Investigation of pilot-scale 8040 FO membrane module under different operating conditions for brackish water desalination

© 2014, © 2014 Balaban Desalination Publications. All rights reserved. Two spiral wound forward osmosis membrane modules with different spacer designs (corrugated spacer [CS] and medium spacer [MS]) were investigated for the fertilizer-drawn forward osmosis (FO) desalination of brackish groundwater (BGW) at a pilot-scale level. This study mainly focused on examining the influence of various operating conditions such as feed flow rate, total dissolved solids (TDS) concentration of the BGW feed, and draw solution (DS) concentrations using ammonium sulfate ((NH4)2SO4, SOA) on the performance of two membrane modules. The feed flow rate played a positive role in the average water flux of the pilot-scale FO membrane module due to enhanced mass transfer coefficient across the membrane surface. Feed TDS and DS concentrations also played a significant role in both FO membrane modules because they are directly related to the osmotic driving force and membrane fouling tendency. CS module performed slightly better than MS module during all experiments due to probably enhanced mass transfer and lower fouling propensity associated with the CS. Besides, CS spacer provides larger channel space that can accommodate larger volumes of DS, and hence, could maintain higher DS concentration. However, the extent of dilution for the CS module is slightly lower

Hybrid desalination processes for beneficial use of reverse osmosis brine: Current status and future prospects

© 2018 Elsevier B.V. As water shortage has increasingly become a serious global problem, desalination using seawater reverse osmosis (SWRO) is considered as a sustainable source of potable water sources. However, a major issue on the SWRO desalination plant is the generation of brine that has potential adverse impact due to its high salt concentration. Accordingly, it is necessary to develop technologies that allow environmentally friendly and economically viable management of SWRO brines. This paper gives an overview of recent research works and technologies to treat SWRO brines for its beneficial use. The treatment processes have been classified into two different groups according to their final purpose: 1) technologies for producing fresh water and 2) technologies for recovering energy. Topics in this paper includes membrane distillation (MD), forward osmosis (FO), pressure-retarded osmosis (PRO), reverse electrodialysis (RED) as emerging tools for beneficial use of SWRO brine. In addition, a new approach to simultaneously recover water and energy from SWRO brine is introduced as a case study to provide insight into improving the sustainability of seawater desalination

Practical considerations for operability of an 8″ spiral wound forward osmosis module: Hydrodynamics, fouling behaviour and cleaning strategy

© 2016 Elsevier B.V. A better understanding of large spiral wound forward osmosis (SW FO) module operation is needed to provide practical insight for a full-scale FO practical implementation desalination plant. Therefore, this study investigated two different 8″ SW FO modules (i.e. cellulose tri acetate, CTA and thin film composite, TFC) in terms of hydrodynamics, operating pressure, water and solute fluxes, fouling behaviour and cleaning strategy. For both modules, a significantly lower flow rate was required in the draw channel than in the feed channel due to important pressure-drop in the draw channel and was a particularly critical operating challenge in the CTA module when permeate spacers are used. Under FO and pressure assisted osmosis (PAO, up to 2.5 bar) operations, the TFC module featured higher water flux and lower reverse salt flux than the CTA module. For both modules, fouling tests demonstrated that feed inlet pressure was more sensitive to foulant deposition than the flux, thus confirming that FO fouling deposition occurs in the feed channel rather than on the membrane surface. Osmotic backwash combined with physical cleaning used in this study confirmed to be effective and adapted to large-scale FO module operation

Synthesis and NOx removal performance of anatase S-TiO2/g-CN heterojunction formed from dye wastewater sludge.

In this study, sludges generated from Ti-based flocculation of dye wastewater were used to retrieve photoactive titania (S-TiO2). It was heterojunctioned with graphitic carbon nitride (g-CN) to augment photoactivity under UV/visible light irradiance. Later the as-prepared samples were utilized to remove nitrogen oxides (NOx) in the atmospheric condition through photocatalysis. Heterojunction between S-TiO2 and g-CN was prepared through facile calcination (@550 °C) of S-TiO2 and melamine mix. Advanced sample characterization was carried out and documented extensively. Successful heterojunction was confirmed from the assessment of morphological and optical attributes of the samples. Finally, the prepared samples' level of photoactivity was assessed through photooxidation of NOx under both UV and visible light irradiance. Enhanced photoactivity was observed in the prepared samples irrespective of the light types. After 1 h of UV/visible light-based photooxidation, the best sample STC4 was found to remove 15.18% and 9.16% of atmospheric NO, respectively. In STC4, the mixing ratio of S-TiO2, to melamine was maintained as 1:3. Moreover, the optical bandgap of STC4 was found as 2.65 eV, where for S-TiO2, it was 2.83 eV. Hence, the restrained rate of photogenerated charge recombination and tailored energy bandgap of the as-prepared samples were the primary factors for enhancing photoactivity

