The Effects of Supervisory Behavior on IT employees’ Job Satisfaction: An Exploratory Study

The purpose of the study is to influence positive motivational behaviors and expected satisfaction from the employees working at the organizations under close supervision. It has been monitored two supervisory behaviors on IT employees’ job satisfaction: authoritarian and positive achievement motivation behavior. Data were collected through pre-structured questionnaire from the employees working in the IT department of Real Estate and Hosing Development Industry in Bangladesh (N=80).   The data indicated that IT Supervisors were engaged in positive motivational behaviors and expected greater satisfaction from the employees under their supervision; IT employee’s job satisfactions were increased. Key words: Supervisory behavior, Job satisfaction, Organization Behavior

In Situ Monitoring of Dispersion Dynamics of Carbon Nanotubes during Sonication Using Electrical Conductivity Measurements

The main challenge in the fabrication of carbon nanotube- (CNT-) based composite materials is the optimization of the sonication time in order to obtain homogenous and uniform dispersion of CNTs. Past studies mostly relied on postprocessing characterization techniques to address this issue. In the present, however, in situ monitoring of dispersion dynamics of CNTs in distilled water is carried out using instantaneous conductivity measurements. Using a computer controlled data acquisition system, the time evolution of the solution conductivity was carefully recorded. The data were then used to evaluate the intensity of turbulent fluctuations, which clearly highlighted the existence of three distinct sonication phases. During the first phase, the conductivity fluctuations initially increased attaining ultimately a maximum, thus indicating the occurrence of large agglomerates of CNTs. During the second phase of sonication, the solution conductivity showed a rather steep increase while fluctuations steadily declined. This phenomenon can be attributed to the breakdown of large CNT agglomerates, resulting in greater dispersion homogeneity of CNTs. During the third phase, after almost 650 kJ/L of sonication energy, the conductivity increase was almost negligible. The fluctuation intensity also remained constant during this phase signifying that the further sonication was no longer required

A new classification and an extension of waste from business practices and Islamic perspective

Abstract: Taking the idea of waste as an in-use phenomenon, we developed a matrix to explain four categories of waste which result from users’ failure to use a resource properly. These categories were illustrated by examples built on practical food waste measurements, surveys, theses formatting requirements and newspaper reports. We have categorized different facets of waste from a business perspective; thus, contributed to have improved waste management practices. We also showed that parsimony was also a wasteful behaviour. Parsimony was shown to be a waste by its effects on others’ need of fulfilment and other-worldly consequences for the miser

Minimisation of image watermarking side effects through subjective optimisation

This study investigates the use of structural similarity index (SSIM) on the minimised side effect to image watermarking. For the fast implementation and more compatibility with the standard discrete cosine transform (DCT)-based codecs, watermark insertion is carried out on the DCT coefficients and hence an SSIM model for DCT-based watermarking is developed. For faster implementation, the SSIM index is maximised over independent 4 × 4 non-overlapped blocks, but the disparity between the adjacent blocks reduces the overall image quality. This problem is resolved through optimisation of overlapped blocks, but, the higher image quality is achieved at a cost of high computational complexity. To reduce the computational complexity while preserving the good quality, optimisation of semi-overlapped blocks is introduced. The authors show that while SSIM-based optimisation over overlapped blocks has as high as 64 times the complexity of the 4 × 4 non-overlapped method, with semi-overlapped optimisation the high quality of overlapped method is preserved only at a cost of less than 8 times the non-overlapped method

Evaluation of persistent-mode operation in a superconducting MgB2 coil in solid nitrogen

We report the fabrication of a magnesium diboride (MgB2) coil and evaluate its persistent-mode operation in a system cooled by a cryocooler with solid nitrogen (SN2) as a cooling medium. The main purpose of SN2 was to increase enthalpy of the cold mass. For this work, an in situ processed carbon-doped MgB2 wire was used. The coil was wound on a stainless steel former in a single layer (22 turns), with an inner diameter of 109 mm and height of 20 mm without any insulation. The two ends of the coil were then joined to make a persistent-current switch to obtain the persistent-current mode. After a heat treatment, the whole coil was installed in the SN2 chamber. During operation, the resultant total circuit resistance was estimated to be \u3c7.4x10−14 Ω at 19.5 K±1.5 K, which meets the technical requirement for magnetic resonance imaging application

Influence of Gd content on structural, electronic, thermoelectric, and optical properties of WO3

WO _3 -based semiconductor materials are optimistic competitors for modern electronic devices because of their outstanding electronic and optical properties. Simulations on pure and Gd-doped WO _3 compositions were executed using Tran and Blaha modified Becke–Johnson approximation. Experimentally, thin films of these compositions were prepared using the chemically derived technique. X-ray diffraction spectra of thin films exhibited cubic structure having space group 221-Pm-3m in all compositions. Field emission scanning electron micrographs reveal the uniform growth of thin films with rod-like compact morphology. The density of states spectra for electronic properties demonstrate the main contribution of W- d and O- p for pure WO _3 with p-d hybridization while Gd containing composition provides an additional prominent contribution from f -orbital. Band structure shows an indirect transition for WO _3 and band gap values were observed as 1.73 eV which decreased with increment of Gd content. A significant change in thermoelectric parameters was observed with an increment of temperature and Gd doping. The maximum value of the refractive index was observed as 3.02 in the visible energy regime and tends to decrease in Gd containing compositions. The experimentally obtained maximum dielectric constant was observed as 7.89 for pure WO _3 and decreased to 4.58 for maximum Gd containing composition. Optical parameters like extinction, absorption coefficient, and optical conductivity show a sharp increment in visible energy region which make these compositions favorable for photovoltaic and optoelectronic applications. The experimentally obtained optical parameters are found in good agreement with simulated results obtained through TB-mBJ approximation

Development of solar photovoltaic model for wide range of operating conditions

Assorted climatic conditions such as irradiation, temperature and shading due to clouds, trees, buildings, communication towers etc. has an unavoidable impact on the output of solar photovoltaic (PV) system. This creates a need for the analytical performance study of solar PV system in changing atmospheric condition in order to design and install an optimized solar PV system for both, stand alone and grid connected. The present work shows the developed PV model in MATLAB codes and simulation is done under varying climate conditions showing change in irradiation and temperature using different arrangements of PV system. PV parameters are obtained in different setup and I-V and P-V characteristics of the developed model of the PV modules are analyzed. A comparative study of the parameters obtained is quite beneficial for an optimized design of the PV system under different atmospheric conditions