47 research outputs found
Recommended from our members
Tailor-Made Functional Polymethacrylates with Dual Characteristics of Self-Healing and Shape-Memory Based on Dynamic Covalent Chemistry
New shape memory polymers with self-healing behavior are obtained by thermoreversible DielsâAlder (DA) cross-linking of a furfuryl group-containing star-block copolymer with 1,1'-(methylenedi-4,1-phenylene)bismaleimide. The star-block copolymer consisting of a 3-arm polycaprolactone (PCL) core and a polyfurfuryl methacrylate shell is synthesized by reversible additionâfragmentation chain transfer (RAFT) polymerization. For this, a 3-arm macro-RAFT agent based on PCL is converted with an appropriate amount of furfuryl methacrylate in the presence of a radical initiator. Films of the DA network are partly insoluble at ambient temperatures. After annealing at 120 °C the films become completely soluble because of the progressing retro-DA reaction. Evaporation of the solvent and subsequent annealing at 60 °C restores the original insoluble state of the material. By means of a scratch test and tensile tests on cut and subsequently mended samples it is shown that the retro-DA reaction facilitates self-healing. Additionally, the films show pronounced shape memory effects with reasonable shape recovery and fixity ratios, which are attributed to the melting and crystallization of the PCL phase. © 2020 The Authors. Published by WILEY-VCH Verlag GmbH & Co. KGaA, Weinhei
Recommended from our members
Dual Stimuli-Responsive Self-Assembly Behavior of a Tailor-Made ABC-Type Amphiphilic Tri-Block Copolymer
This investigation describes the synthesis of a dual stimuli-responsive, amphiphilic ABC tri-block copolymer (BCP) based on the functional monomers via RAFT polymerization. In this case, ABC-type BCP was prepared based on N-isopropylacrylamide, n-butyl acrylate, and 4-vinylpyridine in DMF solvent using cyanomethyl dodecyl trithiocarbonate as the RAFT agent and azobisisobutyronitrile as a thermal initiator in a subsequent macro-RAFT approach, respectively. The BCPs were characterized by SEC, 1H-NMR, FTIR spectroscopy, and DSC analyses. Temperature and pH-dependent properties of the smart BCP micelles in aqueous medium were investigated using dynamic light scattering. Transmission electron microscopic images were taken at cryogenic and dry conditions to study the morphology of molecular assemblies of block copolymers in an aqueous medium. The phase and topographical images were captured by atomic force microscopy to understand the assembly of block copolymers in solvents of different polarities. The morphology of BCP micelles was transformed from flower-like to spherical in the presence of solvents with different polarities (H2O or CHCl3). © 2020 The Authors. Journal of Polymer Science published by Wiley Periodicals, Inc
Recommended from our members
Thermoresponsive zwitterionic poly(phosphobetaine) microgels: Effect of macro-RAFT chain length and cross-linker molecular weight on their antifouling properties
Adsorption of proteins on biological surfaces is a detrimental phenomenon that reduces the work-life of the implants in various biomedical applications. Here, we synthesized a new class of thermoresponsive zwitterionic poly(phosphobetaine) (PMPC) microgel with excellent surface antifouling property by macro-RAFT mediated thiol-epoxy click reaction. End-group modified zwitterionic PMPC homopolymers with well-defined molecular weight and narrow dispersity were grafted onto poly(N-vinylcaprolactam-co-glycidyl methacrylate) (PVG) copolymer backbone followed by addition of a cross-linker, leading to microgel formation. While no upper critical solution temperature (UCST) was found in poly(N-vinylcaprolactam-co-glycidyl methacrylate-g-2-methacryloyloxyethyl phosphorylcholine) (PVGP) graft copolymers, the corresponding microgels exhibited both UCST and lower critical solution temperature (LCST) transitions, related to the swelling and collapse of PMPC and poly (N-vinylcaprolactam) (PVCL) components respectively. An increase in the molecular chain length of the PMPC increased the shifting of UCST and LCST of the microgels to higher temperatures, due to the ability of zwitterionic groups to coordinate a large number of water molecules. The effect of the variation in the molecular weights of amphiphilic poly(ethylene glycol) diamine (PEG-NH2) cross-linker was also reflected in both temperature and salt responsiveness of the microgels. The efficacy of the microgels as potential antifouling materials was further studied by fluorescence microscopy and XPS analysis on microgel coatings treated with FITC-BSA solution and pure BSA solution respectively. Lower protein adsorption was observed for microgels grafted with higher molecular chain length of PMPC, whereas, the microgels synthesized using higher molecular weight PEG-NH2 diamine cross-linker displayed greater protein adsorption on their surfaces
Recommended from our members
