Bioaugmentation: An Emerging Strategy of Industrial Wastewater Treatment for Reuse and Discharge

A promising long-term and sustainable solution to the growing scarcity of water worldwide is to recycle and reuse wastewater. In wastewater treatment plants, the biodegradation of contaminants or pollutants by harnessing microorganisms present in activated sludge is one of the most important strategies to remove organic contaminants from wastewater. However, this approach has limitations because many pollutants are not efficiently eliminated. To counterbalance the limitations, bioaugmentation has been developed and consists of adding specific and efficient pollutant-biodegrading microorganisms into a microbial community in an effort to enhance the ability of this microbial community to biodegrade contaminants. This approach has been tested for wastewater cleaning with encouraging results, but failure has also been reported, especially during scale-up. In this review, work on the bioaugmentation in the context of removal of important pollutants from industrial wastewater is summarized, with an emphasis on recalcitrant compounds, and strategies that can be used to improve the efficiency of bioaugmentation are also discussed. This review also initiates a discussion regarding new research areas, such as nanotechnology and quorum sensing, that should be investigated to improve the efficiency of wastewater bioaugmentation

Phototrophic Bioremediation of Municipal Tertiary Wastewater Coupling with Lipid Biosynthesis Using <i>Scenedesmus dimorphus</i>: Effect of Nitrogen to Phosphorous Ratio with/without CO₂ Supplementation

Scenedesmus dimorphus was utilized for the tertiary treatment of municipal wastewater in an effort to remove nutrients from secondary treated wastewater. In addition to the concurrent generation of biomass containing lipids for biofuel production. The effect of nitrogen to phosphorous (N:P) ratios (1:1 to 8:1) in culture media without carbon dioxide (CO2) supplementation (air supply alone, Case 1) and with CO2 supplementation (2% CO2 in air, Case 2) was investigated through a series of systematic parametric batch experiments. Case 2 produces greater biomass at all N:P ratios than Case 1. In Case 1, the highest biomass output for a N:P ratio of 8:1 is 567 mg/L at pH 8.4. In Case 2, however, the maximum biomass yield is 733 mg/L when the N:P ratio is 2:1 and the pH is 7.23. Scenedesmus dimorphus is capable of absorbing nitrogen and phosphorous from wastewater in a CO2 environment and at the optimal N:P ratio. In Case 1, total nitrogen removal ranges from 28% to 100% and in Case 2, total nitrogen removal ranges from 60% to 100%, depending on the N:P ratio. For an initial concentration of 13 mg/L, the total phosphorous removal ranges from 37% to 57%, depending on the N:P ratio in both cases. Case 2 yields a maximum lipid content of 29% of the biomass dry weight when the N:P ratio is 1:1. These results suggest the viability of removing nutrients from secondary treated wastewater utilizing microalgae Scenedesmus dimorphus and lipid biosynthesis in the generated biomass

Characterisation and microbial community analysis of lipid utilising microorganisms for biogas formation.

In the anaerobic process, fat-oil-grease (FOG) is hydrolysed to long-chain fatty acids (LCFAs) and glycerol (GLYC), which are then used as substrates to produce biogas. The increase in FOG and LCFAs inhibits methanogenesis, and so far, most work investigating this inhibition has been carried out when FOG or LCFAs were used as co-substrates. In the current work, the inhibition of methanogenesis by FOG, LCFAs and GLYC was investigated when used as sole substrates. To gain more insight on the dynamics of this process, the change of microbial community was analysed using 16S rRNA gene amplicon sequencing. The results indicate that, as the concentrations of cooking olive oil (CO, which represents FOG) and LCFAs increase, methanogenesis is inhibited. For instance, at 0.01 g. L-1 of FOG, the rate of biogas formation was around 8 ml.L-1.day-1, and this decreased to = 45°C and NaCl > 3% led to a significant decrease in the rate of biogas formation. Microbial community analyses were carried out from samples from 3 different bioreactors (CO, OLEI and GLYC), on day 1, 5 and 15. In each bioreactor, microbial communities were dominated by Proteobacteria, Firmicutes and Bacteroidetes phyla. The most important families were Enterobacteriaceae, Pseudomonadaceae and Shewanellaceae (Proteobacteria phylum), Clostridiacea and Ruminococcaceae (Firmicutes) and Porphyromonadaceae and Bacteroidaceae (Bacteroidetes). In CO bioreactor, Proteobacteria bacteria decreased over time, while those of OLEI and GLYC bioreactors increased. A more pronounced increase in Bacteroidetes and Firmicutes were observed in CO bioreactor. The methanogenic archaea Methanobacteriaceae and Methanocorpusculaceae were identified. This analysis has shown that a set of microbial population is selected as a function of the substrate

Greenhouse Gas Emissions in the Industrial Processes and Product Use Sector of Saudi Arabia—An Emerging Challenge

The Kingdom of Saudi Arabia has been experiencing consistent growth in industrial processes and product use (IPPU). The IPPU’s emission has been following an increasing trend. This study investigated time-series and cross-sectional analyses of the IPPU sector. Petrochemical, iron and steel, and cement production are the leading source categories in the Kingdom. In recent years, aluminum, zinc, and titanium dioxide production industries were established. During the last ten years, a significant growth was observed in steel, ethylene, direct reduce iron (DRI), and cement production. The growth of this sector depends on many factors, including domestic and international demand, socioeconomic conditions, and the availability of feedstock. The emissions from IPPU without considering energy use was 78 million tons of CO2 equivalent (CO2eq) in 2020, and the cement industry was the highest emitter (35.5%), followed by petrochemical (32.3%) and iron and steel industries (16.8%). A scenario-based projection analysis was performed to estimate the range of emissions for the years up to 2050. The results show that the total emissions could reach between 199 and 426 million tons of CO2eq in 2050. The Kingdom has started initiatives that mainly focus on climate change adaptation and economic divergence with mitigation co-benefits. In general, the focus of such initiatives is the energy sector. However, the timely accomplishment of the Saudi Vision 2030 and Saudi Green Initiative will affect mitigation scenarios significantly, including in the IPPU sector. The mitigation opportunities for this sector include (i) energy efficiency, (ii) emissions efficiency, (iii) material efficiency, (iv) the re-use of materials and recycling of products, (v) intensive and longer use of products, and (vi) demand management. The results of this study will support the Kingdom in developing an appropriate climate change mitigation roadmap