Curcumin-loaded sterically stabilized nanodispersion based on non-ionic colloidal system induced by ultrasound and solvent diffusion-evaporation

Curcumin has been found to possess significant pharmaceutical activities. However, owing to its low bioavailability, there is a limitation of employing it towards clinical application. In an attempt to surmount this implication, often the choice is designing novel drug delivery systems. Herein, sterically stabilized nanoscale dispersion loaded with curcumin (nanodispersion) based on non-ionic colloidal system has been proposed. In this study, the process conditions were effectively optimized using response surface methodology (RSM) with Box–Behnken design (BBD). The suggested optimum formulation proved to be an excellent fit to the actual experimental output. STEM images illustrate that the optimal curcumin-loaded nanodispersion has spherical morphology with narrow particle size distribution. Particle size distribution study confirms that the solution pH does not affect the nanodispersion, and physical stability study shows that the colloidal system is stable over 90 days of storage at ambient conditions. More importantly, controlled release profile was achieved over 72 h and the in vitro drug release data fit well to Higuchi model (R2=0.9654)

Size-selective purification of hepatitis B virus-like particle in flow-through chromatography: types of ion exchange adsorbent and grafted polymer architecture

Hepatitis B virus-like particles expressed in Escherichia coli were purified using anion exchange adsorbents grafted with polymer poly(oligo(ethylene glycol) methacrylate) in flow-through chromatography mode. The virus-like particles were selectively excluded, while the relatively smaller sized host cell proteins were absorbed. The exclusion of virus-like particles was governed by the accessibility of binding sites (the size of adsorbents and the charge of grafted dextran chains) as well as the architecture (branch-chain length) of the grafted polymer. The branch-chain length of grafted polymer was altered by changing the type of monomers used. The larger adsorbent (90 μm) had an approximately twofold increase in the flow-through recovery, as compared to the smaller adsorbent (30 μm). Generally, polymer-grafted adsorbents improved the exclusion of the virus-like particles. Overall, the middle branch-chain length polymer grafted on larger adsorbent showed optimal performance at 92% flow-through recovery with a purification factor of 1.53. A comparative study between the adsorbent with dextran grafts and the polymer-grafted adsorbent showed that a better exclusion of virus-like particles was achieved with the absorbent grafted with inert polymer. The grafted polymer was also shown to reduce strong interaction between binding sites and virus-like particles, which preserved the particles' structure

Recent developments in nanocellulose-reinforced rubber matrix composites:A review

Research and development of nanocellulose and nanocellulose-reinforced composite materials have garnered substantial interest in recent years. This is greatly attributed to its unique functionalities and properties, such as being renewable, sustainable, possessing high mechanical strengths, having low weight and cost. This review aims to highlight recent developments in incorporating nanocellulose into rubber matrices as a reinforcing filler material. It encompasses an introduction to natural and synthetic rubbers as a commodity at large and conventional fillers used today in rubber processing, such as carbon black and silica. Subsequently, different types of nanocellulose would be addressed, including its common sources, dimensions, and mechanical properties, followed by recent isolation techniques of nanocellulose from its resource and application in rubber reinforcement. The review also gathers recent studies and qualitative findings on the incorporation of a myriad of nanocellulose variants into various types of rubber matrices with the main goal of enhancing its mechanical integrity and potentially phasing out conventional rubber fillers. The mechanism of reinforcement and mechanical behaviors of these nanocomposites are highlighted. This article concludes with potential industrial applications of nanocellulose-reinforced rubber composites and the way forward with this technology

Assessing the suitability of self-healing rubber glove for safe handling of pesticides

Rubber gloves used for protection against chemicals or hazards are generally prone to tearing or leaking after repeated use, exposing the worker to potentially hazardous agents. Self-healing technology promises increased product durability and shelf life appears to be a feasible solution to address these issues. Herein, we aimed to fabricate a novel epoxidized natural rubber-based self-healable glove (SH glove) and investigate its suitability for handling pesticides safely. In this study, breakthrough time analysis and surface morphological observation were performed to determine the SH glove’s ability to withstand dangerous chemicals. The chemical resistance performance of the fabricated SH glove was compared against four different types of commercial gloves at different temperatures. Using malathion as a model pesticide, the results showed that the SH glove presented chemical resistance ability comparable to those gloves made with nitrile and NR latex at room temperature and 37 °C. The self-healing test revealed that the SH glove could be self-healed and retained its chemical resistance ability close to its pre-cut value. Our findings suggested that the developed SH glove with proven chemical resistance capability could be a new suitable safety glove for effectively handling pesticides and reducing glove waste generation

