High performance millimeter-wave microstrip circulators and isolators

Millimeter wave systems, phased array antennas, and high performance components all require wideband circulators (and isolators) to perform diplexing and switching, to improve isolation and Voltage Standing Wave Ratio (VSWR), and to construct IMPATT diode reflection amplifiers. Presently, most of the millimeter-wave circulators and isolators are available in the configurations of waveguide or stripline, both of which suffer from the shortcomings of bulky size/weight, narrow bandwidth, and poor compatibility with monolithic millimeter-wave integrated circuits (MMIC). MMW microstrip circulators/isolators can eliminate or improve these shortcomings. Stub-tuned microstrip circulator configuration were developed utilizing the electromagnetic fields perturbation technique, the adhesion problems of microstrip metallization on new ferrite substrate were overcome, the fabrication, assembly, packaging techniques were improved, and then successfully designed, fabricated a Ka band circulator which has isolation and return loss of greater than 16dB, insertion loss less than 0.7dB. To assess the steady and reliable performance of the circulator, a temperature cycling test was done over the range of -20 to +50 C for 3 continuous cycles and found no significant impact or variation of circulator performance

Calculations of turbulent separated flows

A numerical study of incompressible turbulent separated flows is carried out by using two-equation turbulence models of the K-epsilon type. On the basis of realizability analysis, a new formulation of the eddy-viscosity is proposed which ensures the positiveness of turbulent normal stresses - a realizability condition that most existing two-equation turbulence models are unable to satisfy. The present model is applied to calculate two backward-facing step flows. Calculations with the standard K-epsilon model and a recently developed RNG-based K-epsilon model are also made for comparison. The calculations are performed with a finite-volume method. A second-order accurate differencing scheme and sufficiently fine grids are used to ensure the numerical accuracy of solutions. The calculated results are compared with the experimental data for both mean and turbulent quantities. The comparison shows that the present model performs quite well for separated flows

Complete gradient-LC-ESI system on a chip for protein analysis

This paper presents the first fully integrated gradient-elution liquid chromatography-electrospray ionization (LC-ESI) system on a chip. This chip integrates a pair of high-pressure gradient pumps, a sample injection pump, a passive mixer, a packed separation column, and an ESI nozzle. We also present the successful on-chip separation of protein digests by reverse phase (RP)-LC coupled with on-line mass spectrometer (MS) analysis

Polar cap observations of thermospheric winds and temperatures at Sondre Stromfjord, Greenland

An agreement of averaged temperatures with mass spectrometer incoherent scatter radar looked reasonable for several nights, but for many nights there are differences: (1) midnight period of cooling, and (2) temperature increases associated with overhead crossings of the auroral belt. The observed rise of the temperature before dawn in conjunction with the high 6300A intensities suggests a connection between the two effects: soft particle precipitation most likely candidate but frictional heating perhaps also a possibility. A comparison with the thermospheric general circulation model calculations also needed. The technique for formulating neutral wind vectors performs well in most cases. The observed patterns show evidence for abatement in the midnight sector in the meridional wind component at the separatix between the two cells with a frequency of the order of 20 to 25%, also observed in radar observations at Sondre Stromfjord. The observed patterns for magnetically quiet conditions show flow characteristic of the auroral belt, westward in evening followed by the midnight surge. The observed patterns for active conditions show dominance either by the evening cell or the morning cell, but most often the former

Toward Full LHC Coverage of Natural Supersymmetry

We argue that combining just a handful of searches for new physics at Run I of the LHC is sufficient to exclude most supersymmetric extensions of the Standard Model in which the gluino is kinematically accessible and the spectrum is natural. Such models typically give rise to significant MET, top quarks and/or high object multiplicity, and we show that having even one of these signatures generally results in stringent limits. We also identify, among models that lack these signatures, the few gaps in coverage remaining, and propose search strategies to close these gaps. Our results are general and independent of the details of the spectrum, assumptions about minimality, R-parity, etc. Our analysis strategy should remain applicable when the LHC moves to higher energy. Central to our argument are ATLAS and CMS searches for many jets and low MET, a proposed lepton + many jets search, an ATLAS search for 6-7 high-pT jets, and a reexamination of the control and signal regions of the CMS black hole search.Comment: 53 pages, 16 figures, journal versio

XASH-3, a novel Xenopus achaete-scute homolog, provides an early marker of planar neural induction and position along the mediolateral axis of the neural plate

We have isolated a novel Xenopus homolog of the Drosophila achaete-scute genes, called XASH-3. XASH-3 expression is neural specific and is detected as early as stage 11 1/2, making it one of the earliest markers of neural induction so far described. Moreover, XASH-3 expression within the neural plate is regionally restricted. Transverse bands of XASH-3 mRNA mark discrete positions along the anteroposterior axis, while longitudinal bands mark a discrete position along the mediolateral axis. This latter site of XASH-3 expression appears to demarcate the prospective sulcus limitans, a boundary zone that later separates the functionally distinct dorsal (alar) and ventral (basal) regions of the spinal cord. In sandwich explants lacking any underlying mesoderm, XASH-3 is expressed in longitudinal stripes located lateral to the midline. This provides the first indication that planar or midline-derived inductive signals are sufficient to establish at least some aspects of positional identity along the mediolateral axis of the neural plate. By contrast, the transverse stripes of XASH-3 expression are not detected, suggesting that this aspect of anteroposterior neural pattern is lost or delayed in the absence of vertically passed signals. The restricted mediolateral expression of XASH-3 suggests that mediolateral patterning of the neural plate is an early event, and that this regionalization can be achieved in the absence of inducing signals derived from underlying mesoderm

GRID3D-v2: An updated version of the GRID2D/3D computer program for generating grid systems in complex-shaped three-dimensional spatial domains

In order to generate good quality systems for complicated three-dimensional spatial domains, the grid-generation method used must be able to exert rather precise controls over grid-point distributions. Several techniques are presented that enhance control of grid-point distribution for a class of algebraic grid-generation methods known as the two-, four-, and six-boundary methods. These techniques include variable stretching functions from bilinear interpolation, interpolating functions based on tension splines, and normalized K-factors. The techniques developed in this study were incorporated into a new version of GRID3D called GRID3D-v2. The usefulness of GRID3D-v2 was demonstrated by using it to generate a three-dimensional grid system in the coolent passage of a radial turbine blade with serpentine channels and pin fins