Electric Conductivity of the Zero-gap Semiconducting State in Alpha-(BEDT-TTF)2I3 Salt

The electric conductivity which reveals the zero gap semiconducting (ZGS) state has been investigated as the function of temperature $T$ and life time $\tau$ in order to understand the ZGS state in quarter-filled $\alpha$-(BEDT-TTF)$_2$I$_3$ salt with four sites in the unit cell. By treating $\tau$ as a parameter and making use of the one-loop approximation, it is found that the conductivity is proportional to $T$ and $\tau$ for $k_B\gg\hbar/\tau$ and independent of $T$ and $\tau$ for $k_B T\ll\hbar/\tau$. Further the conductivity being independent of $T$ in the ZGS state is examined in terms of Born approximation for the impurity cattering.Comment: 5 pages, 4 figures, submitted to J. Phys. Soc. Jp

Preparation and characterisation of titanium dioxide produced from Ti-salt flocculated sludge in water treatment

During the past few years, titanium salts were investigated as alternative coagulants for the removal of organic matter of different molecular sizes in contaminated water. The flocculation efficiency of Ti-salt was comparable to those of FeCl3 and Al2(SO4)3 salts, commonly used coagulants. Incinerated sludge-TiO2 showed higher surface area and photocatalytic activity than commercially available TiO2. Metal-doped forms were produced by adding coagulant aids such as iron (Fe-), aluminium (Al-) and (Ca-) calcium salts during Ti-salt flocculation to increase pH. Ca- and Al- doped TiO2 showed very high photocatalytic activity compared to Fe-doped TiO2. When tested in a pilot scale plant for treatment of dye wastewater to check practical feasibility of the novel process, the removal ratio of the chemical oxygen demand was comparable to those of commonly used coagulants but the settling of sludge was faster. The TiO2 generated after sludge incineration showed a high photocatalytic activity for degradation of volatile organic compounds and increased the rate of hydrogen production by water photosplitting. TiCl4 coagulant and TiO2 produced from different water sources with different concentrations had low acute toxicity compared to heavy metals and commercial TiO2 when examined based on D. Magna mortality. This paper presents the production, characterisation and the photoactivity of TiO2 produced from Ti-salt flocculated sludge. Different case studies are discussed to highlighted recent advances in this field

Performance of a novel baffled osmotic membrane bioreactor-microfiltration hybrid system under continuous operation for simultaneous nutrient removal and mitigation of brine discharge

© 2017 Elsevier Ltd The present study investigated the performance of an integrated osmotic and microfiltration membrane bioreactor system for wastewater treatment employing baffles in the reactor. Thus, this reactor design enables both aerobic and anoxic processes in an attempt to reduce the process footprint and energy costs associated with continuous aeration. The process performance was evaluated in terms of water flux, salinity build up in the bioreactor, organic and nutrient removal and microbial activity using synthetic reverse osmosis (RO) brine as draw solution (DS). The incorporation of MF membrane was effective in maintaining a reasonable salinity level (612–1434 mg/L) in the reactor which resulted in a much lower flux decline (i.e. 11.48–6.98 LMH) as compared to previous studies. The stable operation of the osmotic membrane bioreactor–forward osmosis (OMBR-FO) process resulted in an effective removal of both organic matter (97.84%) and nutrient (phosphate 87.36% and total nitrogen 94.28%), respectively

Sizing Up the Impact of Embassies on Exports

The purpose of this study is to test for the effects of trade promotion via the foreign service. We develop a Melitz-based model where firms are heterogeneous with respect to productivity and must pay a beachhead cost to enter a foreign market, which can be reduced by government spending on trade promotion. The model predicts that unilateral trade promotion allows medium-sized firms to export. We test this prediction using Swedish firm-level data and information on the opening and closing of Swedish embassies abroad using Norwegian firms as control group. Our results lend support to the predictions of the model, with large and medium-sized firms responding most strongly to the opening of embassies