Machine learning-based prediction of a BOS reactor performance from operating parameters

A machine learning-based analysis was applied to process data obtained from a Basic Oxygen Steelmaking (BOS) pilot plant. The first purpose was to identify correlations between operating parameters and reactor performance, defined as rate of decarburization (dc/dt). Correlation analysis showed, as expected a strong positive correlation between the rate of decarburization (dc/dt) and total oxygen flow. On the other hand, the decarburization rate exhibited a negative correlation with lance height. Less obviously, the decarburization rate, also showed a positive correlation with temperature of the waste gas and CO2 content in the waste gas. The second purpose was to train the pilot-plant dataset and develop a neural network based regression to predict the decarburization rate. This was used to predict the decarburization rate in a BOS furnace in an actual manufacturing plant based on lance height and total oxygen flow. The performance was satisfactory with a coefficient of determination of 0.98, confirming that the trained model can adequately predict the variation in the decarburization rate (dc/dt) within BOS reactors. View Full-Tex

Effect of Ni alloying on the microstructural evolution and mechanical properties of two duplex light-weight steels during different annealing temperatures : experiment and phase-field simulation

This paper presents a study of two lightweight steels, Fe-15Mn-10Al-0.8C-5Ni and Fe-15Mn-10Al-0.8C where strength is dependent upon the microstructure of 2nd phase precipitates. We investigate the effects of annealing temperature from 500 °C to 1050 °C on the precipitation of ordered phases size and morphology through phase-field modelling and experimental studies based on laboratory scale annealing and characterization. The chemical composition of carbides and B2 compounds as a function of isothermal annealing temperature and the matrix within which they formed are elucidated in this study. It is found that nano-sized disk-shaped B2 particles form at higher annealing temperatures (e.g. 900 °C and 1050 °C). The simulation results on carbides demonstrated the effects of energetic competition between interfacial energy and elastic strain energy on the morphological evolution of carbides. In addition to that, different ordering behaviours observed depending on the Ni content into the steel. The results demonstrate processing route designed through the phase-field simulations led to a better combination of strength and ductility. The tensile testing results indicate an increase in the strength and elongation when B2 precipitate morphology changes from micro-size faceted shape to nano-size disk-like particles

Characterisation of solidification using combined confocal scanning laser microscopy with infrared thermography

Confocal scanning laser microscopy is a growing technique as it offers the unique capability to observe (amongst other things) the solidification of high melting point materials such as steels. Here this technique has been expanded to incorporate an infrared thermographer to gain bulk information about solidification of both pure iron and a low carbon steel. This technique shows a clear indication of the onset and competition of solidification at rates up to 10 °C/s and as such becomes more applicable to the rates expected during steel casting compared to conventional calorimetry

The solubility of specific metal oxides in molten borate glass

The solubility of Co3O4, Cu2O, CuO, NiO, and Mn2O3 in molten B2O3 and Na2O–2B2O3 has been studied at a temperature of 900°C under static conditions. The concentration of the dissolved metal oxides was determined by X-EDS and XPS elemental analysis. Uniformity of metal distribution has been confirmed using X-EDS and backscatter electron image mapping. It was found that the solubility of all metal oxides increased significantly with Na2O content in the B2O3 solvent. The impact of a temperature increase of 150°C and the influence of K2O doping were evaluated and found to not cause any significant change

Metal recovery by electrodeposition from a molten salt two-phase cell system

A novel electrochemical recovery method of Co, Cu, Mn and Ni from a reactor based on two immiscible molten phases, to enable selective metal plating, sufficient feedstock dissolution and protection from re-oxidation, was designed and characterised through voltammetry and chronoamperometry. The immiscible phases in the electrolytic cell were NaCl and Na2O-2B2O3 at 1173 K, and the metal feedstock to be recovered was either metal chlorides or metal oxides of Co, Cu, Mn and Ni. Metals could be successfully recovered as plated metal deposits and the formal redox reaction potentials were reported. Metals thermodynamic behaviour differences between the cells were analysed. Analysis of the metal deposits showed that the recovered metals were of high purity (∼99%). This offers an alternative method to recycle valuable metals present in the growing e-waste stream

Spontaneous emulsification as a function of material exchange.

