Protonation and Photocatalytic Activity of the Rb 2

The Rb2La2Ti3O10 layered oxide was synthesized by the solid-state method. Three phases with different protonation degrees and intercalated water contents were obtained from the initial compound by the treatment with distilled water and hydrochloric acid. The obtained samples were characterized by powder X-ray diffraction, SEM, X-ray microanalysis, BET, DRS, and TG. It was found that the complete ion exchange of Rb+ for H+ in the layered oxide Rb2La2Ti3O10 proceeds through the formation of two metastable intermediate phases with average protonation degrees of 0.5 and 0.75, which successively transform from one to another. Each of these phase transformations is accompanied not only by the contraction of the interlayer distance but also by the displacement of adjacent perovskite layers by 1/2 of the cell parameter which results in the change in the space group. The photocatalytic activity of obtained samples decreases with the increase in the protonation degree, which correlates with the decrease in the intercalated water content

Highly Efficient Liquid-Phase Exfoliation of Layered Perovskite-like Titanates HLnTiO₄ and H₂Ln₂Ti₃O₁₀ (Ln = La, Nd) into Nanosheets

Nanosheets of layered perovskite-like oxides attract researchers as building blocks for the creation of a wide range of demanded nanomaterials. However, Ruddlesden–Popper phases are difficult to separate into nanosheets quantitatively via the conventional liquid-phase exfoliation procedure in aqueous solutions of bulky organic bases. The present study has considered systematically a relatively novel and efficient approach to a high-yield preparation of concentrated suspensions of perovskite nanosheets. For this, the Ruddlesden–Popper titanates HLnTiO4 and H2Ln2Ti3O10 (Ln = La, Nd) have been intercalated by n-alkylamines with various chain lengths, exposed to sonication in aqueous tetrabutylammonium hydroxide (TBAOH) and centrifuged to separate the nanosheet-containing supernatant. The experiments included variations of a wide range of conditions, which allowed for the achievement of impressive nanosheet concentrations in suspensions up to 2.1 g/L and yields up to 95%. The latter were found to strongly depend on the length of intercalated n-alkylamines. Despite the less expanded interlayer space, the titanates modified with short-chain amines demonstrated a much higher completeness of liquid-phase exfoliation as compared to those with long-chain ones. It was also shown that the exfoliation efficiency depends more on the sample stirring time in the TBAOH solution than on the sonication duration. Analysis of the titanate nanosheets obtained by means of dynamic light scattering, electron and atomic force microscopy revealed their lateral sizes of 30–250 nm and thickness of 2–4 nm. The investigated exfoliation strategy appears to be convenient for the high-yield production of perovskite nanosheet-based materials for photocatalytic hydrogen production, environmental remediation and other applications

Protonated Forms of Layered Perovskite-Like Titanate NaNdTiO4: Neutron and X-ray Diffraction Structural Analysis

Structures of partially and completely protonated Ruddlesden–Popper phases, H0.7Na0.3NdTiO4·0.3H2O and HNdTiO4, have been established by means of neutron and X-ray diffraction analysis and compared among themselves as well as with that of the initial titanate NaNdTiO4. It was shown that while interlayer sodium cations in the partially protonated form are coordinated by nine oxygen atoms, including one related to intercalated water, in the fully protonated compound the ninth oxygen proves to be an axial anion belonging to the opposite slab of titanium-oxygen octahedra. Moreover, the partially protonated titanate was found to significantly differ from the other two in the octahedron distortion pattern. It is characterized by a weakly pronounced elongation of the octahedra towards the Nd-containing interlayer space making Ti4+ cations practically equidistant from both axial oxygen atoms, which is accompanied by a low-frequency shift of the bands relating to the asymmetric stretching mode of axial Ti–O bonds observed in the Raman spectra

The effect of transition metal substitution in the perovskite-type oxides on the physicochemical properties and the catalytic performance in diesel soot oxidation

The paper is focused on the Fe for Co substitution effect on the redox and catalytic properties in the perovskite structure of GdFeO3. The solid oxides with the composition GdFe1xCoxO3 (x = 0; 0.2; 0.5; 0.8; 1) were obtained by the sol-gel method and characterized by various methods: Xray diffraction (XRD), temperature-programmed reduction (H2-TPR), N2 sorption, temperatureprogrammed desorption of oxygen (TPD-O2), simultaneous thermal analysis (STA), and X-ray photoelectron spectroscopy (XPS). The H2-TPR results showed that an increase in the cobalt content in the GdFe1xCoxO3 (x = 0; 0.2; 0.5; 0.8; 1) leads to a decrease in the reduction temperature. Using the TPD-O2 and STA methods, the lattice oxygen mobility is increasing in the course of the substitution of Fe for Co. Thus, the Fe substitution in the perovskite leads to an improvement in the oxygen reaction ability. Experiments on the soot oxidation reveal that catalytic oxidation ability increases in the series: GdFe0.5Co0.5O3 < GdFe0.2Co0.8O3 < GdCoO3, which is in good correlation with the increasing oxygen mobility according to H2-TPR, TPD-O2, and STA results. The soot oxidation over GdFeO3 and GdFe0.8Co0.2O3 is not in this range due to the impurities of iron oxides and higher specific surface area

