Instruments and data aquisition systems for research on trawl nets

Catching methods and ways to improve them have been engaging the attention of fishermen from time immemorial. This was done mostly by trial and error methods, as most of the earlier investigations were primarily directed towards solution of biological problems related to fisheries. In recent years several fisheries laboratories have taken up studies on the working principles of many gears such as trawls, gill nets, round haul nets etc. with the aid of instruments developed for the purpose. The purpose of this article is to review the progress made in this field and in the development of telemetering instruments and continuous data acquisition systems

Instrument for the measurement of the fore and aft tilt of otterboards

A portable self-contained instrument has been designed and developed for the measurement of the Fore and Aft tilt of otter boards within the range —22° to + 22° with an accuracy of ± 1°. An underwater transducer fitted on the otter board converts its tilt into corresponding electrical resistance which is measured in an ohmmeter on board, both being connected by electric cable

In situ temperature and salinity meter

Development of a portable self-contained electronic meter for on the spot determination of temperature and salinity is described. Instant and remote measurements of temperature and salinity of sea and estuarine waters in the range of 25-30°C and 30-35°C for temperature with an accuracy ± 0.05°C and 0-37‰ and 31-37‰ for salinity with an accuracy of ± 0.2‰ and ± 0.05‰ respectively are possible with the instrument. The temperature compensations of the salinity measurements are done manually with the help of temperature charts. The temperature and salinity measurements can be fed to continuous recorders

Underwater warp tension meter

A self-contained electronic solid-state instrument capable of measuring the tension between the different parts of a trawl net in operation, has been designed and developed for the measurement in the range 0 to 300 kg with an accuracy of ± 2 kg. The instrument is useful for measuring the resistance to motion of various accessories of a trawl net. It consists of an inductive type underwater tension transducer and an electronic indicating meter kept on board the vessel, both the units being connected by electric cable

Portable electronic warp load meter

A portable type warp load meter has been developed for the use in fishing trawlers. The instrument enables to monitor the warp load in fishing trawlers accurately and easily without disturbing the routine fishing operations. The instrument can be used in several other places like cranes, bollard tests for marine engines, dry docks etc. especially when the operation has to be conducted easily without disturbing the load system. The information displayed in micro ammeter in the range 0 to 1000 kg can be fed to continuous recorders for detailed analysis and permanent records

Indigenous substitutes for "Lignum vitae" for making stern bearings for fishing boats

Difficulties are very often encountered in selecting proper material for making stern bearings for fishing boats. Conventional materials such as white metal, bronze etc. wear out too fast also causing considerable wear to the propeller shaft. Lignum-vitae, a natural wood commonly used for this purpose, is not available on a commercial scale in our country. Results of trials carried out to find out suitable substitutes for lignum-vitae from among indigenous timbers are presented in this paper

Freezer temperature monitor and alarm

An electronic instrument for measuring freezer temperature in the range of +40 to -40°C is described. The salient features of the instrument are remote display (digital and analogue versions with an accuracy of ± 0.1 and ± 0.5°C respectively) and provision for continuous record of temperature. Two types of sensors using thermistor and P. N. function of transistor were used for temperature sensing

Autobrinometer

An instrument developed for the rapid and accurate measurement of brine concentrations during blanching without disturbing the routine blanching operation is described. The concentration is sensed by a platinum electrode conductivity cell and displayed in a moving coil meter after conversion of the electrical signals into D.C. voltage. The instrument can measure in the range 5 to 12% with an accuracy of ± 1%. The errors caused mostly are those due to wide temperature variations of the brine between 95 to 102°C and the unknown quantities of protein

Development of a fishing log for use in trawlers

The paper describes the technical and operational features of a composite equipment for simultaneous measurement of five important parameters, warp load, boat speed, water temperature, water salinity and air temperature pertaining to the craft, gear and the environment. The equipment is designed for continuous measurement in small and medium crafts easily without disturbance to routine fishing operations. The system operated on 9V supply, is suitable for portable operations from one vessel to another. The compact electronic meter kept in the wheel-house displays the data one by one in engineering units

Not Available

Not AvailableThe successful implementation of some instrumentation programmes for acquiring marine environmental data are reported. The instruments are used for instantaneous measurements of water current and direction, salinity, temperature and depth of operation. Sensors with novel features were developed and used in water current meter and salinity -temperature-depth meter. The sensors designed with very low impedance and high level signal outputs have rendered the instruments to be quite reliable with comparatively simpler electronics. A sixteen channel data acquisition system designed for automatic of coastal environmental data is reported.Not Availabl