Assessment of Bite Forces in Restored Teeth with Different Commonly Used Restorative Materials: A Comparative Study

Objective: To evaluate and compare bite force (BF) in permanent first molars restored with glass ionomer cement (GIC), composite and amalgam, and normal contralateral permanent first molars. Material and Methods: BF was recorded in decayed permanent first molars, which were filled with GIC (n=30), composite (n=30), and amalgam (n=30), and in healthy contralateral first molars (n=90) with Force Transducer Occlusal Force Meter and compared. Results: BF was significantly higher in normal teeth on the contralateral side compared to teeth restored with GIC and composite. However, in patients with amalgam restoration, though it was less compared to that on the contralateral side, it was not statistically significant (p>0.05). Conclusion: Restoring teeth with various filling materials may improve bite force. In the present study, it was found that the teeth restored with amalgam had higher bite forces in comparison to the other restorative materials used. However, it was not comparable to that observed in the normal tooth (control) on the contralateral side

A CBCT Based Three-Dimensional Assessment of Mandibular Posterior Region for Evaluating the Possibility of Bypassing the Inferior Alveolar Nerve While Placing Dental Implants

A high rate of nerve injury and related consequences are seen during implant placement in the posterior mandibular arch. An approach has been proposed to avoid nerve injury by dodging the inferior alveolar nerve (IAN) while placing an implant. A prospective study with a total of 240 CBCT (cone beam computed tomography) images of patients with three dentate statuses, namely, edentulous (group I), partially edentulous (group II) and dentate (group III) were included in the study. The nerve path tracing was done on CBCT images with On-demand 3D software. The three dimensions, i.e., the linear distance from the outer buccal cortical plate to the inferior alveolar nerve (BCPN), linear distance from the outer lingual cortical plate to the inferior alveolar nerve (LCPN) and linear distance from the midpoint of the alveolar crest to the inferior alveolar nerve (ACN) were assessed. The data were presented and analyzed between variables using one-way ANOVA and independent t-test in SPSS version 21.LCPN of the right 1st premolar region (p < 0.05) was significantly different among the groups with edentulous subjects recorded with the minimum value (6.50 ± 1.20 mm). Females were found to have significantly (p < 0.05) less available bone (6.03 ± 1.46 mm) on the right side of the mandibular jaw compared to males in edentulous group of patients. On comparing age groups for partially edentulous subjects, LCPN of the right 1st premolar region had significantly (p < 0.05) less available bone (6.03 ± 0.38 mm) in subjects with age ≥54 years. The IAN follows a lingual course in the molar region and later flips to the buccal side in the premolar region. The LCPN dimension in the 1st and 2nd premolar region was found to be more than 6 mm irrespective of age, gender and side of the jaw. Thus, it can be considered as a suitable site for placing implants while bypassing the IAN with CBCT assessment remaining as the mainstay in the pre-surgical phase

Periodontal Clinical Parameters as a Predictor of Bite Force: A Cross-Sectional Study

Objective. To investigate the correlation of periodontal parameters and bite force in different stages of periodontitis after phase I periodontal therapy. Methods. Periodontal clinical parameters such as mobility, attachment loss, gingival recession, and percentage of bone remaining were recorded at the mandibular first molar region after phase I therapy in subjects categorized according to the stage of periodontitis. Corresponding bite force was recorded at the first mandibular molar region using a bite force device after phase I therapy. ANOVA test was used to assess the significant difference among different groups. Pearson correlation coefficient was used to assess the correlation between measured variables. Results. The ANOVA test represents that there is no statistical significant difference between the bite force in stage I, stage II, and stage III type of periodontitis. A strong positive correlation was found (r=0.537) between bite force and percentage of remaining alveolar bone support whereas negative correlation was observed in measured parameters such as mobility (r=−0.0181), attachment loss (r=−0.608), and gingival recession (r=−0.435). Conclusion. Among all periodontal clinical parameters, the percentage of remaining alveolar bone is the strong predictor of bite force and mobility; attachment loss and gingival recession cannot predict the bite force in the first molar region. Bite force is variable in different stages of periodontitis

Quantitative Assessment of Gingival Inflammation in Patients Undergoing Nonsurgical Periodontal Therapy Using Photometric CIELab Analysis

Visual inspection and gingival indices have been traditionally used for diagnosis of gingival inflammation. These methods are prone for subjective variability. Thus, the study is aimed at evaluating gingival inflammation quantitatively by using CIELab colour space value obtained from digital photographs. An experimental study was conducted with 27 patients each in group A (gingivitis) and group B (chronic periodontitis, CP). Preoperative and postoperative (1 month) photographs of maxillary anterior sextant were recorded to evaluate CIELab coordinate values. Simultaneously, clinical parameters such as bleeding on probing (BOP) and periodontal probing depth (PPD) along with indices such as plaque index (PI), gingival index (GI), and sulcus bleeding index (SBI) were evaluated before and after the nonsurgical periodontal therapy. Data was presented as the mean±SD, and a paired t-test was used for the testing hypothesis with p<0.05 considered as significant. Data analysis was carried out with Statistical Package for the Social Sciences (SPSS) version 21. A significant reduction (p<0.001) is seen in all the clinical parameters and indices before and after the intervention in chronic periodontitis patients. Similar results were seen in gingivitis patients (p<0.001) except for PPD. A significant (p<0.001) reduction in postoperative values of the a∗ and b∗ coordinates was seen in CP patients; whereas, only the a∗ coordinate value reported a significant (p<0.001) reduction in the gingivitis group of patients. The ΔE of the gingivitis and chronic periodontitis groups was 2.25 and 2.96, respectively. Within the confinements of the study, estimating the gingival colour with the help of CIELab values taken via digital photographs can be an excellent valuable tool to assess the gingival colour as a sign of gingival inflammation

