12 research outputs found
Intake Design for an Atmosphere-Breathing Electric Propulsion System (ABEP)
Challenging space missions include those at very low altitudes, where the
atmosphere is source of aerodynamic drag on the spacecraft. To extend the
lifetime of such missions, an efficient propulsion system is required. One
solution is Atmosphere-Breathing Electric Propulsion (ABEP) that collects
atmospheric particles to be used as propellant for an electric thruster. The
system would minimize the requirement of limited propellant availability and
can also be applied to any planetary body with atmosphere, enabling new
missions at low altitude ranges for longer times. IRS is developing, within the
H2020 DISCOVERER project, an intake and a thruster for an ABEP system. The
article describes the design and simulation of the intake, optimized to feed
the radio frequency (RF) Helicon-based plasma thruster developed at IRS. The
article deals in particular with the design of intakes based on diffuse and
specular reflecting materials, which are analysed by the PICLas DSMC-PIC tool.
Orbital altitudes km and the respective species based on the
NRLMSISE-00 model (O, , , He, Ar, H, N) are investigated for several
concepts based on fully diffuse and specular scattering, including hybrid
designs. The major focus has been on the intake efficiency defined as
, with the incoming particle
flux, and the one collected by the intake. Finally, two
concepts are selected and presented providing the best expected performance for
the operation with the selected thruster. The first one is based on fully
diffuse accommodation yielding to and the second one based un
fully specular accommodation yielding to . Finally, also the
influence of misalignment with the flow is analysed, highlighting a strong
dependence of in the diffuse-based intake while, ...Comment: Accepted Versio
Inductive Plasma Thruster (IPT) design for an Atmosphere-Breathing Electric Propulsion System (ABEP)
Challenging space missions include those at very low altitudes, where the atmosphere is source of aerodynamic drag on the spacecraft, therefore an efficient propulsion system is required to extend the mission lifetime. One solution is Atmosphere-Breathing Electric Propulsion (ABEP). It collects atmospheric particles to use as propellant for an electric thruster. This would minimize the requirement of limited propellant availability. The system could be applied to any planet with atmosphere, enabling new mission at these altitude ranges for continuous orbiting. Challenging is also the presence of reactive chemical species, such as atomic oxygen in Earth orbit. Such components are erosion source of (not only) propulsion system components, i.e. acceleration grids, electrodes, and discharge channels of conventional EP systems (RIT and HET). IRS is developing within the DISCOVERER project an intake and a thruster for an ABEP system. This paper deals with the design and first operation of the inductive plasma thruster (IPT) developed at IRS. The paper describes its design aided by numerical tools such as HELIC and ADAMANT. Such a device is based on RF electrodeless discharge aided by externally applied static magnetic field. The IPT is composed by a movable injector, to variate the discharge channel length, and a movable electromagnet to variate position and intensity of the magnetic field. By changing these parameters along with a novel antenna design for electric propulsion, the aim is to achieve the highest efficiency for the ionization stage by enabling the formation of helicon-based discharge. Finally, the designed IPT is presented and the feature of the birdcage antenna highlighted
RF Helicon-based Inductive Plasma Thruster (IPT) Design for an Atmosphere-Breathing Electric Propulsion system (ABEP)
Challenging space missions include those at very low altitudes, where the atmosphere is source of aerodynamic drag on the spacecraft. To extend such missions lifetime, an efficient propulsion system is required. One solution is Atmosphere-Breathing Electric Propulsion (ABEP). It collects atmospheric particles to be used as propellant for an electric thruster. The system would minimize the requirement of limited propellant availability and can also be applied to any planet with atmosphere, enabling new mission at low altitude ranges for longer times. Challenging is also the presence of reactive chemical species, such as atomic oxygen in Earth orbit. Such species cause erosion of (not only) propulsion system components, i.e. acceleration grids, electrodes, and discharge channels of conventional EP systems. IRS is developing within the DISCOVERER project, an intake and a thruster for an ABEP system. The paper describes the design and implementation of the RF helicon-based inductive plasma thruster (IPT). This paper deals in particular with the design and implementation of a novel antenna called the birdcage antenna, a device well known in magnetic resonance imaging (MRI), and also lately employed for helicon-wave based plasma sources in fusion research. This is aided by the numerical tool XFdtd®. The IPT is based on RF electrodeless operation aided by an externally applied static magnetic field. The IPT is composed by an antenna, a discharge channel, a movable injector, and a solenoid. By changing the operational parameters along with the novel antenna design, the aim is to minimize losses in the RF circuit, and accelerate a quasi-neutral plasma plume. This is also to be aided by the formation of helicon waves within the plasma that are to improve the overall efficiency and achieve higher exhaust velocities. Finally, the designed IPT with a particular focus on the birdcage antenna design procedure is presented
