240 research outputs found

    Subjective perceptions as prognostic factors of time to fitness for work during a 4-year period after inpatient rehabilitation for orthopaedic trauma.

    Get PDF
    INTRODUCTION: Time to fitness for work (TFW) was measured as the number of days that were paid as compensation for work disability during the 4 years after discharge from the rehabilitation clinic in a population of patients hospitalised for rehabilitation after orthopaedic trauma. The aim of this study was to test whether some psychological variables can be used as potential early prognostic factors of TFW. MATERIAL AND METHODS: A Cox proportional hazards model was used to estimate the associations between predictive variables and TFW. Predictors were global health, pain at hospitalisation and pain decrease during the stay (all continuous and standardised by subtracting the mean and dividing by two standard deviations), perceived severity of the trauma and expectation of a positive evolution (both binary variables). RESULTS: Full data were available for 807 inpatients (660 men, 147 women). TFW was positively associated with better perceived health (hazard ratio [HR] 1.16, 95% confidence interval [CI] 1.13-1.19), pain decrease (HR 1.46, 95% CI 1.30-1.64) and expectation of a positive evolution (HR 1.50, 95% CI 1.32-1.70) and negatively associated with pain at hospitalisation (HR 0.67, 95% CI 0.59-0.76) and high perceived severity (HR 0.72, 95% CI 0.61-0.85). DISCUSSION: The present results provide some evidence that work disability during a four-year period after rehabilitation may be predicted by prerehabilitation perceptions of general health, pain, injury severity, as well as positive expectation of evolution

    Flow-duration curve integration into digital filtering algorithms for simulating climate variability based on river baseflow

    Get PDF
    A baseflow separation methodology combining the outcomes of the flow–duration curve and the digital filtering algorithms to cope with the restrictions of the traditional procedures has been assessed. Using this methodology as well as the monitored and simulated hydro-climatologic data, the baseflow annual variations due to climate change and human-induced activities were determined. The outcomes show that the long-term baseflow index at the upstream sub-basin is nearly half of that at the downstream from October to April, whereas, they are close to each other for the remaining months. Some of the groundwater reacts to precipitation and an evident rise in the groundwater contribution has been detected for the hydrological years 1998–2001 and 2006–2008. The contrary has been recorded for 1987. The water released from the reservoir in the dry periods lead to distinctions in the detected baseflow index between the pre-damming and post-damming periods of the river

    On the Propagation of Slip Fronts at Frictional Interfaces

    Get PDF
    The dynamic initiation of sliding at planar interfaces between deformable and rigid solids is studied with particular focus on the speed of the slip front. Recent experimental results showed a close relation between this speed and the local ratio of shear to normal stress measured before slip occurs (static stress ratio). Using a two-dimensional finite element model, we demonstrate, however, that fronts propagating in different directions do not have the same dynamics under similar stress conditions. A lack of correlation is also observed between accelerating and decelerating slip fronts. These effects cannot be entirely associated with static local stresses but call for a dynamic description. Considering a dynamic stress ratio (measured in front of the slip tip) instead of a static one reduces the above-mentioned inconsistencies. However, the effects of the direction and acceleration are still present. To overcome this we propose an energetic criterion that uniquely associates, independently on the direction of propagation and its acceleration, the slip front velocity with the relative rise of the energy density at the slip tip.Comment: 15 pages, 6 figure

    One-dimensional array of ion chains coupled to an optical cavity

    Get PDF
    We present a novel system where an optical cavity is integrated with a microfabricated planar-electrode ion trap. The trap electrodes produce a tunable periodic potential allowing the trapping of up to 50 separate ion chains aligned with the cavity and spaced by 160 μm in a one-dimensional array along the cavity axis. Each chain can contain up to 20 individually addressable Yb+ ions coupled to the cavity mode. We demonstrate deterministic distribution of ions between the sites of the electrostatic periodic potential and control of the ion–cavity coupling. The measured strength of this coupling should allow access to the strong collective coupling regime with lesssim10 ions. The optical cavity could serve as a quantum information bus between ions or be used to generate a strong wavelength-scale periodic optical potential.United States. Army Research OfficeNational Science Foundation (U.S.)National Science Foundation (U.S.). Graduate Research Fellowship Program (0645960)National Science Foundation (U.S.) (Interdisciplinary Quantum Information Science and Engineering (iQuISE) Program 0801525

    Optical nanofibers and spectroscopy

    Full text link
    We review our recent progress in the production and characterization of tapered optical fibers with a sub-wavelength diameter waist. Such fibers exhibit a pronounced evanescent field and are therefore a useful tool for highly sensitive evanescent wave spectroscopy of adsorbates on the fiber waist or of the medium surrounding. We use a carefully designed flame pulling process that allows us to realize preset fiber diameter profiles. In order to determine the waist diameter and to verify the fiber profile, we employ scanning electron microscope measurements and a novel accurate in situ optical method based on harmonic generation. We use our fibers for linear and non-linear absorption and fluorescence spectroscopy of surface-adsorbed organic molecules and investigate their agglomeration dynamics. Furthermore, we apply our spectroscopic method to quantum dots on the surface of the fiber waist and to caesium vapor surrounding the fiber. Finally, towards dispersive measurements, we present our first results on building and testing a single-fiber bi-modal interferometer.Comment: 13 pages, 18 figures. Accepted for publication in Applied Physics B. Changes according to referee suggestions: changed title, clarification of some points in the text, added references, replacement of Figure 13