Unveiling the Influence of the Curve of Spee on Bite Force and Chewing Ability: A Comparative Study

Aim. To investigate the impact of the curve of Spee (CS) accentuation on bite force, chewing ability, and additionally, other factors that influence chewing ability and bite force such as restorations, caries, gender, habits, and TMJ problems. Materials and Methods. 231 participants (118 male and 113 female, mean age = ±27.96 years) were recruited for this cross-section study. Participants completed a data collection sheet in which age, gender, Angle’s classification of malocclusion, overjet, overbite, TMJ problems, habits, restorations, and caries experience were recorded. Two examiners made a lower impression, chewing ability test and measured the bite force for each participant. Measurement of the CS was obtained digitally from the poured dental cast, and the categorization was as follows: flat (2 mm). Results. The mean maximum bite force (MBF) was 468.722 N for participants with flat CS, 389.822 N for normal CS, 647.08 N for deep CS, and 384.667 N for reverse CS. The average MBF was higher for participants with deep CS (p0.05). Also, a significant difference in bite force and chewing ability was found between the three categories of CS (p<0.05). Conclusion. Bite force variations across various CS types were linked to gender and habits. Chewing ability showed no differences concerning gender, habits, TMJ problems, caries, or restorations, emphasizing CS’s significant impact on bite force while showcasing the unchanged nature of chewing ability amidst diverse factors

A Countrywide Survey in Saudi Arabia Regarding the Knowledge and Attitude of Health Care Professionals about Coronavirus Disease (COVID-19)

Coronavirus disease (COVID-19) has emerged as a pandemic. The updated knowledge and a positive attitude of health care professionals (HCPs) towards fighting any pandemic is the key to success. Thus, the present study aims to assess the knowledge and attitude of HCPs towards COVID-19 in the Kingdom of Saudi Arabia (KSA). A cross-sectional study was conducted across the KSA, covering its five geographical regions with a non-probability quota sample. Twenty-nine, close-ended questions evaluating the knowledge and attitude domain were included in the questionnaire. It was developed with the help of Qualtrics software and circulated among the HCPs through the electronic mode. We analyzed data from about 1040 HCPs using the statistical package of social sciences (SPSS) v.21. All variables were presented in number and percentages. Univariate and multivariate logistic regression was performed to explore the odds ratio (OR) and adjusted odds ratio (aOR) of independent variables for inadequate knowledge and attitude. Considering the &ldquo;good&rdquo; level of the respective domain, the HCPs have displayed better knowledge (48.2%) over attitude (33.8%). Female (aOR: 1.55; 95% CI: 1.15&ndash;2.09; p = 0.004), Diploma degree (aOR: 2.51; 95% CI: 1.64&ndash;3.83; p &lt; 0.001), 7&ndash;10 years&rsquo; experience (aOR: 1.47; 95% CI: 1.01&ndash;2.15; p = 0.045) were at higher risk of having inadequate knowledge compared to their contemporaries. Among the sources, the Ministry of Health (MOH) website was the most popular source of information (76%). The knowledge and attitude of HCPs regarding COVID-19 was similar across all the regions of KSA. However, the continuing education program is warranted to fill the potential gap in knowledge for HCPs in higher-risk groups

Outcome Assessment after Reconstruction of Tumor-Related Mandibular Defects Using Free Vascularized Fibular Flap—A Clinical Study

The objective of this study was to analyze the outcomes of the free vascularized fibular flap in the reconstruction of mandibular defects, and to assess the oral health impact profile of these patients before surgery and after oral rehabilitation. Patients requiring reconstruction of defects greater than 6 cm were selected for this study. The defect size and type, the size of the required skin paddle, the need for second flaps, the intraoperative complications, and the type of closure were documented. Patients were evaluated postoperatively for function, aesthetics, and donor- or reconstruction-site complications. The validated oral health impact profile (OHIP-14) questionnaires were filled before and after surgery and after dental rehabilitation. This study included 11 cases of squamous-cell carcinomas, 2 cases of malignant nerve sheath tumors, and 1 case each of malignant melanoma, ameloblastoma, giant-cell tumor, osteosarcoma, and chondrosarcoma. The analysis revealed a significant association (p = 0.030) of gender with free vascular flap complications, while no significant association (p > 0.05) was found when donor- and recipient- site complications, as well as the type of resection (Brown’s classification), were compared with free vascular flaps. Moreover, the total OHIP-14 scores for patients before surgery, after surgery, and after dental rehabilitation were 12.03 ± 1.34, 10.66 ± 1.41, and 08.33 ± 0.62, respectively. The oral health-related quality of life was markedly improved after the reconstruction of the mandibular defects with free vascularized fibular flap and dental rehabilitation. The overall success rate of fibular flap in our study was 72.2%, which is lower than that reported in the literature. This may be attributed to the fact that almost all of our cases included large segmental defects that extended across the midline of the mandible

