2,905 research outputs found
Recommended from our members
Impermeable Thin Al2O3 Overlay for TBC Protection From Sulfate and Vanadate Attack in Gas Turbines Quarterly Report
In order to improve the hot corrosion resistance of conventional YSZ TBC system, the overlay of Al{sub 2}O{sub 3} coating was deposited on the TBC by EB-PVD techniques. Hot corrosion tests were carried out on the TBC with and without Al{sub 2}O{sub 3} coating in molten salts mixtures (Na{sub 2}SO{sub 4} + 5%V{sub 2}O{sub 5}) at 950 C for 10h. The microstructures of TBC and overlay before and after exposure were examined by means of scanning electron microscopy (SEM), energy-dispersive X-ray spectrometer (EDX) and X-ray diffraction (XRD). It has been found that TBC will react with V{sub 2}O{sub 5} to form YVO{sub 4}. A substantial amount of M-phase was formed due to the leaching of Y{sub 2}O{sub 3} from YSZ. Al{sub 2}O{sub 3} overlay coating deposited by EB-PVD was dense, continues and adherent to the TBC. As a result, overlay Al{sub 2}O{sub 3} coating can prevent the YSZ from the attack by molten salts containing vanadium and arrest the penetration of salts into the YSZ along porous and cracks in the YSZ TBC, although there were some cracks in overlay Al{sub 2}O{sub 3} coating and at the interface between alumina and zirconia formed during hot corrosion tests due to the presence of tensile stress in the alumina coating. In the next reporting period, we will study the mechanisms of cracking of the overlay Al{sub 2}O{sub 3} layer and finish the hot corrosion tests of TBC with Al{sub 2}O{sub 3} coating deposited by high velocity oxy-fuel (HVOF) technique. The hot corrosion test of TBC with EB-PVD deposited Al{sub 2}O{sub 3} coating will be again performed. However before hot corrosion tests, a post-annealing will be carried out in vacuum (residual pressure 10{sup -3} Pa) at 1273K for 1h in order to transform the as-sputtered Al{sub 2}O{sub 3} overlay to crystalline {alpha}-Al{sub 2}O{sub 3} overlay
Recommended from our members
Impermeable Thin Al2O3 Overlay for TBC Protection From Sulfate and Vanadate Attack in Gas Turbines Quarterly Report
In order to improve the hot corrosion resistance of yttria-stabilized zirconia (YSZ), an Al{sub 2}O{sub 3} overlay has been deposited on the surface of YSZ by electron-beam physical vapor deposition. Currently, hot corrosion tests were performed on the YSZ coatings with and without Al{sub 2}O{sub 3} overlay in molten salt mixture (Na{sub 2}SO{sub 4} + 0 {approx} 15wt%V{sub 2}O{sub 5}) at 950 C in order to investigate the effect of amount of vanadate on the hot corrosion behaviors. The results showed that the presence of in V{sub 2}O{sub 5} the molten salt exacerbates the degradation of both the monolithic YSZ coating and the composite YSZ/Al{sub 2}O{sub 3} system. The formation of low-melting Na{sub 2}O-V{sub 2}O{sub 5}-Al{sub 2}O{sub 3} liquid phase is responsible for degradation of the Al{sub 2}O{sub 3} overlay. The Al{sub 2}O{sub 3} overlay acts as a barrier against the infiltration of the molten salt into the YSZ coating during exposure to the molten salt mixture with <5wt% vanadate. In the next reporting period, we will use XPS and SIMS to study the interactions between alumina overlay and molten salt containing vanadate
Nanoscale Origins of the Damage Tolerance of the High-Entropy Alloy CrMnFeCoNi
Damage-tolerance can be an elusive characteristic of structural materials
requiring both high strength and ductility, properties that are often mutually
exclusive. High-entropy alloys are of interest in this regard. Specifically,
the single-phase CrMnFeCoNi alloy displays tensile strength levels of ~1 GPa,
excellent ductility (~60-70%) and exceptional fracture toughness (KJIc > 200
MPa/m). Here, through the use of in-situ straining in an aberration-corrected
transmission electron microscope, we report on the salient atomistic to
micro-scale mechanisms underlying the origin of these properties. We identify a
synergy of multiple deformation mechanisms, rarely achieved in metallic alloys,
which generates high strength, work hardening and ductility, including the easy
motion of Shockley partials, their interactions to form stacking-fault
parallelepipeds, and arrest at planar-slip bands of undissociated dislocations.