The development of novel Ganoderic-Acid-Encapsulated Nanodispersions using the combination of ultrasonic cavitation and solvent evaporation through response surface optimization

Ganoderic Acid (GA), a major bioactive compound isolated from the East Asian medicinal mushroom Ganoderma tsugae, is traditionally believed to have significant medicinal properties. GA is poorly soluble in water, which poses several challenges in terms of its formulation. In this study, Ganoderma tsugae extracts obtained through ethanol extraction were encapsulated in nanodispersions via ultrasonic cavitation and solvent evaporation to increase their bioavailability. The preparation route was thoroughly analyzed using Response Surface Methodology (RSM) to determine the interactions between the variables. Based on the results, the Hydrophilic–Lipophilic Balance (HLB) and the evaporation temperature significantly influenced the resulting particle size. In the optimized nanodispersions, GA was incorporated into a hydrophobic core with a particle size no greater than 200 nm and a very narrow particle distribution (namely, a polydispersity index of 0.289). Due to the high negative zeta potential (−45.9 mV), a very slow particle growth rate of 0.239% over short-term storage (14 days) was achieved. In addition, the zeta average remained virtually unchanged for 14 days at room temperature in solutions at different pH levels. In summary, this paper provides the first-ever demonstration that ultrasound cavitation in conjunction with solvent evaporation can be used to generate GA nanodispersions.</p

In vitro digestion and swelling kinetics of thymoquinone-loaded pickering emulsions incorporated in alginate-chitosan hydrogel beads

The present work aimed to investigate the swelling behavior, in vitro digestion, and release of a hydrophobic bioactive compound, thymoquinone (TQ), loaded in Pickering emulsion incorporated in alginate-chitosan hydrogel beads using a simulated gastrointestinal model. In this study, oil-in-water Pickering emulsions of uniform micron droplet sizes were formulated using 20% red palm olein and 0.5% (w/v) cellulose nanocrystals-soy protein isolate (CNC/SPI) complex followed by encapsulation within beads. FT-IR was used to characterize the bonding between the alginate, chitosan, and Pickering emulsion. 2% (w/v) alginate-1% (w/v) chitosan hydrogel beads were found to be spherical with higher stability against structural deformation. The alginate-chitosan beads displayed excellent stability in simulated gastric fluid (SGF) with a low water uptake of ~19%. The hydrogel beads demonstrated a high swelling degree (85%) with a superior water uptake capacity of ~593% during intestinal digestion in simulated intestinal fluid (SIF). After exposure to SIF, the microstructure transformation was observed, causing erosion and degradation of alginate/chitosan wall materials. The release profile of TQ up to 83% was achieved in intestinal digestion, and the release behavior was dominated by diffusion via the bead swelling process. These results provided useful insight into the design of food-grade colloidal delivery systems using protein-polysaccharide complex-stabilized Pickering emulsions incorporated in alginate-chitosan hydrogel beads

Ultrasonic cavitation:an effective cleaner and greener intensification technology in the extraction and surface modification of nanocellulose

With rising consumer demand for natural products, a greener and cleaner technology, i.e., ultrasound-assisted extraction, has received immense attention given its effective and rapid isolation for nanocellulose compared to conventional methods. Nevertheless, the application of ultrasound on a commercial scale is limited due to the challenges associated with process optimization, high energy requirement, difficulty in equipment design and process scale-up, safety and regulatory issues. This review aims to narrow the research gap by placing the current research activities into perspectives and highlighting the diversified applications, significant roles, and potentials of ultrasound to ease future developments. In recent years, enhancements have been reported with ultrasound assistance, including a reduction in extraction duration, minimization of the reliance on harmful chemicals, and, most importantly, improved yield and properties of nanocellulose. An extensive review of the strengths and weaknesses of ultrasound-assisted treatments has also been considered. Essentially, the cavitation phenomena enhance the extraction efficiency through an increased mass transfer rate between the substrate and solvent due to the implosion of microbubbles. Optimization of process parameters such as ultrasonic intensity, duration, and frequency have indicated their significance for improved efficiency