Direct visualization at 1873 K of 0% to 8% molten FeAl droplets suspended in a SiO2 enriched oxide medium was carried out to image the evolution of droplet morphology during reaction between Al and SiO2. Phenomena such as perturbation growth, necking and budding of offspring droplets from a bulk body are observed. The observations are used to discuss and inform a new approach to the nature of interfacial tension and the impact this has on concepts used to define interfacial tension for a two phase system with material exchange across the interface. The mapping of global interfacial tension coupled with free energy dissipation has been used to give an energetic reasoning as to the behaviour seen with respect to aluminium content in the metal phase

Hidden phenomena during transient reaction trajectories in liquid metals processing

The transient trajectory taken for a system striving toward equilibration has consequences on the rate of processes and on the chemical and physical state of products in metallurgical processes. A case study approach to recent advancements in liquid steel processing is given. A combination of techniques and knowledge developed is given as a targeted showcase of the authors’ contributions to the understanding of liquid metal droplet reactions and their contribution to the large-scale production processes within the steel industry. Examples relevant to novel ironmaking technologies, oxygen steelmaking, ladle metallurgy, and continuous casting are discussed, showing the range of processes that benefit from greater understanding in this area. This article considers specifically the reaction of liquid ferrous droplets, immersed in molten oxides, involving key alloying components, including phosphorus, aluminum, and carbon. The studies use high-temperature–confocal scanning laser microscopy (HT-CSLM), X-ray computed tomography (XCT), phase-field modeling, and in situ limited angle X-ray imaging. These techniques have seen significant development over recent years, and the combination of these powerful tools reveals the occurrence of spontaneous emulsification driven by chemical reaction (in the case of oxygen/phosphorus/aluminum reactions) and gas-phase formation (in the case of decarburization) both internally and externally to a steel droplet. A key finding is that the interfacial area pertinent for the heterogenous reactions to occur changes considerably (by up to an order of magnitude) depending on the chemical driving force. Additional key findings include the shift between preferential internal and external gas nucleation during decarburization, an inflection point of behavior as to whether or not spontaneous emulsification will occur (within the study discussed, this is between 3 and 4 wt pct Al) and the pathway of perturbation growth through which spontaneous emulsification occurs, including the physical maxima a perturbation will grow to before breaking away from the parent droplet

Control of intermetallic nano-particles through annealing in duplex low density steel

In high Al-low-density steels for future vehicle light weighting, it is vital to design a thermal profile to form and retain the uniformly dispersed nanosize B2-type intermetallic precipitates that are crucial for the material strength. In this paper, the influence of heating rate, during annealing to 1050◦C was simulated in a Au-image furnace. The post annealing structure was then characterized and two different morphologies of B2 particles were observed: triangle-like with a few micrometres and disk-like precipitates with a diameter of around a few hundred nanometres. It was found that a slower heating rate (2.5 ◦C/s) led to an increase in the volume fraction and to uniform distribution of particles within the microstructure and considerably affected the shape and size of the precipitates

Effect of temperature, oxygen partial pressure and current on the kinetics of the noble-metal / YSZ interfacial reaction

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Materials Science and Engineering, 1998.Includes bibliographical references (p. 171-174).by Sridhar Seetharaman.Ph.D

A phase-field method coupled with CALPHAD for the simulation of ordered κ-carbide precipitates in both disordred γ and α phases in low density steel

In order to simulate multi-component diffusion controlled precipitation of ordered phases in low density steels using the phase-field method, the Gibbs free energy of the γ, α and κ phases in the quaternary Fe-Mn-Al-C system was linked to the CALPHAD method using a three-sublattice model which is based on the accumulation of considerable thermodynamic data in multi-component systems and the assurance of continuous variation of the interface area. This model includes the coherent precipitation of κ phase from a disordered FCC γ phase and semi-coherent precipitation of the same κ phase from a disordered BCC α structure. The microstructure evolution of κ- carbide was simulated with three-dimensional phase-field model. The simulation was first performed for a single particle in both γ and α phases to investigate the evolution of interfacial and elastic strain energy during the precipitation process. The simulation results show that κ has a cuboidal morphology in γ and elongated plate-like morphology in α which is in agreement with the morphologies reported in the literature. The multi-particle simulations were also performed for the precipitation of κ phase from both disordered γ and α. The results also demonstrate that the size of κ precipitates in γ is remarkably smaller than that in α phase