581 research outputs found

    Standardisation of Parameters during Endovenous Laser Therapy of Truncal Varicose Veins - Experimental Ex-vivo Study

    Get PDF
    BackgroundVein shrinkage is a surrogate marker for successful laser treatment of varicose veins. However, many controversies still remain concerning the best laser parameters to use. The aim of this study was standardisation of intraoperative energy dosages and pull-back rates to achieve optimal clinical results.DesignEx-vivo study in surgically removed saphenous trunks.Material and methodsGreat saphenous veins were removed by Babcock stripping and irradiated with laser energy delivered by a laser diode emitting at 980nm. In total, 279 vein segments (5cm long) were treated using powers from 5–15W. Vein segments were opened longitudinally and the circumference measured in the treated and untreated regions to assess thermal shrinkage.ResultsThe greatest shrinkage and minimum number of perforations was achieved using lower or medium power (8 to 12W) with longer exposure to administer laser energy. The median percentage vein shrinkage was 50% (power 5W), 45% (8W), 40% (10W), 45% (12W) and 59% (15W). When a higher power was used (15W), the perforations were more frequent and carbonisation was marked.ConclusionsOur data suggests that similar efficacy with fewer vein perforations may be obtained with low or medium power settings and increased exposure when undertaking laser obliteration of saphenous trunks. This may result in fewer adverse events such as ecchymosis following treatment in patients

    The transition between hole-pairs and four-hole clusters in four-leg tJ ladders

    Full text link
    Holes weakly doped into a four-leg \tj ladder bind in pairs. At dopings exceeding a critical doping of δc1/8\delta_c\simeq {1/8} four hole clusters are observed to form in DMRG calculations. The symmetry of the ground state wavefunction does not change and we are able to reproduce this behavior qualitatively with an effective bosonic model in which the four-leg ladder is represented as two coupled two-leg ladders and hole-pairs are mapped on hard core bosons moving along and between these ladders. At lower dopings, δ<δc\delta<\delta_c, a one dimensional bosonic representation for hole-pairs works and allows us to calculate accurately the Luttinger liquid parameter \krho, which takes the universal value \krho=1 as half-filling is approached

    Acute Stroke Treatment in an Anticoagulated Patient: When Is Thrombolysis an Option?

    Get PDF
    Purpose of Review: Direct oral anticoagulants (DOACs: the factor Xa inhibitors rivaroxaban, apixaban, and edoxaban and the direct thrombin inhibitor dabigatran) are the mainstay of stroke prevention in patients with non-valvular atrial fibrillation (AF). Nevertheless, there is a residual stroke risk of 1–2% per year despite DOAC therapy. Intravenous thrombolysis (IVT) reduces morbidity in patients with ischemic stroke and improves functional outcome. Prior DOAC therapy is a (relative) contraindication for IVT but emerging evidence supports its use in selected patients. // Recent Findings: Recent observational studies highlighted that IVT in patients on prior DOAC therapy seems feasible and did not yield major safety issues. Different selection criteria and approaches have been studied including selection by DOAC plasma levels, non-specific coagulation assays, time since last intake, and prior reversal agent use. The optimal selection process is however not clear and most studies comprised few patients. // Summary: IVT in patients taking DOAC is a clinically challenging scenario. Several approaches have been proposed without major safety issues but current evidence is weak. A patient-oriented approach balancing potential benefits of IVT (i.e., amount of salvageable penumbra) against expected bleeding risk including appropriate monitoring of anticoagulant activity seem justified

    Charge density correlations in t-J ladders investigated by the CORE method

    Full text link
    Using 4-site plaquette or rung basis decomposition, the CORE method is applied to 2-leg and 4-leg t-J ladders and cylinders. Resulting range-2 effective hamiltonians are studied numerically on periodic rings taking full advantage of the translation symmetry as well as the drastic reduction of the Hilbert space. We investigate the role of magnetic and fermionic degrees of freedom to obtain the most reliable representation of the underlying model. Spin gaps, pair binding energies and charge correlations are computed and compared to available ED and DMRG data for the full Hamiltonian. Strong evidences for short-range diagonal stripe correlations are found in periodic 4-leg t-J ladders.Comment: Computation of Luttinger liquid parameters (charge velocity and charge correlation exponent) adde

    Source localisation on aircraft in flight - new measurements with the DLR research aircraft Airbus 320 ATRA

