308 research outputs found
A radiation-hard dual-channel 12-bit 40 MS/s ADC prototype for the ATLAS liquid argon calorimeter readout electronics upgrade at the CERN LHC
The readout electronics upgrade for the ATLAS Liquid Argon Calorimeters at
the CERN Large Hadron Collider requires a radiation-hard ADC. The design of a
radiation-hard dual-channel 12-bit 40 MS/s pipeline ADC for this use is
presented. The design consists of two pipeline A/D channels each with four
Multiplying Digital-to-Analog Converters followed by 8-bit
Successive-Approximation-Register analog-to-digital converters. The custom
design, fabricated in a commercial 130 nm CMOS process, shows a performance of
67.9 dB SNDR at 10 MHz for a single channel at 40 MS/s, with a latency of 87.5
ns (to first bit read out), while its total power consumption is 50 mW/channel.
The chip uses two power supply voltages: 1.2 and 2.5 V. The sensitivity to
single event effects during irradiation is measured and determined to meet the
system requirements
Recommended from our members
Readout electronics for a High-Rate CSC detector
A readout system for a high-rate muon Cathode Strip Chamber (CSC) is described. The system, planned for use in the forward region of the ATLAS muon spectrometer, uses two custom CMOS integrated circuits to achieve good position resolution at a flux of up to 2,500 tracks/cm{sup 2}/s
Characterization of the coherent noise, electromagnetic compatibility and electromagnetic interference of the ATLAS EM calorimeter Front End Board
Search for flavor-changing neutral currents and lepton-family-number violation in two-body D0 decays
Results of a search for the three neutral charm decays, D0 -> mu e, D0 -> mu
mu, and D0 -> e e, are presented. This study was based on data collected in
Experiment 789 at the Fermi National Accelerator Laboratory using 800 GeV/c
proton-Au and proton-Be interactions. No evidence is found for any of the
decays. Upper limits on the branching ratios, at the 90% confidence level, are
obtained.Comment: 28 pages, 18 figures. Submitted to Physical Review
Long-Baseline Neutrino Facility (LBNF) and Deep Underground Neutrino Experiment (DUNE) Conceptual Design Report Volume 2: The Physics Program for DUNE at LBNF
The Physics Program for the Deep Underground Neutrino Experiment (DUNE) at
the Fermilab Long-Baseline Neutrino Facility (LBNF) is described
The Long-Baseline Neutrino Experiment: Exploring Fundamental Symmetries of the Universe
The preponderance of matter over antimatter in the early Universe, the
dynamics of the supernova bursts that produced the heavy elements necessary for
life and whether protons eventually decay --- these mysteries at the forefront
of particle physics and astrophysics are key to understanding the early
evolution of our Universe, its current state and its eventual fate. The
Long-Baseline Neutrino Experiment (LBNE) represents an extensively developed
plan for a world-class experiment dedicated to addressing these questions. LBNE
is conceived around three central components: (1) a new, high-intensity
neutrino source generated from a megawatt-class proton accelerator at Fermi
National Accelerator Laboratory, (2) a near neutrino detector just downstream
of the source, and (3) a massive liquid argon time-projection chamber deployed
as a far detector deep underground at the Sanford Underground Research
Facility. This facility, located at the site of the former Homestake Mine in
Lead, South Dakota, is approximately 1,300 km from the neutrino source at
Fermilab -- a distance (baseline) that delivers optimal sensitivity to neutrino
charge-parity symmetry violation and mass ordering effects. This ambitious yet
cost-effective design incorporates scalability and flexibility and can
accommodate a variety of upgrades and contributions. With its exceptional
combination of experimental configuration, technical capabilities, and
potential for transformative discoveries, LBNE promises to be a vital facility
for the field of particle physics worldwide, providing physicists from around
the globe with opportunities to collaborate in a twenty to thirty year program
of exciting science. In this document we provide a comprehensive overview of
LBNE's scientific objectives, its place in the landscape of neutrino physics
worldwide, the technologies it will incorporate and the capabilities it will
possess.Comment: Major update of previous version. This is the reference document for
LBNE science program and current status. Chapters 1, 3, and 9 provide a
comprehensive overview of LBNE's scientific objectives, its place in the
landscape of neutrino physics worldwide, the technologies it will incorporate
and the capabilities it will possess. 288 pages, 116 figure
ATLAS liquid argon calorimeter back end electronics
Subm. to Journal of InstrumentationThe Liquid Argon calorimeters play a central role in the ATLAS (A Toroidal LHC Apparatus) experiment. The environment at the Large Hadron Collider (LHC) imposes strong constraints on the detectors readout systems. In order to achieve very high precision measurements, the detector signals are processed at various stages before reaching the Data Acquisition system (DAQ). Signals from the calorimeter cells are received by on-detector Front End Boards (FEB), which sample the incoming pulse every 25ns and digitize it at a trigger rate of up to 75~kHz. Off-detector Read Out Driver (ROD) boards further process the data and send reconstructed quantities to the DAQ while also monitoring the data quality. In this paper, the ATLAS Liquid Argon electronics chain is described first, followed by a detailed description of the off-detector readout system. Finally, the tests performed on the system are summarized
Structural optimization through biomimetic-inspired material-specific application of plant-based natural fiber-reinforced polymer composites (Nfrp) for future sustainable lightweight architecture
- …