We further show that crack propagation is impeded by twinned, nano-scale
bridges that form between the near-tip crack faces and delay fracture by
shielding the crack tip.Comment: 6 figures, 4 figure
Atomistic Conversion Reaction Mechanism of WO3 in Secondary Ion Batteries of Li, Na, and Ca
Intercalation and conversion are two fundamental chemical processes for battery materials in response to ion insertion. The interplay between these two chemical processes has never been directly seen and understood at atomic scale. Here, using in situ HRTEM, we captured the atomistic conversion reaction processes during Li, Na, Ca insertion into a WO3 single crystal model electrode. An intercalation step prior to conversion is explicitly revealed at atomic scale for the first time for Li, Na, Ca. Nanoscale diffraction and ab initio molecular dynamic simulations revealed that after intercalation, the inserted ion–oxygen bond formation destabilizes the transition‐metal framework which gradually shrinks, distorts and finally collapses to an amorphous W and MxO (M=Li, Na, Ca) composite structure. This study provides a full atomistic picture of the transition from intercalation to conversion, which is of essential importance for both secondary ion batteries and electrochromic devices.Das Wechselspiel zwischen Ioneninterkalation und Umwandlung des WO3‐Elektrodenmaterials wurde durch In‐situ‐TEM auf atomarer Ebene untersucht. Die Bildung von Ion‐Sauerstoff‐Bindungen destabilisiert das WO3‐Gerüst: Es schrumpft, wird verzerrt und fällt schließlich zu einer amorphen W‐ und MxO‐Verbundstruktur (M=Li, Na, Ca) zusammen.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/134843/1/ange201601542_am.pdfhttp://deepblue.lib.umich.edu/bitstream/2027.42/134843/2/ange201601542.pdfhttp://deepblue.lib.umich.edu/bitstream/2027.42/134843/3/ange201601542-sup-0001-misc_information.pd
Atomistic Conversion Reaction Mechanism of WO3 in Secondary Ion Batteries of Li, Na, and Ca
Intercalation and conversion are two fundamental chemical processes for battery materials in response to ion insertion. The interplay between these two chemical processes has never been directly seen and understood at atomic scale. Here, using in situ HRTEM, we captured the atomistic conversion reaction processes during Li, Na, Ca insertion into a WO3 single crystal model electrode. An intercalation step prior to conversion is explicitly revealed at atomic scale for the first time for Li, Na, Ca. Nanoscale diffraction and ab initio molecular dynamic simulations revealed that after intercalation, the inserted ion–oxygen bond formation destabilizes the transition‐metal framework which gradually shrinks, distorts and finally collapses to an amorphous W and MxO (M=Li, Na, Ca) composite structure. This study provides a full atomistic picture of the transition from intercalation to conversion, which is of essential importance for both secondary ion batteries and electrochromic devices.The interplay between ion intercalation and WO3 battery electrode conversion was investigated at atomic scale by using in situ HRTEM. The ion–oxygen bond formation destabilizes the WO3 framework which gradually shrinks, distorts and finally collapses to an amorphous W and MxO (M=Li, Na, Ca) composite structure.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/135051/1/anie201601542.pdfhttp://deepblue.lib.umich.edu/bitstream/2027.42/135051/2/anie201601542-sup-0001-misc_information.pdfhttp://deepblue.lib.umich.edu/bitstream/2027.42/135051/3/anie201601542_am.pd
Lithium Fiber Growth on the Anode in a Nanowire Lithium Ion Battery During Charging
Lithium (Li) dendrite formation has been recognized as one of the major safety concerns for Li metal batteries but not for conventional Li ion batteries (LIBs) where Li metal is not used. With the advanced in situ transmission electron microscopy enabling direct observation of battery operation, we found that Li fibers with length up to 35 µm grew on nanowire tip after charging. The Li fibers growth were highly directional, i.e., nucleating from the nanowire tip, and extending along the nanowire axis, which was attributed to the strong electric field enhancement effect induced by the sharp nanowire tip. This study reveals a potential safety concern of short-circuit failure for LIBs using nanowire anodes
Epidemiology, causes, clinical manifestation and diagnosis, prevention and control of coronavirus disease (COVID-19) during the early outbreak period
__Background:__ The coronavirus disease (COVID-19) has been identified as the cause of an outbreak of respiratory illness in Wuhan, Hubei Province, China beginning in December 2019. As of 31 January 2020, this epidemic had spread to 19 countries with 11 791 confirmed cases, including 213 deaths. The World Health Organization has declared it a Public Health Emergency of International Concern.