Tuning the Properties and Self-Healing Behavior of Ionically Modified Poly(isobutylene-co-isoprene) Rubber
The focus of this work is on the nature of self-healing of ionically modified rubbers obtained by reaction of brominated poly(isobutylene-co-isoprene) rubber (BIIR) with various alkylimidazoles such as 1-methylimidazole, 1-butylimidazole, 1-hexylimidazole, 1-nonylimidazole, and 1-(6-chlorohexyl)-1H-imidazole. Based on stress-strain and temperature dependent DMA measurements, a structural influence of the introduced ionic imidazolium moieties on the formation of ionic clusters and, as a consequence, on the mechanical strength and self-healing behavior of the samples could be evidenced. These results are fully supported by a molecular-level assessment of the network structure (cross-link and constraint density) and the dynamics of the ionic clusters using an advanced proton low-field NMR technique. The results show distinct correlations between the macroscopic behavior and molecular chain dynamics of the modified rubbers. In particular, it is shown that the optimization of material properties with regard to mechanical and self-healing behavior is limited by opposing tendencies. Samples with reduced chain dynamics exhibit superior mechanical behavior but lack on self-healing behavior. In spite of these limitations, the overall performance of some of our samples including self-healing behavior exceeds distinctly that of other self-healing rubbers described in the literature so far
Copolymerization of 2,2,3,3,4,4,4-heptafluorobutyl acrylate with butyl acrylate via RAFT polymerization
Copolymers of fluoroacrylates have interesting properties like excellent resistance to chemicals, oils and fuels, high thermal stability and high hydrophobicity. This investigation reports the copolymerization of 2,2,3,3,4,4,4-heptafluorobutyl acrylate (HFBA) and butyl acrylate (BA), i.e. the two monomers having semi-fluorinated and non-fluorinated pendant groups of equal length (C-4) via reversible addition-fragmentation chain transfer (RAFT) polymerization. The copolymers had controlled molecular weights and narrow polydispersity indices. The copolymer compositions were determined by H-1 NMR spectroscopy. The reactivity ratios of HFBA and butyl acrylate BA were calculated by using three different models viz., Finemann-Ross (FR), inverted Finemann-Ross (IFR) and Kelen-Tudos (KT). The reactivity ratios were determined as r(HFBA) = 0.65 and r(BA) = 0.83, by the FR method. Thermal stability and glass transition temperature of the copolymers increased with the increase in HFBA content. The water contact angle (WCA) of the copolymers increased with increase in HFBA content indicating increasing hydrophobicity of the copolymer having higher HFBA content. (C) 2014 Published by Elsevier B.V
Homogeneous catalytic hydrogenation of natural rubber using RhCl(PPh<SUB>3</SUB>)<SUB>3</SUB>
Hydrogenation is an important method of chemical modification, which improves the physical, chemical, and thermal
properties of diene elastomers. It is also a useful method for preparation of polymers with unusual monomer sequences. Natural
rubber (NR) could be quantitatively hydrogenated to a strictly alternating ethylene-propylene copolymer using a homogeneous
RhCl(PPh<SUB>3</SUB>)<SUB>3</SUB> catalyst. The effect of concentration of rubber, catalyst and triphenyl phosphine,
temperature, pressure, and solvent on the course of hydrogenation were evaluated. The thermal properties of the hydrogenated NR are
compared with NR
TailorâMade Functional Polymethacrylates with Dual Characteristics of SelfâHealing and ShapeâMemory Based on Dynamic Covalent Chemistry
New shape memory polymers with self-healing behavior are obtained by thermoreversible DielsâAlder (DA) cross-linking of a furfuryl group-containing star-block copolymer with 1,1'-(methylenedi-4,1-phenylene)bismaleimide. The star-block copolymer consisting of a 3-arm polycaprolactone (PCL) core and a polyfurfuryl methacrylate shell is synthesized by reversible additionâfragmentation chain transfer (RAFT) polymerization. For this, a 3-arm macro-RAFT agent based on PCL is converted with an appropriate amount of furfuryl methacrylate in the presence of a radical initiator. Films of the DA network are partly insoluble at ambient temperatures. After annealing at 120 °C the films become completely soluble because of the progressing retro-DA reaction. Evaporation of the solvent and subsequent annealing at 60 °C restores the original insoluble state of the material. By means of a scratch test and tensile tests on cut and subsequently mended samples it is shown that the retro-DA reaction facilitates self-healing. Additionally, the films show pronounced shape memory effects with reasonable shape recovery and fixity ratios, which are attributed to the melting and crystallization of the PCL phase. © 2020 The Authors. Published by WILEY-VCH Verlag GmbH & Co. KGaA, Weinhei