Effect of pre harvest foliar spray of growth regulators on pre and post harvest parameters in ornamental sunflower genotype M-17R

An experiment was conducted to study the effect of pre harvest foliar application of growth regulators on the pre and post harvest flower quality in ornamental sunflower during the year 2012-13, at College of Horticulture, GKVK campus, UHS, Bagalkot. At 60 DAS highest plant height was with GA3 @ 150 ppm (154.73 cm) followed by GA3 @ 200 ppm (146.20 cm) and GA3 @ 250 ppm (145.53 cm). Sodium silicate @ 250 ppm (4508.77 cm2) registered maximum plant spread at 60 DAS. Foliar application of GA3 @ 150 ppm (25.00) produced highest number of leaves which was at par with Sodium silicate @ 250 ppm, GA3 @ 200 ppm and GA3 @ 250 ppm recording 24.87, 24.80 and 24.67 leaves respectively. Calcium sulphate @ 200 ppm registered highest leaf area of (4930.30 cm2) which was at par with Sodium silicate @ 250 ppm, Calcium sulphate @ 300 ppm, Chlormequat chloride @ 500 ppm, Sodium silicate @ 350 ppm, and Chlormequat chloride @ 1000 ppm with 4792.64, 4735.04, 4721.75, 4503.05 and 4430.02 cm2 respectively

Biochemical characterization of defense responses in rose genotypes in response to artificial inoculation with black spot pathogen Diplocarpon rosae

Resistance responses in the leaves of eight rose genotypes, Knock Out (highly resistant), Arka Nishkant (moderately resistant), R. multiflora (highly susceptible), Arka Swadesh (highly susceptible), IIHRR 13-4 (susceptible), Arka Parimala (susceptible), R. indica (susceptible) and IIHRR 4-15-12 (moderately susceptible), exhibiting varied levels of resistance against black spot were investigated post artificial inoculation with black spot pathogen, Diplocarpon rosae. There was consistent increase in the activities of defense related enzymes such as catalase, peroxidase, polyphenol oxidase, superoxide dismutase and phenylalanine ammonia lyase and other defense related secondary metabolites like phenols and flavonoids at different phases of black spot progression and increase was high in resistant genotypes Knock Out and Arka Nishkant. The peak activity of defense enzymes and high concentration of other metabolites was witnessed during early stages of infection in the resistant genotypes while it was during later phase in the susceptible genotypes. These results suggested that the faster and stronger activation of defense system is associated with the resistance against black spotin the rose genotypes

Evaluation of ornamental sunflower for value addition

An experiment was conducted at College of Horticulture, GKVK, campus, Bengaluru, UHS, Bagalkot during 2012-13 to study the suitability of ornamental sunflower for dry flower production. Highest flower weight loss was with corn meal and silica gel (90.75 and 88.45 per cent). Silica gel followed by borax powder took least number of days for drying of flower heads (9.40 and 12.60 days respectively). Colour retention in dried ornamental sunflower was highest with control treatment and silica gel with a score of 4.63 and 4.44. Flower appearance was best with silica gel (4.44) which was at par with control with a score of 3.81. Best texture score of (4.31) was highest with silica gel followed by control (shade), corn meal and alum powder which recorded 3.63, 3.31 and 3.25 respectively. Best flower shape after drying period as with silica gel (4.38).The results reveal silica gel and corn meal as best drying agents in ornamental sunflower

Genetic Variability for Quantitative Traits in China Aster [Callistephus chinensis (L.) Nees]

A field study was conducted to estimate genetic variability, heritability and genetic advance in 20 genotypes of China aster for 15 traits during the year 2012-13 in Randomized Complete Block Design, with three replications. Results revealed that the magnitude of phenotypic co-efficient of variation (PCV) was higher than genotypic co-efficient of variation (GCV) for all the traits studied. Narrow differences between GCV and PCV were recorded in all the characters except flowering duration, vase-life and shelf-life, indicating little environmental influence on expression of these characters. High (>20%) GCV and PCV were recorded for plant height, number of branches and leaves per plant, flower diameter, number of ray and disc florets/flower head, stalk length, and, number and weight of flowers/plant. Heritability estimates ranged from 28.30% (flowering duration) to 99.54% (flower diameter). High heritability (<60%) was observed for all the traits except flowering duration. High heritability, coupled with high genetic advance as per cent mean, was recorded for flower diameter, stalk-length, number of branches/plant, weight of flowers/plant, days to first flower opening, days to 50 per cent flowering, plant height, number of leaves/plant, number of ray and disc florets/flower head, number of flowers/plant, indicating a possible role of additive gene action. Thus, these traits can be improved through selection and breeding

Standardisation of agro-techniques for flower quality parameters in ornamental sunflower (Helianthus annus L.)