    Get PDF
    Fly-over measurements with a large microphone array were performed with the Airbus A320-232 research aircraft ATRA of DLR. A large multi-arm spiral array was set up on the end of the runway of the airport. The aircraft trajectory was estimated from the vertical distance and time delays measured with an array of vertically mounted laser distance meters and GNSS trajectories recorded on board of the aircraft. Source localisation maps were obtained from a hybrid deconvolution method. The source powers in different regions of the aircraft were calculated by integrating over the source regions. The total power in the whole interrogation area matches the power in the far-field spectra, apart from contributions from sources on the ground plane which are reduced by focusing the array on the aircraft. Results from fly-overs in the same or in different configurations can be compared on the basis of the integration results and the individual sources can be ranked according to their contribution to the overall sound pressure

    Superconductivity and antiferromagnetism in a hard-core boson spin-1 model in two dimensions

    Full text link
    A model of hard-core bosons and spin-1 sites with single-ion anisotropy is proposed to approximately describe hole pairs moving in a background of singlets and triplets with the aim of exploring the relationship between superconductivity and antiferromagnetism. The properties of this model at zero temperature were investigated using quantum Monte Carlo techniques. The most important feature found is the suppression of superconductivity, as long range coherence of preformed pairs, due to the presence of both antiferromagnetism and Sz=±1S^z=\pm 1 excitations. Indications of charge ordered and other phases are also discussed.Comment: One figure, one reference, adde

    A Bosonic Model of Hole Pairs

    Full text link
    We numerically investigate a bosonic representation for hole pairs on a two-leg t-J ladder where hard core bosons on a chain represent the hole pairs on the ladder. The interaction between hole pairs is obtained by fitting the density profile obtained with the effective model to the one obtained with the \tj model, taking into account the inner structure of the hole pair given by the hole-hole correlation function. For these interactions we calculate the Luttinger liquid parameter, which takes the universal value Kρ=1K_{\rho}=1 as half filling is approached, for values of the rung exchange JJ' between strong coupling and the isotropic case. The long distance behavior of the hole-hole correlation function is also investigated. Starting from large JJ', the correlation length first increases as expected, but diminishes significantly as JJ' is reduced and bound holes sit mainly on adjacent rungs. As the isotropic case is approached, the correlation length increases again. This effect is related to the different kind of bonds in the region between the two holes of a hole pair when they move apart.Comment: 11 page

    Site specific and localized structural displacements in open structured multimetallic oxides

    No full text
    The structures of solids can locally differ from the macroscopic picture obtained by structural averaging techniques. This difference significantly influences the performance of any functional material. Measurements of these local structures are challenging. Thus, the description of defects is often disregarded. However, in order to understand the functionality, such irregularities have to be investigated. Here, we present a high resolution scanning transmission electron microscopic (STEM) study revealing local structural irregularities in open structured oxides using catalytically active orthorhombic (Mo,V,Te,Nb)Ox as a complex example. Detailed analysis of annular dark field- and annular bright field-STEM images reveal site specific local structural displacements of individual framework and channel sites in the picometer range. These experimental observables can be considered as an important structural addendum for theoretical modelling and should be implemented into the existing data in order to quantify site specific potential energies and stresses. This information can further be used to describe the impact of the structure on the catalytic performance in greater detail

    Friedel Oscillations and Charge Density Waves in Chains and Ladders

    Full text link
    The density matrix renormalization group method for ladders works much more efficiently with open boundary conditions. One consequence of these boundary conditions is groundstate charge density oscillations that often appear to be nearly constant in magnitude or to decay only slightly away from the boundaries. We analyse these using bosonization techniques, relating their detailed form to the correlation exponent and distinguishing boundary induced generalized Friedel oscillations from true charge density waves. We also discuss a different approach to extracting the correlation exponent from the finite size spectrum which uses exclusively open boundary conditions and can therefore take advantage of data for much larger system sizes. A general discussion of the Friedel oscillation wave-vectors is given, and a convenient Fourier transform technique is used to determine it. DMRG results are analysed on Hubbard and t-J chains and 2 leg t-J ladders. We present evidence for the existence of a long-ranged charge density wave state in the t-J ladder at a filling of n=0.75 and near J/t \approx 0.25.Comment: Revtex, 15 pages, 15 postscript figure
    corecore