__Methods:__ A scoping review was conducted following the methodological framework suggested by Arksey and O'Malley. In this scoping review, 65 research articles published before 31 January 2020 were analyzed and discussed to better understand the epidemiology, causes, clinical diagnosis, prevention and control of this virus. The research domains, dates of publication, journal language, authors' affiliations, and methodological characteristics were included in the analysis. All the findings and statements in this review regarding the outbreak are based on published information as listed in the references.
__Results:__ Most of the publications were written using the English language (89.2%). The largest proportion of published articles were related to causes (38.5%) and a majority (67.7%) were published by Chinese scholars. Research articles initially focused on causes, but over time there was an increase of the articles related to prevention and control. Studies thus far have shown that the virus' origination is in connection to a seafood market in Wuhan, but specific animal associations have not been confirmed. Reported symptoms include fever, cough, fatigue, pneumonia, headache, diarrhea, hemoptysis, and dyspnea. Preventive measures such as masks, hand hygiene practices, avoidance of public contact, case detection, contact tracing, and quarantines have been discussed as
Ecologically Appropriate Xenobiotics Induce Cytochrome P450s in Apis mellifera
BACKGROUND: Honey bees are exposed to phytochemicals through the nectar, pollen and propolis consumed to sustain the colony. They may also encounter mycotoxins produced by Aspergillus fungi infesting pollen in beebread. Moreover, bees are exposed to agricultural pesticides, particularly in-hive acaricides used against the parasite Varroa destructor. They cope with these and other xenobiotics primarily through enzymatic detoxificative processes, but the regulation of detoxificative enzymes in honey bees remains largely unexplored. METHODOLOGY/PRINCIPAL FINDINGS: We used several approaches to ascertain effects of dietary toxins on bee susceptibility to synthetic and natural xenobiotics, including the acaricide tau-fluvalinate, the agricultural pesticide imidacloprid, and the naturally occurring mycotoxin aflatoxin. We administered potential inducers of cytochrome P450 enzymes, the principal biochemical system for Phase 1 detoxification in insects, to investigate how detoxification is regulated. The drug phenobarbital induces P450s in many insects, yet feeding bees with phenobarbital had no effect on the toxicity of tau-fluvalinate, a pesticide known to be detoxified by bee P450s. Similarly, no P450 induction, as measured by tau-fluvalinate tolerance, occurred in bees fed xanthotoxin, salicylic acid, or indole-3-carbinol, all of which induce P450s in other insects. Only quercetin, a common pollen and honey constituent, reduced tau-fluvalinate toxicity. In microarray comparisons no change in detoxificative gene expression was detected in phenobarbital-treated bees. However, northern blot analyses of guts of bees fed extracts of honey, pollen and propolis showed elevated expression of three CYP6AS P450 genes. Diet did not influence tau-fluvalinate or imidacloprid toxicity in bioassays; however, aflatoxin toxicity was higher in bees consuming sucrose or high-fructose corn syrup than in bees consuming honey. CONCLUSIONS/SIGNIFICANCE: These results suggest that regulation of honey bee P450s is tuned to chemicals occurring naturally in the hive environment and that, in terms of toxicological capacity, a diet of sugar is not equivalent to a diet of honey
- …