4,093 research outputs found
Ba2AlSi5N9
Ba2AlSi5N9 was synthesized starting from Si3N4, AlN, and Ba in a radio-frequency furnace at temperatures of about 1725°C. The new nitridoalumosilicate crystallizes in the triclinic space group P1 (no. 1), a=9.860(1) Å, b=10.320(1) Å, c=10.346(1) Å, α=90.37(2)°, β=118.43(2)°; γ=103.69(2)°, Z=4, R1=0.0314. All synthesized crystals were characteristically twinned by reticular pseudomerohedry with twin law (1 0 0, −0.5 −1 0, −1 0 −1). The crystal structure of Ba2AlSi5N9 was determined from single-crystal X-ray diffraction data of a twinned crystal and confirmed by Rietveld refinement both on X-ray and on neutron powder diffraction data. Statistical distribution Si/Al is corroborated by lattice energy calculations (MAPLE). 29Si and 27Al solid-state NMR are in accordance with the crystallographic results. Ba2AlSi5N9 represents a new type of network structure made up of TN4 tetrahedra (T = Si, Al). Highly condensed layers of dreier rings with nitrogen connecting three neighboring tetrahedral centers occur which are further crosslinked by dreier rings and vierer rings. The dreier rings consist of corner-sharing tetrahedra, whereas some of the vierer rings exhibit two pairs of edge-sharing tetrahedra. In the resulting voids of the network there are eight different Ba2+ sites with coordination numbers between 6 and 10. Thermogravimetric investigations confirmed a thermal stability of Ba2AlSi5N9 up to about 1515°C (He atmosphere). Luminescence measurements on Ba2AlSi5N9:Eu2+ (2 mol % Eu2+) with an excitation wavelength of 450 nm revealed a broadband emission peaking at 584 nm (FWHM=100 nm) originating from dipole-allowed 4f6(7F)5d1 → 4f7(8S7/2) transitions
Focusing a deterministic single-ion beam
We focus down an ion beam consisting of single 40Ca+ ions to a spot size of a
few mum using an einzel-lens. Starting from a segmented linear Paul trap, we
have implemented a procedure which allows us to deterministically load a
predetermined number of ions by using the potential shaping capabilities of our
segmented ion trap. For single-ion loading, an efficiency of 96.7(7)% has been
achieved. These ions are then deterministically extracted out of the trap and
focused down to a 1sigma-spot radius of (4.6 \pm 1.3)mum at a distance of 257mm
from the trap center. Compared to former measurements without ion optics, the
einzel-lens is focusing down the single-ion beam by a factor of 12. Due to the
small beam divergence and narrow velocity distribution of our ion source,
chromatic and spherical aberration at the einzel-lens is vastly reduced,
presenting a promising starting point for focusing single ions on their way to
a substrate.Comment: 16 pages, 7 figure
The history of a quiet-Sun magnetic element revealed by IMaX/SUNRISE
Isolated flux tubes are considered to be fundamental magnetic building blocks
of the solar photosphere. Their formation is usually attributed to the
concentration of magnetic field to kG strengths by the convective collapse
mechanism. However, the small size of the magnetic elements in quiet-Sun areas
has prevented this scenario from being studied in fully resolved structures.
Here we report on the formation and subsequent evolution of one such
photospheric magnetic flux tube, observed in the quiet Sun with unprecedented
spatial resolution (0\farcs 15 - 0\farcs 18) and high temporal cadence (33 s).
The observations were acquired by the Imaging Magnetograph Experiment (IMaX)
aboard the \textsc{Sunrise} balloon-borne solar observatory. The equipartition
field strength magnetic element is the result of the merging of several same
polarity magnetic flux patches, including a footpoint of a previously emerged
loop. The magnetic structure is then further intensified to kG field strengths
by convective collapse. The fine structure found within the flux concentration
reveals that the scenario is more complex than can be described by a thin flux
tube model with bright points and downflow plumes being established near the
edges of the kG magnetic feature. We also observe a daisy-like alignment of
surrounding granules and a long-lived inflow towards the magnetic feature.
After a subsequent weakening process, the field is again intensified to kG
strengths. The area of the magnetic feature is seen to change in anti-phase
with the field strength, while the brightness of the bright points and the
speed of the downflows varies in phase. We also find a relation between the
brightness of the bright point and the presence of upflows within it.Comment: 13 pages. Accepted in ApJ. Animation 1 can be viewed and downloaded
from: http://spg.iaa.es/downloads.as
NGC 346 in the Small Magellanic Cloud. III. Recent Star Formation and Stellar Clustering Properties in the Bright HII Region N 66
In the third part of our photometric study of the star-forming region NGC
346/N~66 and its surrounding field in the Small Magellanic Cloud (SMC), we
focus on the large number of low-mass pre-main sequence (PMS) stars revealed by
the Hubble Space Telescope Observations with the Advanced Camera for Surveys.
We investigate the origin of the observed broadening of the pre-main sequence
population in the , CMD. The most likely explanations are either the
presence of differential reddening or an age spread among the young stars.
