive, gain-scheduled feedback and various logic circuits, including one to remove electrical excitation from the motor during extended periods when no motion of the flap is desired

Poultry diseases in Western Australia

POULTRY diseases constitute a major factor in losses sustained by the industry. It is the aim of this article to provide a ready source of information to assist the poultry farmer in understanding the common disease conditions that he is likely to encounter and to suggest possible means of control and treatment

MMIC antenna technology development in the 30/20 gigahertz band

This paper presents a progress summary of NASA's efforts in developing 20 and 30 GHz GaAs MMIC devices and an advanced satellite communications antenna system using these devices. In the interest of preserving resources such as frequency spectrum and orbital space the antenna system is being developed with multiple fixed spot beams and multiple scanning spot beams. NASA set high goals for the MMIC development to pushc GaAs technology. These goals and the main features of the MMIC devices are discussed. Some packaging and characterization considerations are also discussed. The 20 GHz transmit antenna and 30 GHz receive antenna are being developed separately. The approach selected is to perform contractual configuration studies, purchase a 20-GHz experimental antenna system (EAS) and perform in-house evaluation. The features and key specifications of the EAS are discussed. Additional supporting technologies such as effects of coupling on modest sized arrays, MMIC matching techniques, in-house analytical capability, wideband and dual frequency microstrip patch array development, and MMIC packaging techniques are described. Some plans for future are also discussed

Primjena visokotemperaturne DTA za mikrolegirane čelike

Paper deals with investigation of phase transitions temperatures for selected real grades of micro-alloyed steels. Temperatures of characteristic phase transitions were obtained using Setaram SETSYS 18TM. The DTA technique was selected for the study of micro-alloyed steels. Temperatures of phase transitions (liquidus, solidus etc.) were obtained. Influence of admixed and alloyed elements on shift of temperatures was investigated. Resulting data were compared with temperatures of phase transitions of Fe-C, Fe-Mn systems and with temperatures calculated according to relations published in available literature. Thermodynamic-kinetic solidification model IDS was used to calculate characteristic equilibrium temperatures of investigated systems.Članak se bavi studijom faznih transformacija odabranih mikrolegiranih čelika. Temperaturne karakteristike faznih transformacija su istraživane rabljenjem laboratorijskog sustava Setaram SETSYS-18TM. DTA tehnika je odabrana za studij mikrolegiranih čelika. Temperature faznih transformacija (likvidus, solidus itd.) su dobivene. Istraživan je utjecaj primjesa i legirajućih elemenata na promjene temperatura faznih transformacija. Dobiveni experimentalni rezultati su bili uspoređeni s temperaturama faznih transformacija sistema Fe-C, Fe-Mn a i s temperaturama izračunatih iz dostupne literature. Termodinamičkokinetički model skrućivanja IDS je rabljen za izračun karakterističnih ravnotežnih temperatura faznih transformacija istraživanih sustava