Co-firing Bosnian coals with woody biomass: Experimental studies on a laboratory-scale furnace and 110 MWe power unit

This paper presents the findings of research into cofiring two Bosnian cola types, brown coal and lignite, with woody biomass, in this case spruce sawdust. The aim of the research was to find the optimal blend of coal and sawdust that may be substituted for 100% coal in large coal-fired power stations in Bosnia and Herzegovina. Two groups of experimental tests were performed in this study: laboratory testing of co-firing and trial runs on a large-scale plant based on the laboratory research results. A laboratory experiment was carried out in an electrically heated and entrained pulverized-fuel flow furnace. Coal-sawdust blends of 93:7% by weight and 80:20% by weight were tested. Co-firing trials were conducted over a range of the following process variables: process temperature, excess air ratio and air distribution. Neither of the two coal-sawdust blends used produced any significant ash-related problems provided the blend volume was 7% by weight sawdust and the process temperature did not exceed 1250ºC. It was observed that in addition to the nitrogen content in the co-fired blend, the volatile content and particle size distribution of the mixture also influenced the level of NOx emissions. The brown coal-sawdust blend generated a further reduction of SO2 due to the higher sulphur capture rate than for coal alone. Based on and following the laboratory research findings, a trial run was carried out in a large-scale utility - the Kakanj power station, Unit 5 (110 MWe), using two mixtures; one in which 5%/wt and one in which 7%/wt of brown coal was replaced with sawdust. Compared to a reference firing process with 100% coal, these co-firing trials produced a more intensive redistribution of the alkaline components in the slag in the melting chamber, with a consequential beneficial effect on the deposition of ash on the superheater surfaces of the boiler. The outcome of the tests confirms the feasibility of using 7%wt of sawdust in combination with coal without risk to the efficiency of the unit, its combustion process and with the benefits of emissions reductions. Furthermore, they show that no modification to the existing coal transport system and boiler equipment is necessary to achieve this outcome

Mapping the potential for decentralized energy generation based on RES in Western Balkans

Although the countries of the Western Balkans are mostly electrified, there are still regions which do not have access to the electricity network or where the network capacity is insufficient. For the most part such areas are under special care of the state (i.e. underdeveloped, devastated by war, depopulated), on islands or in mountainous regions. Since the decentralized energy generation covers a broad range of technologies, including many renewable energy technologies that provide small-scale power at sites close to the users, such concept could be of interest for these locations. This paper identfies the areas in Western Balkans where such systems could be applied Consideration is given to geographical locations as well as possible applications. Wind hydro, solar photovoltaic, and biomass conversion systems were taken into consideration. Since the renewable energy sources data for Western Balkans region are rather scarce, the intention was to give a survey of the present situation and an estimate of future polential for decentralized energy generation based on renewable energy sources. The decentralized energy generation based on renewable energy sources in Western Balkans will find its niche easier for the users that will produce electricity for their own needs and for the users located in remote rural areas (off-grid applications)