A review of gas-surface interaction models for orbital aerodynamics applications
Renewed interest in Very Low Earth Orbits (VLEO) - i.e. altitudes below 450 km - has led to an increased demand for accurate environment characterisation and aerodynamic force prediction. While the former requires knowledge of the mechanisms that drive density variations in the thermosphere, the latter also depends on the interactions between the gas-particles in the residual atmosphere and the surfaces exposed to the flow. The determination of the aerodynamic coefficients is hindered by the numerous uncertainties that characterise the physical processes occurring at the exposed surfaces. Several models have been produced over the last 60 years with the intent of combining accuracy with relatively simple implementations. In this paper the most popular models have been selected and reviewed using as discriminating factors relevance with regards to orbital aerodynamics applications and theoretical agreement with gas-beam experimental data. More sophisticated models were neglected, since their increased accuracy is generally accompanied by a substantial increase in computation times which is likely to be unsuitable for most space engineering applications. For the sake of clarity, a distinction was introduced between physical and scattering kernel theory based gas-surface interaction models. The physical model category comprises the Hard Cube model, the Soft Cube model and the Washboard model, while the scattering kernel family consists of the Maxwell model, the Nocilla-Hurlbut-Sherman model and the Cercignani-Lampis-Lord model. Limits and assets of each model have been discussed with regards to the context of this paper. Wherever possible, comments have been provided to help the reader to identify possible future challenges for gas-surface interaction science with regards to orbital aerodynamic applications
Experimental Results from the Satellite for Orbital Aerodynamics Research (SOAR) Mission
Launch, Operations, and First Experimental Results of the Satellite for Orbital Aerodynamics Research (SOAR)
The Satellite for Orbital Aerodynamics Research (SOAR) is a 3U CubeSat that has been designed to investigate the aerodynamic performance of different materials at low orbital altitudes. The spacecraft has been developed within the scope of DISCOVERER, a Horizon 2020 project that aims to develop foundational technologies to enable sustainable operations of Earth observation spacecraft in very low Earth orbits (VLEO) i.e., those below 450 km. SOAR features two payloads: i) a set of steerable fins that can expose different materials to the oncoming atmospheric flow developed by The University of Manchester, and ii) a forward-facing ion and neutral mass spectrometer (INMS) that provides in-situ measurements of the atmospheric density, flow composition, and velocity from the Mullard Space Science Laboratory (MSSL) of University College London. These payloads enable characterisation of the aerodynamic performance of different materials at very low altitudes with the aim to advance understanding of the underlying gas-surface interactions in rarefied flow environments. The satellite will also be used to test novel aerodynamic attitude control methods and perform atmospheric characterisation in the VLEO altitude range. SOAR will perform the first in-orbit test of two novel materials that are expected to have atomic oxygen erosion resistance and drag-reducing properties, providing valuable in-orbit validation data for ongoing ground-based experimentation. Such materials hold the promise for extending operations at lower altitudes with benefits particularly for Earth observation and communications satellites that can correspondingly be reduced in size and cost. The platform for SOAR is largely based on GOMX-3 heritage and the spacecraft was assembled, integrated, and tested by GomSpace A/S. The satellite was launched on the SpX-22 commercial resupply service mission to the International Space Station in on 3rd June 2021 was subsequently deployed into orbit on the 14th June 2021. This paper presents the final preparations of SOAR prior to launch and provides an overview of the planned operations of the spacecraft following deployment into orbit.Article signat per 30 autors/res: Nicholas H. Crisp, Alejandro Macario-Rojas, Peter C.E. Roberts, Steve Edmondson, Sarah J. Haigh, Brandon E.A. Holmes, Sabrina Livadiotti, Vitor T.A. Oiko, Katharine L. Smith, Luciana A. Sinpetru, Jonathan Becedas, Valeria Sulliotti-Linner, Simon Christensen, Virginia Hanessian, Thomas K. Jensen, Jens Nielsen, Morten Bisgaard, Yung-An Chan, Georg H. Herdrich, Francesco Romano, Stefanos Fasoulas, Constantin Traub, Daniel Garcia-Almiñana, Silvia Rodriguez-Donaire, Miquel Sureda, Dhiren Kataria, Badia Belkouchi, Alexis Conte, Simon Seminari, Rachel VillainObjectius de Desenvolupament Sostenible::9 - Indústria, Innovació i InfraestructuraPostprint (published version