Assuming the latter, simulations indicate that we cannot exclude the
possibility that stars in NGC 346 might have formed in two distinct events
occurring about 10 and 5 Myr ago, respectively. We find that the PMS stars are
not homogeneously distributed across NGC 346, but instead are grouped in at
least five different clusters. On spatial scales from 0.8 to 8 (0.24 to
2.4 pc at the distance of the SMC) the clustering of the PMS stars as computed
by a two-point angular correlation function is self-similar with a power law
slope . The clustering properties are quite similar to
Milky Way star forming regions like Orion OB or Oph. Thus molecular
cloud fragmentation in the SMC seems to proceed on the same spatial scales as
in the Milky Way. This is remarkable given the differences in metallicity and
hence dust content between SMC and Milky Way star forming regions.Comment: Accepted for publication in ApJ. 16 pages, 13 (low-resolution)
figures, emulateapj.cls LaTeX styl
Natural extensions and entropy of -continued fractions
We construct a natural extension for each of Nakada's -continued
fractions and show the continuity as a function of of both the entropy
and the measure of the natural extension domain with respect to the density
function . In particular, we show that, for all , the product of the entropy with the measure of the domain equals .
As a key step, we give the explicit relationship between the -expansion
of and of
Grain Structure Evolution of Al−Cu Alloys in Powder Bed Fusion with Laser Beam for Excellent Mechanical Properties
Powder Bed Fusion with Laser Beam of Metals (PBF-LB/M) is one of the fastest growing technology branches. More and more metallic alloys are being qualified, but processing of aluminum wrought alloys without cracks and defects is still challenging. It has already been shown that small parts with low residual porosity can be produced. However, suffering from microscopic hot cracks, the fracture behavior has been rather brittle. In this paper different combinations of temperature gradients and solidification rates are used to achieve specific solidification conditions in order to influence the resulting microstructure, as well as internal stresses. By this approach it could be shown that EN AW-2024, an aluminum-copper wrought alloy, is processable via PBF-LB/M fully dense and crack-free with outstanding material properties, exceeding those reported for commonly manufactured EN AW-2024 after T4 heat treatment
Reliability Exercise for the Polymyalgia Rheumatica Classification Criteria Study: The Oranjewoud Ultrasound Substudy
Objective. A study supported by the EULAR and the ACR being conducted to establish classification criteria for polymyalgia rheumatica (PMR) will include ultrasound examination of the shoulders and hips. Ultrasound (US) depicts glenohumeral joint effusion, biceps tenosynovitis, subdeltoid bursitis, hip joint synovitis, and trochanteric bursitis in PMR. These findings may aid in distinguishing PMR from other diseases. The purpose of this study was to assess standards and US interreader agreement of participants in the PMR classification criteria study.
Methods. Sixteen physicians in four groups examined shoulders and hips of 4 patients and 4 healthy adults with ultrasound. Overall agreement and interobserver agreement were calculated. Results. The overall agreement (OA) between groups was 87%. The OA for healthy shoulders was 88.8%, for healthy hips 100%, for shoulders with pathology 85.2%, and 74.3% for hips with pathology, respectively. Conclusion. There was a high degree of agreement found for the examination of healthy shoulders and pathologic hips. Agreement was moderate for pathologic shoulders and perfect for healthy hips. US of shoulder and hips performed by different examiners is a reliable and feasible tool for assessment of PMR related disease pathology and can be incorporated into a classification criteria study
Dark-field X-ray microscopy for multiscale structural characterization
Many physical and mechanical properties of crystalline materials depend strongly on their internal structure, which is typically organized into grains and domains on several length scales. Here we present dark-field X-ray microscopy; a non-destructive microscopy technique for the three-dimensional mapping of orientations and stresses on lengths scales from 100 nm to 1 mm within embedded sampling volumes. The technique, which allows ‘zooming’ in and out in both direct and angular space, is demonstrated by an annealing study of plastically deformed aluminium. Facilitating the direct study of the interactions between crystalline elements is a key step towards the formulation and validation of multiscale models that account for the entire heterogeneity of a material. Furthermore, dark-field X-ray microscopy is well suited to applied topics, where the structural evolution of internal nanoscale elements (for example, positioned at interfaces) is crucial to the performance and lifetime of macro-scale devices and components thereof
Evidence of mild founder LMOD3 mutations causing nemaline myopathy 10 in Germany and Austria
Objective To expand the clinical and genetic spectrum of nemaline myopathy 10 by a series of Austrian and German patients with a milder disease course and missense mutations in LMOD3. Methods We characterized the clinical features and the genetic status of 4 unrelated adolescent or adult patients with nemaline myopathy. Results The 4 patients showed a relatively mild disease course. They all have survived into adulthood, 3 of 4 have remained ambulatory, and all showed marked facial weakness. Muscle biopsy specimens gave evidence of nemaline bodies. All patients were unrelated but originated from Austria (Tyrol and Upper Austria) and Southern Germany (Bavaria). All patients carried the missense variant c.1648C>T, p.(Leu550Phe) in the LMOD3 gene, either on both alleles or in trans with another missense variant (c.1004A>G, p.Gln335Arg). Both variants were not reported previously. Conclusions In 2014, a severe form of congenital nemaline myopathy caused by disrupting mutations in LMOD3 was identified and denoted as NEM10. Unlike the previously reported patients, who had a severe clinical picture with a substantial risk of early death, our patients showed a relatively mild disease course. As the missense variant c.1648C>T is located further downstream compared to all previously published LMOD3 mutations, it might be associated with higher protein expression compared to the reported loss-of-function mutations. The apparent clusters of 2 mild mutations in Germany and Austria in 4 unrelated families may be explained by a founder effect
- …