    1D model of precursors to frictional stick-slip motion allowing for robust comparison with experiments

    Full text link
    We study the dynamic behaviour of 1D spring-block models of friction when the external loading is applied from a side, and not on all blocks like in the classical Burridge-Knopoff-like models. Such a change in the loading yields specific difficulties, both from numerical and physical viewpoints. To address some of these difficulties and clarify the precise role of a series of model parameters, we start with the minimalistic model by Maegawa et al. (Tribol. Lett. 38, 313, 2010) which was proposed to reproduce their experiments about precursors to frictional sliding in the stick-slip regime. By successively adding (i) an internal viscosity, (ii) an interfacial stiffness and (iii) an initial tangential force distribution at the interface, we manage to (i) avoid the model's unphysical stress fluctuations, (ii) avoid its unphysical dependence on the spatial resolution and (iii) improve its agreement with the experimental results, respectively. Based on the behaviour of this improved 1D model, we develop an analytical prediction for the length of precursors as a function of the applied tangential load. We also discuss the relationship between the microscopic and macroscopic friction coefficients in the model.Comment: 13 pages, 14 figures, accepted in Tribology Letter

    Limits on Fast Radio Burst-like Counterparts to Gamma-Ray Bursts Using CHIME/FRB

    Get PDF
    Fast radio bursts (FRBs) are a class of highly energetic, mostly extragalactic radio transients lasting for ∼milliseconds. While over 600 FRBs have been published so far, their origins are presently unclear, with some theories for extragalactic FRBs predicting accompanying high-energy emission. In this work, we use the Canadian Hydrogen Intensity Mapping Experiment (CHIME) Fast Radio Burst (CHIME/FRB) Project to explore whether any FRB-like radio emission coincides in space and time with 81 gamma-ray bursts (GRBs) detected between 2018 July 17 and 2019 July 8 by Swift/BAT and Fermi/GBM. We do not find any statistically significant coincident pairs within 3σ of each other's spatial localization regions and within a time difference of up to one week. In addition to searching for spatial matches between known FRBs and known GRBs, we use CHIME/FRB to constrain FRB-like (∼1-10 ms) radio emission before, at the time of, or after the reported high-energy emission at the position of 39 GRBs. For short gamma-ray bursts (SGRBs), we constrain the radio flux in the 400--800 MHz band to be under a few kJy for ∼5.5-12.5 hr post-high-energy burst. We use these limits to constrain models that predict FRB-like prompt radio emission after SGRBs. For long gamma-ray bursts, we constrain the radio flux to be under a few kJy from ∼6 hr pre-high-energy burst to ∼12 hr post-high-energy burst

    Long-term follow-up of chronic central serous chorioretinopathy after successful treatment with photodynamic therapy or micropulse laser

    Get PDF
    Purpose To describe the treatment outcomes and recurrence risk of chronic central serous chorioretinopathy (cCSC) in patients who had complete resolution of subretinal fluid (SRF) after either primary half-dose photodynamic therapy (PDT) or high-density subthreshold micropulse laser (HSML) in the PLACE trial.Methods This multicentre prospective follow-up study evaluated cCSC patients at 1 year after completion of the PLACE trial. Outcomes included: complete resolution of SRF on OCT, best-corrected visual acuity (BCVA) in Early Treatment of Diabetic Retinopathy Study (ETDRS) letters, retinal sensitivity on microperimetry and a visual function questionnaire (NEI-VFQ25).Results Twenty-nine out of 37 patients who received half-dose PDT and 15 out of 17 patients who received HSML could be evaluated at final visit. At final visit, 93% of the patients treated with half-dose PDT had complete resolution of SRF, compared with 53% of HSML-treated patients (p = 0.006). At final visit, the mean estimate increase in the PDT group compared with the HSML group was + 2.1 ETDRS letters, +0.15 dB for the retinal sensitivity and + 5.1 NEI-VFQ25 points (p = 0.103, p = 0.784 and p = 0.071, respectively). The mean estimated central retinal thickness in the half-dose PDT group was -7.0 mu m compared with the HSML group (p = 0.566). The mean estimated subfoveal choroidal thickness in the half-dose PDT group was -16.6 mu m compared with the HSML group (p = 0.359).Conclusion At 20 months after treatment, cCSC patients successfully treated with half-dose PDT are less likely to have recurrences of SRF compared with those successfully treated with HSML. However, functional outcomes did not differ.Development and application of statistical models for medical scientific researc
    corecore