Attenuation of Guided Wave Propagation by the Insulation Pipe

Pipeline systems are widely used in gas, refinery, chemical and petro-chemical industries, which usually carry high pressure, high temperature or even highly corrosive fluids. Cracks and corrosion are often found at the outer or inner surface of pipeline and can lead to a serious thinning of wall thickness. Leaks or sudden failures of pipes can cause injuries, fatalities and environmental damage. Ultrasonic nondestructive techniques are available for the detection of wall loss associated with defects in the pipe. Unfortunately, a high proportion in pipelines of these industrial are insulated, so that even external corrosion cannot readily be detected by the conventional ultrasonic testing (single position measurement) without the removal of the insulation, which in most case is time-consuming and cost expensive. Especially in typically industrial plants, there are hundreds of kilometers of pipelines can be in operation. Making inspection of full pipelines is virtually impossible in industrial plants. There is therefore a quick reliable method for the detection of corrosion under insulation (CUI). This technique, called guided wave, employs a pulseecho system applied at a single location of a pipe where only a small section of insulation need to be removed, using waves propagation along the pipe wall. The changes in the response signal indicate the presence of an impedance change in the pipe. The shape and axial location of defects and features in the pipe are also determined by reflected signals and their arrival times. Propagation distance of many tens of meters can readily be obtained in steel pipes [1-6]. Since these guided waves are cylindrical Lamb waves along the pipe, no lateral spreading can occur and the propagation is essentially one-dimensional. In a uniform pipe, their amplitude with propagation distance is therefore only reduced by the material attenuation of the steel [7]

Search for eccentric black hole coalescences during the third observing run of LIGO and Virgo

Despite the growing number of confident binary black hole coalescences observed through gravitational waves so far, the astrophysical origin of these binaries remains uncertain. Orbital eccentricity is one of the clearest tracers of binary formation channels. Identifying binary eccentricity, however, remains challenging due to the limited availability of gravitational waveforms that include effects of eccentricity. Here, we present observational results for a waveform-independent search sensitive to eccentric black hole coalescences, covering the third observing run (O3) of the LIGO and Virgo detectors. We identified no new high-significance candidates beyond those that were already identified with searches focusing on quasi-circular binaries. We determine the sensitivity of our search to high-mass (total mass M>70 M⊙) binaries covering eccentricities up to 0.3 at 15 Hz orbital frequency, and use this to compare model predictions to search results. Assuming all detections are indeed quasi-circular, for our fiducial population model, we place an upper limit for the merger rate density of high-mass binaries with eccentricities 0<e≤0.3 at 0.33 Gpc−3 yr−1 at 90\% confidence level

Ultralight vector dark matter search using data from the KAGRA O3GK run

Among the various candidates for dark matter (DM), ultralight vector DM can be probed by laser interferometric gravitational wave detectors through the measurement of oscillating length changes in the arm cavities. In this context, KAGRA has a unique feature due to differing compositions of its mirrors, enhancing the signal of vector DM in the length change in the auxiliary channels. Here we present the result of a search for U(1)B−L gauge boson DM using the KAGRA data from auxiliary length channels during the first joint observation run together with GEO600. By applying our search pipeline, which takes into account the stochastic nature of ultralight DM, upper bounds on the coupling strength between the U(1)B−L gauge boson and ordinary matter are obtained for a range of DM masses. While our constraints are less stringent than those derived from previous experiments, this study demonstrates the applicability of our method to the lower-mass vector DM search, which is made difficult in this measurement by the short observation time compared to the auto-correlation time scale of DM

Enhancing Algal Growth by Stimulation with LED Lighting and Ultrasound

Algae are not only rich in natural nutrients, but are also a high-priced health food. An important constituent called “growth factor” is extracted from algae and used as an ingredient in medical drugs, foods, cosmetics, and other products. Its enormous potential market should not be taken lightly. Algae are mostly found near coastal areas and their habitats are limited by a number of natural factors, leading to large labor and financial expenditures to harvest. This report describes our study of indoor algae production using LED lights and ultrasound and manipulating other growth factors at different temperatures. Ultrasound treatment at the alga’s natural resonant frequency was varied to determine optimal algal growth using the Taguchi method to plan and to analyze the experiments. The results were very satisfying, showing an 8.23% increase in the growth rate by the fifth day due to ultrasound treatment and an amazing 27.01% growth rate due to biomechanical stimulation

The Experimental Realization of an Acoustic Cloak in Air with a Meta-Composite Shell

Anisotropic cloak shells can be used for the spatial transformation of a space to alter the propagation of acoustic waves by redirecting them along a pre-determined path. This paper outlines the design, fabrication, and experimental analysis of a circular acoustic cloak shell made of meta-composite material for in-air applications. Based on the three-dimensional coordinate transformation, we first designed an anisotropic circle meta-composite cloak shell according to its impedance values. The cloak shell comprises various layered structures with cavities and tubes, respectively, providing acoustic mass and compliance for the provision of anisotropic material properties. Secondly, we conducted numerical and experimental analyses under practice working conditions to demonstrate the efficacy of the acoustic cloak. The structure of the cloak shell, fabricated by three-dimensional printing (3D printing), is experimentally evaluated in a semi-anechoic room with a free-field environment. The simulation and experimental results demonstrate the acoustic cloaking effects in the scattering far field. Besides the scattering field, the sound field measurement results obtained with the region enclosed by the shell also shows the abilities of the cloak shell in altering the direction of wave propagation along a pre-determined path in air