Cone-Beam Computed Tomography: A New Tool on the Horizon for Forensic Dentistry

Teeth and bones of calvarium are important structures from a forensic point of view, as they are extremely resilient to destruction or decomposition, even under temperature variations. Radiology is inevitably an important tool in forensic investigations. Maxillofacial radiology provides a considerable amount of information for the identification of remains and evidence in case of legal matters. The advent of cone-beam computed tomography (CBCT) in the arena of maxillofacial 3D imaging has contributed immensely to forensic science such as the age estimation through teeth, analysis of bite marks, determination of race and sex, etc. The advantages of accuracy in imaging the anatomy, digitized technology favoring easier comparison of records and storage of records for a longer period, cost reduction, dose reduction, and easier portability have made it an unavoidable adjunct in forensic investigations. The aim of this paper is to review and highlight the importance of CBCT in successful forensic identification and analysis. This review is written to address the various aspects of CBCT as a recently developed technology that may be very useful in some forensic contexts, based on searches for current studies in the literature using PubMed, Scopus, Web of Science, and Google Scholar databases, to identify studies published since inception to December 2021, with no language restriction. In conclusion, CBCT is an accessible 3D imaging technology with many applications, one of them being in forensic sciences

Evaluation of Stress Distribution and Force in External Hexagonal Implant: A 3-D Finite Element Analysis

Purpose: To analyze the stress distribution and the direction of force in external hexagonal implant with crown in three different angulations. Materials and Methods: A total of 60 samples of geometric models were used to analyze von Mises stress and direction of force with 0-, 5-, and 10-degree lingual tilt. Von Mises stress and force distribution were evaluated at nodes of hard bone, and finite element analysis was performed using ANSYS 12.1 software. For calculating stress distribution and force, we categorized and labeled the groups as Implant A1, Implant A2, and Implant A3, and Implant B1, Implant B2, and Implant B3 with 0-, 5-, and 10-degree lingual inclinations, respectively. Inter- and intra-group comparisons were performed using ANOVA test. A p-value of ≤0.05 was considered statistically significant. Results: In all the three models, overall maximum stress was found in implant model A3 on the implant surface (86.61), and minimum was found on model A1 in hard bone (26.21). In all the three models, the direction of force along three planes was maximum in DX (0.01025) and minimum along DZ (0.002) direction with model B1. Conclusion: Maximum von Mises stress and the direction of force in axial direction was found at the maximum with the implant of 10 degrees angulation. Thus, it was evident that tilting of an implant influences the stress concentration and force in external hex implants

Assessing the Prevalence and Association of Pulp Stones with Cardiovascular Diseases and Diabetes Mellitus in the Saudi Arabian Population—A CBCT Based Study

The detection of pulp stone in a patient suffering from undiagnosed systemic diseases can be an early diagnostic indicator. Thus, the aim of the study was to assess the prevalence of pulp stones in the Saudi Arabian population with cardiovascular diseases and diabetes mellitus. In a retrospective study, we included cone-beam computed tomography (CBCT) scans of 73 patients with cardiovascular disease and 76 patients with diabetes mellitus as group I and II, respectively. Group III comprised of CBCT scan of 80 healthy controls. From a total of 229 scans, 4807 teeth were screened for pulp stones throughout the arches. A chi-square test was used for comparing the prevalence of pulp stones among the groups. Univariable and multivariable analysis was done to evaluate the independent risk indicators for pulp stones. The tooth-wise prevalence of pulp stones in group I, II, and III was found to be 16.65%, 9.01%, and 3.86%, respectively. Patient-wise (p &lt; 0.01) and tooth-wise (p &lt; 0.01) prevalence was recorded significantly highest in the cardiovascular group followed by the diabetic group. The control group had the least prevalence. Significantly (p &lt; 0.01) higher number of pulp stones were found in cardiovascular patients with age &gt; 50 years compared to other groups. Similarly, a significantly increased number of pulp stones were seen in the 1st molar (p &lt; 0.05) and the maxillary jaw (p &lt; 0.05) of patients with cardiovascular diseases. Subjects with cardiovascular disease and diabetes were found to have 2.94 times (p &lt; 0.001; CI 1.54&ndash;3.10) and 1.81 times (p &lt; 0.01; CI 0.48&ndash;2.06) higher risk of having pulp stones in comparison to healthy subjects. The first molar has 2.20 times (p &lt; 0.001; CI 0.84&ndash;2.45) increased the risk of having pulp stones compared to other tooth types. Systemic disease such as cardiovascular disease and diabetes mellitus poses a higher risk for the development of pulp stones. Among the systemic disease group, patients in the cardiovascular group showed a higher risk for pulp stones and also reported the maximum number of pulp stones compared to the diabetic and healthy subjects