Parameters of CO2 bands near 3.6 microns

The intensities, widths, and positions of lines of three CO2 bands near 2750/cm were determined. The results are in general agreement with other measured and estimated values

Mean rotor wake characteristics of an aerodynamically loaded 0.5 m diameter fan

Mean rotor wake properties at several downstream distances behind the rotor of a loaded 1.2 pressure ratio fan were measured with a cross film anemometer in an anechoic wind tunnel. Mean wake characteristics in the midspan and near tip region were determined utilizing an ensemble averaging technique. The upwash and streamwise components of the velocity behind the rotor indicate a complex structure superimposed on the major velocity defects at a down stream spacing of 0.5 rotor chords. Spectral analysis indicates high levels of the second and fourth harmonics of the blade passage frequency in the midspan region while the blade passage frequency and its second and third harmonic are predominant in the tip region

Poverty and inequality in Britain: 2006

This Commentary provides an update on trends in poverty and inequality in Great Britain, based on the latest official government statistics. It uses the same approach to measuring incomes and poverty in Great Britain as the government employs in its Households Below Average Income (HBAI) publication

A Theoretical Model for Optimization of SALD Parameters

This paper addresses the need to conduct theoretical work concerning an economical way of Solid Freeform Fabrication rendering by using selective Area Laser Deposition (SALD). The part in SALD rendering process is formed layer by layer that, in turn, is composed of stripes of material produced in the path of a laser. There are three situations in which such a stripe can be rendered: a) alone, b) with one neighbor on one side, and c) with neighbors on both sides. Residual thermal stresses in the part are expected to be affected by how a stripe is rendered. Furthermore, the residual thermal stress and the mechanical property of the part are also dictated by other processing variables such as laser scanning patters, laser input power, scanning speed, scanning spacing, deposition temperature, gas precursor pressure, intrinsic thermal conductivity and mechanical properties of the rendered material. A theoretical approach is proposed to address the minimization of residual thermal stresses and rendering times and the maximization of the strength of the part. It is proposed that such multiple optimizations that are dictated by many decision variables can be solved by minimizing and/or maximizing object functions dePending on the design criteria for each attribute of the rendered partMechanical Engineerin

Automated tester permits precise calibration of pressure transducers from 0 to 1050 psi

Automated portable checker allows last-minute calibration of pressure transducers before testing. It uses a pressure console and equipment that can produce test pressures of 0-1050 psi. The console can be connected to other apparatus for measurement and visual display of the electrical output

The problems of offenders with mental disorders: A plurality of perspectives within a single mental health care organisation

Managers, doctors, nurses, occupational therapists, social workers, psychologists, unqualified staff and service users were interviewed for a qualitative study of risk management and rehabilitation in an inner city medium secure forensic mental health care unit. Different professional orientations to service user problems were identified. Doctors focused primarily on the diagnosis of mental disorder, which they managed mainly through pharmaceutical interventions. Psychologists were principally concerned with personal factors, for example service user insight into their biographical history. Occupational therapists concentrated mainly on daily living skills, and social workers on post-discharge living arrangements. Some front line nurses, held accountable for security lapses, adopted a criminogenic approach. Service users were more likely than professionals to understand their needs in terms of their wider life circumstances. These differences are explored qualitatively in relation to four models of crossdisciplinary relationships: monoprofessional self-organisation combined with restricted communication; hermeneutic reaching out to other perspectives; the establishment of interdisciplinary sub-systems; and transdisciplinary merger. Relationships between professions working in this unit, as portrayed in qualitative interviews, corresponded mainly to the first model of monoprofessional self-organisation. Reasons for restricted crossdisciplinary understanding, particularly the wide power/status differences between the medical and other professions, and between staff and patients, are discussed

Characteristics of an anechoic chamber for fan noise testing

Acoustical and mechanical design features of NASA Lewis Research Center's engine fan noise facility are described. Acoustic evaluation of the chamber, which is lined with an array of stepped wedges, is described. Results from the evaluation in terms of cut-off frequency and non-anechoic areas near the walls are detailed. Fan models are electrically driven to 20,600 RPM in either the inlet mode or exhaust mode to facilitate study of both fore and aft fan noise. Inlet noise characteristics of the first fan tested are discussed and compared to full-scale levels. Turbulence properties of the inlet flow and acoustic results are compared with and without a turbulence reducing screen over the fan inlet

Experimental evaluation of shockless supercritical airfoils in cascade

Surface Mach number distributions, total pressure loss coefficients, and schlieren images of the flow are presented over a range of inlet Mach numbers and air angles. Several different trailing edge geometries were tested. At design conditions a leading edge separation bubble was observed resulting in higher losses than anticipated. The minimum losses were obtained at a negative incidence condition in which the flow was accelerating over most of the supercritical region. Relatively minor differences in losses were measured with the different trailing edge geometries studied

Distributed lag models for hydrological data

The distributed lag model (DLM), used most prominently in air pollution studies, finds application wherever the effect of a covariate is delayed and distributed through time. We explore the use of modified formulations of DLMs to provide flexible varying-coeficient models with smoothness constraints, applicable in any setting in which lagged covariates are regressed on a time-dependent response. The models are applied to simulated flow and rainfall data and to flow data from a Scottish mountain river, with particular emphasis on approximating the relationship between environmental covariates and flow regimes in order to detect the influence of unobserved processes. It was found that under certain rainfall conditions some of the variability in the influence of rainfall on flow arises through a complex interaction between antecedent ground wetness and the time-delay in rainfall. The models are able to identify subtle changes in rainfall response, particularly in the location of peak influence in the lag structure and offer a computationally attractive approach for fitting DLMs

Field survey of alternative seeding methods of canola under extreme wet weather conditions in southeast Saskatchewan, 2011

Non-Peer Reviewe