An experiment was carried out on standardisation of agro-techniques for flower quality parameters in ornamental sunflower during 2012-13 at GKVK, campus, College of Horticulture, University of Horticultural Sciences, Bagalkot. In three way interaction effect longest stalk length (36.33) was in the treatment combination of mulching i.e M1 (with mulch) with a spacing of S1 (60 cm x 40 cm) at the fertilizer rate F1 (40:60:40 NPK kg ha-1). Stalk girth was maximum with mulching treatment of M1 (with mulch) at a spacing of S1 (60 cm x 40 cm) with the fertilizer rate of F3 (80:90:80 NPK kg ha-1) and without mulch at the spacing of S1 (60 cm x 40 cm) with fertilizer rate of F3 (80:90:80 NPK kg ha- 1) recording 0.49 and 0.46 cm respectively. Mulching i.e M1 (with mulch) at spacing S1 (60 cm x 40 cm) with fertilizer rate if F3 (80:90:80 NPK kg ha-1) produced plants with largest flower head diameter (13.24 cm). The treatment combinations of M1 (with mulch) + S1 (60 cm x 40 cm) + F3 (80:90:80 NPK kg ha-1) 4.65 cm recorded broadest flower disc diameter. Considering the results ornamental sunflower can be grown best without mulching, at a spacing of 60 x 30 cm or 60 x 40 cm with optimum to higher fertilizer dose to give best flower quality in ornamental sunflower

Effect of Rotation on Natural Convection in Differentially Heated Rotating Enclosure by Numerical Simulation

Natural convection heat transfer in a two dimensional unsteady rotating differentially heated enclosure is studied numerically in this paper. The enclosure is filled with air and executes a steady counterclockwise rotation about the centre of the enclosure. A finite volume code on a staggered grid arrangement with TDMA algorithm is developed and employed to solve the governing equations subject to Boussinesq approximation. The numerical investigation is carried out for fixed Prandtl number equal to 0.71, Rayleigh number equal to1.1×〖10〗^5 while Taylors number vary from5.2×〖10〗^4 to 3.3×〖10〗^5and Rotational Rayleigh number from 4.9×〖10〗^2 to 3.1×〖10〗^3.Results reveal that there are considerable change in heat transfer rates beyond 15 rpm. The effect of rotation on the Nusselt number for a given Rayleigh number is shown in the present work which is not normally indicated and discussed in the available literatur

Open Data from the Third Observing Run of LIGO, Virgo, KAGRA, and GEO

The global network of gravitational-wave observatories now includes five detectors, namely LIGO Hanford, LIGO Livingston, Virgo, KAGRA, and GEO 600. These detectors collected data during their third observing run, O3, composed of three phases: O3a starting in 2019 April and lasting six months, O3b starting in 2019 November and lasting five months, and O3GK starting in 2020 April and lasting two weeks. In this paper we describe these data and various other science products that can be freely accessed through the Gravitational Wave Open Science Center at https://gwosc.org. The main data set, consisting of the gravitational-wave strain time series that contains the astrophysical signals, is released together with supporting data useful for their analysis and documentation, tutorials, as well as analysis software packages

Open data from the third observing run of LIGO, Virgo, KAGRA and GEO

The global network of gravitational-wave observatories now includes five detectors, namely LIGO Hanford, LIGO Livingston, Virgo, KAGRA, and GEO 600. These detectors collected data during their third observing run, O3, composed of three phases: O3a starting in April of 2019 and lasting six months, O3b starting in November of 2019 and lasting five months, and O3GK starting in April of 2020 and lasting 2 weeks. In this paper we describe these data and various other science products that can be freely accessed through the Gravitational Wave Open Science Center at https://gwosc.org. The main dataset, consisting of the gravitational-wave strain time series that contains the astrophysical signals, is released together with supporting data useful for their analysis and documentation, tutorials, as well as analysis software packages.Comment: 27 pages, 3 figure

Search for Eccentric Black Hole Coalescences during the Third Observing Run of LIGO and Virgo

Despite the growing number of confident binary black hole coalescences observed through gravitational waves so far, the astrophysical origin of these binaries remains uncertain. Orbital eccentricity is one of the clearest tracers of binary formation channels. Identifying binary eccentricity, however, remains challenging due to the limited availability of gravitational waveforms that include effects of eccentricity. Here, we present observational results for a waveform-independent search sensitive to eccentric black hole coalescences, covering the third observing run (O3) of the LIGO and Virgo detectors. We identified no new high-significance candidates beyond those that were already identified with searches focusing on quasi-circular binaries. We determine the sensitivity of our search to high-mass (total mass $M>70$ $M_\odot$) binaries covering eccentricities up to 0.3 at 15 Hz orbital frequency, and use this to compare model predictions to search results. Assuming all detections are indeed quasi-circular, for our fiducial population model, we place an upper limit for the merger rate density of high-mass binaries with eccentricities $0 < e \leq 0.3$ at $0.33$ Gpc$^{-3}$ yr$^{-1}$ at 90\% confidence level.Comment: 24 pages, 5 figure

PEGylated systems in pharmaceutics

This review addresses the use of poly(ethylene glycol) (PEG) and PEG conjugation for the design of novel dosage forms and the modification of biomolecules. The peculiarities of PEGylated nanoparticles, liposomes, proteins, enzymes, and small drug and polyelectrolyte molecules and their influence on systemic drug delivery, including overcoming of various biological barriers and adhesion to mucosal tissues (mucoadhesion), are considered