Side-on measurement of hydrodynamics of laser-driven plasmas with high space- and time-resolution x-ray imaging technique

Copyright 2003 American Institute of Physics. This article may be downloaded for personal use only. Any other use requires prior permission of the author and the American Institute of Physics. The following article appeared in Review of Scientific Instruments, 74(3), 2198-2201, 2003 and may be found at http://dx.doi.org/10.1063/1.153785

FIREX project and effects of self-generated electric and magnetic fields on electron-driven fast ignition.

Fast ignition is a new scheme in laser fusion, in which higher energy gain with a smaller laser pulse energy is expected. A cone target has been introduced for realizing higher coupling efficiency. At ILE, Osaka University, a laser with four beams and a total output of 10 kJ ps−1, laser for fast ignition experiment (LFEX), has been constructed and we have carried out an integrated experiment with one beam of the LFEX. Through experiments it was found that the coupling efficiency is degraded when the laser pre-pulse is not sufficiently small. Namely, the main pulse is absorbed in the long-scale pre-plasma produced by the pre-pulse and the hot electron energy is higher than that for a clean pulse. Furthermore, the distance between the hot electron source and the core plasma is large. Hence, we are exploring how to overcome the pre-pulse effects on the cone target. In this paper it is proposed that a thin foil covers the laser entrance of the cone to mitigate the pre-plasma and a double cone reduces the loss of high-energy electrons from the side wall of the cone. The simulations indicate that a higher coupling efficiency is expected for the double cone target with a thin foil at the laser entrance. Namely, the pre-pulse will be absorbed by the foil and the electromagnetic fields generated on the surface of the inner cone will confine high-energy electrons

Magnetized Fast Isochoric Laser Heating for Efficient Creation of Ultra-High-Energy-Density States

The quest for the inertial confinement fusion (ICF) ignition is a grand challenge, as exemplified by extraordinary large laser facilities. Fast isochoric heating of a pre-compressed plasma core with a high-intensity short-pulse laser is an attractive and alternative approach to create ultra-high-energy-density states like those found in ICF ignition sparks. This avoids the ignition quench caused by the hot spark mixing with the surrounding cold fuel, which is the crucial problem of the currently pursued ignition scheme. High-intensity lasers efficiently produce relativistic electron beams (REB). A part of the REB kinetic energy is deposited in the core, and then the heated region becomes the hot spark to trigger the ignition. However, only a small portion of the REB collides with the core because of its large divergence. Here we have demonstrated enhanced laser-to-core energy coupling with the magnetized fast isochoric heating. The method employs a kilo-tesla-level magnetic field that is applied to the transport region from the REB generation point to the core which results in guiding the REB along the magnetic field lines to the core. 7.7 $\pm$ 1.3 % of the maximum coupling was achieved even with a relatively small radial area density core ($\rho R$ $\sim$ 0.1 g/cm$^2$). The guided REB transport was clearly visualized in a pre-compressed core by using Cu-$K_\alpha$ imaging technique. A simplified model coupled with the comprehensive diagnostics yields 6.2\% of the coupling that agrees fairly with the measured coupling. This model also reveals that an ignition-scale areal density core ($\rho R$ $\sim$ 0.4 g/cm$^2$) leads to much higher laser-to-core coupling ($>$ 15%), this is much higher than that achieved by the current scheme

Cryogenic deuterium target experiments with the GEKKO XII, green laser system

Copyright 1995 American Institute of Physics. This article may be downloaded for personal use only. Any other use requires prior permission of the author and the American Institute of Physics. The following article appeared in Physics of Plasmas, 2(6), 2495-2503, 1995 and may be found at http://dx.doi.org/10.1063/1.87121

Fabrication of high-concentration Cu-doped deuterated targets for fast ignition experiments

In high-energy-density physics, including inertial fusion energy using high-power lasers, doping tracer atoms and deuteration of target materials play an important role in diagnosis. For example, a low-concentration Cu dopant acts as an x-ray source for electron temperature detection while a deuterium dopant acts as a neutron source for fusion reaction detection. However, the simultaneous achievement of Cu doping, a deuterated polymer, mechanical toughness and chemical robustness during the fabrication process is not so simple. In this study, we report the successful fabrication of a Cu-doped deuterated target. The obtained samples were characterized by inductively coupled plasma optical emission spectrometry, differential scanning calorimetry and Fourier transform infrared spectroscopy. Simultaneous measurements of Cu K-shell x-ray emission and beam fusion neutrons were demonstrated using a petawatt laser at Osaka University.Ikeda T., Kaneyasu Y., Hosokawa H., et al. Fabrication of high-concentration Cu-doped deuterated targets for fast ignition experiments. Nuclear Fusion 63, 016010 (2023); https://doi.org/10.1088/1741-4326/aca2ba

Demonstration of a spherical plasma mirror for the counter-propagating kilojoule-class petawatt LFEX laser system

A counter-propagating laser-beam platform using a spherical plasma mirror was developed for the kilojoule-class petawatt LFEX laser. The temporal and spatial overlaps of the incoming and redirected beams were measured with an optical interferometer and an x-ray pinhole camera. The plasma mirror performance was evaluated by measuring fast electrons, ions, and neutrons generated in the counter-propagating laser interaction with a Cu-doped deuterated film on both sides. The reflectivity and peak intensity were estimated as ∼50% and ∼5 × 1018 W/cm2, respectively. The platform could enable studies of counter-streaming charged particles in high-energy-density plasmas for fundamental and inertial confinement fusion research.Kojima S., Abe Y., Miura E., et al. Demonstration of a spherical plasma mirror for the counter-propagating kilojoule-class petawatt LFEX laser system. Optics Express 30, 43491 (2022); https://doi.org/10.1364/oe.475945

Hot Electron Spectra in Plain, Cone and Integrated Targets for FIREX-I using Electron Spectrometer

The traditional fast ignition scheme is that a compressed core created by an imploding laser is auxiliary heated and ignited by the hot electrons (produced by a short pulse laser guided through the cone). Here, the most suitable target design for fast ignition can be searched for by comparison of the spectra between varied targets using an electron spectrometer