Low Temperature Precursor Route for Highly Efficient Spherically Shaped LED-Phosphors M2Si5N8:Eu2+ (M = Eu, Sr, Ba)

The highly efficient nitridosilicate phosphors M2Si5N8 (M = Sr, Ba, Eu) for phosphor-converted pc-LEDs were synthesized at low temperatures using a novel precursor route involving metal amides M(NH2)2. These precursors have been synthesized by dissolution of the respective metals in supercritical ammonia at 150°C and 300 bar. The thermal behavior and decomposition process of the amides were investigated with temperature programmed powder X-ray diffractometry and thermoanalytical measurements (DTA/TG). These investigations rendered the amides as suitable intermediates for reaction with silicon diimide (Si(NH)2). Thus, the desired nitridosilicate phosphors were obtained at relatively low temperatures around 1150−1400°C which is approximately 300°C lower compared to common synthetic approaches starting from metals or oxides. The influence of the thermal treatment on the phosphor morphology has been studied extensively. The accessibility of spherical phosphor particles represents another striking feature of this route since it improves light extraction from the crystallites due to decreasing light guiding and decreasing re-absorption inside the phosphor particle. The synthesized luminescent materials M2Si5N8:Eu2+ (M = Sr, Ba) exhibit quantum efficiencies and emission band widths (FWHM 70−90 nm) comparable to standard phosphor powders. Employment of Eu(NH2)2 as dopant reagent for synthesis of Ba2Si5N8:Eu2+ proved favorable for the formation of spherical crystallites compared to doping with Eu metal, halides, or oxide

High-pressure phases and transitions of the layered alkaline earth nitridosilicates SrSiN2 and BaSiN2

We investigate the high-pressure phase diagram of SrSiN2 and BaSiN2 with density-functional calculation. Searching a manifold of possible candidate structures, we propose new structural modifications of SrSiN2 and BaSiN2 attainable in high-pressure experiments. The monoclinic ground state of SrSiN2 transforms at 3 GPa into an orthorhombic BaSiN2 type. At 14 GPa a CaSiN2-type structure becomes the most stable configuration of SrSiN2. A hitherto unknown Pbcm modification is adopted at 85 GPa and, finally, at 131 GPa a LiFeO2-type structure. The higher homologue BaSiN2 transforms to a CaSiN2 type at 41 GPa and further to a Pbcm modification at 105 GPa. Both systems follow the pressure-coordination rule: the coordination environment of Si increases from tetrahedral through trigonal bipyramidal to octahedral. Some high-pressure phases are related in structure through simple group–subgroup mechanisms, indicating displacive phase transformations with low activation barriers

Ba3Ga3N5 - A Novel Host Lattice for Eu2+ - Doped Luminescent Materials with Unexpected Nitridogallate Substructure

The alkaline earth nitridogallate Ba3Ga3N5 was synthesized from the elements in a sodium flux at 760°C utilizing weld shut tantalum ampules. The crystal structure was solved and refined on the basis of single-crystal X-ray diffraction data. Ba3Ga3N5 (space group C2/c (No. 15), a = 16.801(3), b = 8.3301(2), c = 11.623(2) Å, β = 109.92 (3)°, Z = 8) contains a hitherto unknown structural motif in nitridogallates, namely, infinite strands made up of GaN4 tetrahedra, each sharing two edges and at least one corner with neighboring GaN4 units. There are three Ba2+ sites with coordination numbers six or eight, respectively, and one Ba2+ position exhibiting a low coordination number 4 corresponding to a distorted tetrahedron. Eu2+ - doped samples show red luminescence when excited by UV irradiation at room temperature. Luminescence investigations revealed a maximum emission intensity at 638 nm (FWHM =2123 cm−1). Ba3Ga3N5 is the first nitridogallate for which parity allowed broadband emission due to Eu2+ - doping has been found. The electronic structure of both Ba3Ga3N5 as well as isoelectronic but not isostructural Sr3Ga3N5 was investigated by DFT methods. The calculations revealed a band gap of 1.53 eV for Sr3Ga3N5 and 1.46 eV for Ba3Ga3N5

Li14Ln5[Si11N19O5]O2F2 with Ln = Ce, Nd-Representatives of a Family of Potential Lithium Ion Conductors

The isotypic layered oxonitridosilicates Li14Ln5[Si11N19O5]O2F2 (Ln = Ce, Nd) have been synthesized using Li as fluxing agent and crystallize in the orthorhombic space group Pmmn (Z = 2, Li14Ce5[Si11N19O5]O2F2: a = 17.178(3), b = 7.6500(15), c = 10.116(2) Å, R1 = 0.0409, wR2 = 0.0896; Li14Nd5 Si11N19O5]O2F2: a = 17.126(2), b = 7.6155 15), c = 10.123(2) Å, R1 = 0.0419, wR2 = 0.0929). The silicate layers consist of dreier and sechser rings interconnected via common corners, yielding an unprecedented silicate substructure. A topostructural analysis indicates possible 1D ion migration pathways between five crystallographic independent Li positions. The specific Li-ionic conductivity and its temperature dependence were determined by impedance spectroscopy as well as DC polarization/depolarization measurements. The ionic conductivity is on the order of 5 × 10−5 S/cm at 300°C, while the activation energy is 0.69 eV. Further adjustments of the defect chemistry (e.g., through doping)can make these compounds interesting candidates for novel oxonitridosilicate based ion conductors

Synthesis of Alkaline Earth Diazenides MAEN2 (MAE = Ca, Sr, Ba) by Controlled Thermal Decomposition of Azides under High Pressure

The alkaline earth diazenides MAEN2 with MAE = Ca, Sr and Ba were synthesized by a novel synthetic approach, namely, a controlled decomposition of the corresponding azides in a multianvil press at highpressure/ high-temperature conditions. The crystal structure of hitherto unknown calcium diazenide (space group I4/mmm (no. 139), a = 3.5747(6) Å, c = 5.9844(9) Å, Z = 2, wRp = 0.078) was solved and refined on the basis of powder X-ray diffraction data as well as that of SrN2 and BaN2. Accordingly, CaN2 is isotypic with SrN2 (space group I4/mmm (no. 139), a = 3.8054(2) Å, c = 6.8961(4) Å, Z = 2, wRp = 0.057) and the corresponding alkaline earth acetylenides (MAEC2) crystallizing in a tetragonally distorted NaCl structure type. In accordance with literature data, BaN2 adopts a more distorted structure in space group C2/c (no. 15) with a = 7.1608(4) Å, b = 4.3776(3) Å, c = 7.2188(4) Å, β = 104.9679(33)°, Z = 4 and wRp = 0.049). The N−N bond lengths of 1.202(4) Å in CaN2 (SrN2 1.239(4) Å, BaN2 1.23(2) Å) correspond well with a double-bonded dinitrogen unit confirming a diazenide ion [N2]2−. Temperature-dependent in situ powder X-ray diffractometry of the three alkaline earth diazenides resulted in formation of the corresponding subnitrides MAE2N (MAE = Ca, Sr, Ba) at higher temperatures. FTIR spectroscopy revealed a band at about 1380 cm−1 assigned to the N−N stretching vibration of the diazenide unit. Electronic structure calculations support the metallic character of alkaline earth diazenides