Fabrication of submicrometer high refractive index tantalum pentoxide waveguides for optical propulsion of microparticles

Design, fabrication, and optimization of tantalum pentoxide (Ta2O5) waveguides to obtain low-loss guidance at a wavelength of 1070 nm are reported. The high-refractive index contrast (Δn ~ 0.65, compared to silicon oxide) of Ta2O5 allows strong confinement of light in waveguides of submicrometer thickness (200 nm), with enhanced intensity in the evanescent field. We have employed the strong evanescent field from the waveguide to propel micro-particles with higher velocity than previously reported. An optical propelling velocity of 50 µm/s was obtained for 8 µm polystyrene particles with guided power of only 20 mW

Retriever is a multiprotein complex for retromer-independent endosomal cargo recycling

Following endocytosis into the endosomal network, integral membrane proteins undergo sorting for lysosomal degradation or are retrieved and recycled back to the cell surface. Here we describe the discovery of an ancient and conserved multiprotein complex that orchestrates cargo retrieval and recycling and, importantly, is biochemically and functionally distinct from the established retromer pathway. We have called this complex 'retriever'; it is a heterotrimer composed of DSCR3, C16orf62 and VPS29, and bears striking similarity to retromer. We establish that retriever associates with the cargo adaptor sorting nexin 17 (SNX17) and couples to CCC (CCDC93, CCDC22, COMMD) and WASH complexes to prevent lysosomal degradation and promote cell surface recycling of α5β1 integrin. Through quantitative proteomic analysis, we identify over 120 cell surface proteins, including numerous integrins, signalling receptors and solute transporters, that require SNX17-retriever to maintain their surface levels. Our\ua0identification of retriever establishes a major endosomal retrieval and recycling pathway

Structured surface wetting of a PTFE flow-cell for terahertz spectroscopy of proteins

We have fabricated a terahertz compatible polytetrafluoroethylene (PTFE) based microfluidic flow-cell, in which terahertz time-domain spectroscopy of a range of concentrations of aqueous bovine serum albumin (BSA) was performed, demonstrating the device's suitability for future studies of biomolecular interactions. The novel combination of oxygen plasma treatments and milling was used to both increase and decrease the wettability of the channel and surrounding substrate (to superhydrophobic levels) respectively, producing a stark contrast in contact angles allowing surface tension effects to confine liquid in the channel. PTFE is a chemically inert, bio-compatible material with ideal spectroscopic properties at sub-millimetre wavelengths.</p

THz spectroscopy of BSA in a surface-tension confined flow-cell

A novel combination of oxygen plasma treatments and machining was used to modify the surface wetting of polytetrafluorethylene (PTFE) to develop a terahertz compatible microfluidic flow-cell that confines aqueous samples with surface tension forces. By increasing the wettability of the water channel and creating superhydrophobic nanostructures on the surrounding substrate, a stark contrast in contact angles was produced that leads to the principle confinement effect. Terahertz time-domain spectroscopy (THz-TDS) was performed on a range of bovine serum albumin (BSA) concentrations, demonstrating the potential for using this chemically inert, bio-compatible material for investigating protein hydration dynamics with THz spectroscopy.</p

Fabrication and optimization of Tantalum Pentoxide waveguides for optical micro-propulsion

Design, fabrication and optimization of high refractive index (2.1 @ 1070 nm), sub-micron thickness (200 nm) Tantalum Pentoxide waveguides is reported. Optimization of fabrication parameters reduces the propagation loss to ~ 1 dB/cm @ 1070 nm for Ta2O5 waveguides. Ta2O5 waveguides were found to be stable for high power application with no significant absorption peaks over a large range of wavelengths (600-1700 nm). Ta2O5 waveguides provide high intensity in the evanescent field, which is useful for efficient optical propelling of micro-particles. We have employed Ta2O5 waveguide to propel polystyrene micro-particles with 50 µm/s velocity

Optical fiber nanowires and microwires: fabrication and applications

Microwires and nanowires have been manufactured by using a wide range of bottom-up techniques such as chemical or physical vapor deposition and top-down processes such as fiber drawing. Among these techniques, the manufacture of wires from optical fibers provides the longest, most uniform and robust nanowires. Critically, the small surface roughness and the high-homogeneity associated with optical fiber nanowires (OFNs) provide low optical loss and allow the use of nanowires for a wide range of new applications for communications, sensing, lasers, biology, and chemistry. OFNs offer a number of outstanding optical and mechanical properties, including (1) large evanescent fields, (2) high-nonlinearity, (3) strong confinement, and (4) low-loss interconnection to other optical fibers and fiberized components. OFNs are fabricated by adiabatically stretching optical fibers and thus preserve the original optical fiber dimensions at their input and output, allowing ready splicing to standard fibers. A review of the manufacture of OFNs is presented, with a particular emphasis on their applications. Three different groups of applications have been envisaged: (1) devices based on the strong confinement or nonlinearity, (2) applications exploiting the large evanescent field, and (3) devices involving the taper transition regions. The first group includes supercontinuum generators, a range of nonlinear optical devices, and optical trapping. The second group comprises knot, loop, and coil resonators and their applications, sensing and particle propulsion by optical pressure. Finally, mode filtering and mode conversion represent applications based on the taper transition regions. Among these groups of applications, devices exploiting the OFN-based resonators are possibly the most interesting; because of the large evanescent field, when OFNs are coiled onto themselves the mode propagating in the wire interferes with itself to give a resonator. In contrast with the majority of high-Q resonators manufactured by other means, the OFN microresonator does not have major issues with input-output coupling and presents a completely integrated fiberized solution. OFNs can be used to manufacture loop and coil resonators with Q factors that, although still far from the predicted value of 10. The input-output pigtails play a major role in shaping the resonator response and can be used to maximize the Q factor over a wide range of coupling parameters. Finally, temporal stability and robustness issues are discussed, and a solution to optical degradation issues is presented