Synthesis and Characterization of Inorganic-Organic Derivatives of Layered Perovskite-like Niobate HSr₂Nb₃O₁₀ with <i>n</i>-Amines and <i>n</i>-Alcohols

A protonated and hydrated Dion-Jacobson-phase HSr2Nb3O10∙yH2O was used to prepare two series of inorganic–organic derivatives containing non-covalently intercalated n-alkylamines and covalently grafted n-alkoxy groups of different lengths, as they are promising hybrid materials for photocatalytic applications. Preparation of the derivatives was carried out both under the conditions of standard laboratory synthesis and by solvothermal methods. For all the hybrid compounds synthesized structure, quantitative composition, a type of bonding between inorganic and organic parts as well as light absorption range were discussed using powder XRD, Raman, IR and NMR spectroscopy, TG, elemental CHN analysis, and DRS. It was shown that the inorganic–organic samples obtained contain approximately one interlayer organic molecule or group per proton of the initial niobate, as well as some amount of intercalated water. In addition, the thermal stability of the hybrid compounds strongly depends on the nature of the organic component anchoring to the niobate matrix. Although non-covalent amine derivatives are stable only at low temperatures, covalent alkoxy ones can withstand heat up to 250 °C without perceptible decomposition. The fundamental absorption edge of both the initial niobate and the products of its organic modification lies in the near-ultraviolet region (370–385 nm)

Photocatalytic Hydrogen Generation from Aqueous Methanol Solution over n-Butylamine-Intercalated Layered Titanate H2La2Ti3O10: Activity and Stability of the Hybrid Photocatalyst

The stability of platinized n-butylamine-intercalated layered titanate H2La2Ti3O10 during the process of photocatalytic hydrogen production from aqueous methanol under UV irradiation has been thoroughly investigated by means of XRD, CHN, TG, 13C NMR, BET, SEM and GC-MS analysis. It was revealed that n-butylamine completely abandons the interlayer space and transforms into n-butyraldehyde within 3 h of the reaction, while the particle morphology and specific surface area of the photocatalyst are preserved. The resulting solid phase contains carbon in at least two different oxidation states, which are attributed to the intermediate products of methanol oxidation bound to the perovskite matrix. The activity of the photocatalyst formed in this way is stable in time and strongly depends on the medium pH, which is not typical of either the parent H2La2Ti3O10 or TiO2. An approximate linear equation &phi; &asymp; 29&minus;2&#8729;pH holds for the apparent quantum efficiency of hydrogen production in the 220&ndash;340 nm range at 1 mol. % methanol concentration. In the acidic medium, the photocatalyst under study outperforms the platinized H2La2Ti3O10 by more than one order of magnitude. The variation in methanol concentration allowed a maximum quantum efficiency of hydrogen production of 44% at 10 mol. % to be reached

Photocatalytic Hydrogen Generation from Aqueous Methanol Solution over <i>n</i>-Butylamine-Intercalated Layered Titanate H₂La₂Ti₃O₁₀: Activity and Stability of the Hybrid Photocatalyst

The stability of platinized n-butylamine-intercalated layered titanate H2La2Ti3O10 during the process of photocatalytic hydrogen production from aqueous methanol under UV irradiation has been thoroughly investigated by means of XRD, CHN, TG, 13C NMR, BET, SEM and GC-MS analysis. It was revealed that n-butylamine completely abandons the interlayer space and transforms into n-butyraldehyde within 3 h of the reaction, while the particle morphology and specific surface area of the photocatalyst are preserved. The resulting solid phase contains carbon in at least two different oxidation states, which are attributed to the intermediate products of methanol oxidation bound to the perovskite matrix. The activity of the photocatalyst formed in this way is stable in time and strongly depends on the medium pH, which is not typical of either the parent H2La2Ti3O10 or TiO2. An approximate linear equation φ ≈ 29−2∙pH holds for the apparent quantum efficiency of hydrogen production in the 220–340 nm range at 1 mol. % methanol concentration. In the acidic medium, the photocatalyst under study outperforms the platinized H2La2Ti3O10 by more than one order of magnitude. The variation in methanol concentration allowed a maximum quantum efficiency of hydrogen production of 44% at 10 mol. % to be reached

Physical–Chemical Exfoliation of n-Alkylamine Derivatives of Layered Perovskite-like Oxide H2K0.5Bi2.5Ti4O13 into Nanosheets

In the present work, we report the results on exfoliation and coating formation of inorganic–organic hybrids based on the layered perovskite-like bismuth titanate H2K0.5Bi2.5Ti4O13·H2O that could be prepared by a simple ion exchange reaction from a Ruddlesden–Popper phase K2.5Bi2.5Ti4O13. The inorganic–organic hybrids were synthesized by intercalation reactions. Exfoliation into nanosheets was performed for the starting hydrated protonated titanate and for the derivatives intercalated by n-alkylamines to study the influence of preliminary intercalation on exfoliation efficiency. The selected precursors were exfoliated in aqueous solutions of tetrabutylammonium hydroxide using facile stirring and ultrasonication. The suspensions of nanosheets obtained were characterized using UV–vis spectrophotometry, dynamic light scattering, inductively coupled plasma spectroscopy, and gravimetry. Nanosheets were coated on preliminarily polyethyleneimine-covered Si substrates using a self-assembly procedure and studied using atomic force and scanning electron microscopy