Synchrotron Tomography for the Study of Void Formation in Internal Tin Nb3_{3}Sn Superconductors

Synchrotron absorption tomography has been applied for the study of voids formed during the thermal treatment of internal tin Nb$_{3}$Sn strands. Possible void formation mechanisms and in particular the effect of Sn phase transformations and melting are discussed based on a quantitative void description. Sn melting changes mainly the shape and volume of the individual voids but does not increase the total void volume in the strand

Is cell-mediated immunity related to the evolution of life-history strategies in birds?

According to life-history theory, the development of immune function should be balanced through evolutionary optimization of the allocation of resources to reproduction and through mechanisms that promote survival. We investigated interspecific variability in cell-mediated immune response (CMI), as measured by the phytohaemagglutinin (PHA) assay, in relation to clutch size, longevity and other life-history traits in 50 species of birds. CMI exhibited significant repeatability within species, and PHA responses in chicks were consistently stronger than in adults. Univariate tests showed a variety of significant relationships between the CMI of both chicks and adults with respect to size, development period and lifespan, but not clutch size or prevalence of blood parasites in adults. Multivariate analyses confirmed these patterns but independent variables were too highly correlated to isolate unique influences on CMI. The positive relationship of chick CMI to nestling period is further complicated by a parallel relationship of chick CMI to the age at testing. However, multivariate analysis showed that chick CMI varies uniquely with length of the nestling period. Adult CMI was associated with a strong life-history axis of body size, development rate and longevity. Therefore, adult CMI may be associated with prevention and repair mechanisms related to long lifespan, but it also may be allometrically related to body size through other pathways. Neither chick CMI nor adult CMI was related to clutch size, contradicting previous results linking parasite-related mortality to CMI and the evolution of clutch size (reproductive investment) in birds.Peer Reviewe

On the formation of voids in internal tin Nb3_{3}Sn superconductors

In this article we describe three void growth mechanisms in Nb$_{3}$Sn strands of the internal tin design on the basis of combined synchrotron micro-tomography and x-ray diffraction measurements during in-situ heating cycles. Initially void growth is driven by a reduction of void surface area by void agglomeration. The main void volume increase is caused by density changes during the formation of Cu3Sn in the strand. Subsequent transformation of Cu-Sn intermetallics into the lower density a-bronze reduces the void volume again. Long lasting temperature ramps and isothermal holding steps can neither reduce the void volume nor improve the chemical strand homogeneity prior to the superconducting A15 phase nucleation and growth

Lowering the activation temperature of TiZrV non-evaporable getter films

In order to reduce the activation temperature of the TiZrV alloy, thin films of various compositions were produced by three-cathode magnetron sputtering on stainless steel substrates. For the characterisation of the activation behaviour the surface chemical composition has been monitored by Auger Electron Spectroscopy (AES) during specific in situ thermal cycles. The volume elemental composition of the film has been measured by Energy Dispersive X-ray spectroscopy (EDX) and the morphology (crystal structure and size of the crystallites) has been investigated by X-ray diffraction (XRD). The criteria indicating the sample quality and its dependence on film structure and chemical composition are presented and discussed

Evidence for length-dependent wire expansion, filament dedensification and consequent degradation of critical current density in Ag-alloy sheathed Bi-2212 wires

It is well known that longer Bi-2212 conductors have significantly lower critical current density (Jc) than shorter ones, and recently it has become clear that a major cause of this reduction is internal gas pressure generated during heat treatment, which expands the wire diameter and dedensifies the Bi-2212 filaments. Here we report on the length-dependent expansion of 5 to 240 cm lengths of state-of-the-art, commercial Ag alloy-sheathed Bi-2212 wire after full and some partial heat treatments. Detailed image analysis along the wire length shows that the wire diameter increases with distance from the ends, longer samples often showing evident damage and leaks provoked by the internal gas pressure. Comparison of heat treatments carried out just below the melting point and with the usual melt process makes it clear that melting is crucial to developing high internal pressure. The decay of Jc away from the ends is directly correlated to the local wire diameter increase, which decreases the local Bi-2212 filament mass density and lowers Jc, often by well over 50%. It is clear that control of the internal gas pressure is crucial to attaining the full Jc of these very promising round wires and that the very variable properties of Bi-2212 wires are due to the fact that this internal gas pressure has so far not been well controlled

Aluminum strand coating for increasing the interstrand contact resistance in Rutherford type superconducting cables

The interstrand contact resistance (Rc) in Rutherford type cables for fast cycling superconducting magnets must be sufficiently high in order to limit eddy current losses. The required value for Rc depends on the cable and magnet geometries and on the foreseen cycling rate, but is typically of the order of one mW. Such values can be reached with a dedicated strand coating or with a resistive internal cable barrier. As a possible candidate Al strand coatings have been tested. For a Rutherford type inner conductor cable of the Large Hadron Collider (LHC) made of Al coated strands Rc values higher than 500 Omega are achieved. The native Al2O3 oxide layer formed at ambient temperature in air is sufficient to reach this high contact resistance. A 6 h-200 °C oxidation heat treatment in air with 100% relative humidity further increases Rc to values above 600 μOmega . Due to the high thermal and mechanical stability of Al2O3 only a relatively moderate Rc drop of about 40 % is obtained during a 190 °C heat treatment under 50 MPa pressure (the so-called curing cycle of the coil insulation) subsequent to the 6 h-200 °C oxidation heat treatment

Reduction of gas bubbles and improved critical current density in Bi-2212 round wire by swaging

Bi-2212 round wire is made by the powder-in-tube technique. An unavoidable property of powder-in-tube conductors is that there is about 30% void space in the as-drawn wire. We have recently shown that the gas present in the as-drawn Bi-2212 wire agglomerates into large bubbles and that they are presently the most deleterious current limiting mechanism. By densifying short 2212 wires before reaction through cold isostatic pressing (CIPping), the void space was almost removed and the gas bubble density was reduced significantly, resulting in a doubled engineering critical current density (JE) of 810 A/mm2 at 5 T, 4.2 K. Here we report on densifying Bi-2212 wire by swaging, which increased JE (4.2 K, 5 T) from 486 A/mm2 for as-drawn wire to 808 A/mm2 for swaged wire. This result further confirms that enhancing the filament packing density is of great importance for making major JE improvement in this round-wire magnet conductor.Comment: To be published in IEEE Transactions on Applied Superconductivity, 23, xxxxxx (2013

Influence of the elemental composition and crystal structure on the vacuum properties of Ti-Zr-V non-evaporable getter films

Non-evaporable thin film getters based on the elements of the 4th and 5th columns of the periodic table have been deposited by sputtering. Among the about 20 alloys studied to date, the lowest activation temperature (about 180 °C for a 24-hour heating) has been found for the Ti-Zr-V system in a well-defined composition range. The characterization of the activation behavior of such Ti-Zr-V films is presented. The evolution of the surface chemical composition during activation is monitored by Auger Electron Spectroscopy (AES) and the functional properties are evaluated by pumping speed measurements. The pumping speed characteristics are quite similar to those already measured for commercially available NEG materials, except for the much lower saturation coverage for CO. This inconvenience, which is due to the smooth surface structure of these films, can be counteracted by increasing the roughness of the substrate

Temperature Induced Degradation of Nb Ti/Cu Composite Superconductors

The degradation mechanisms of state-of-the-art Nb-Ti/Cu superconductors are described, based on in-situ synchrotron X-ray diffraction measurements during heat treatment. A quantitative description of the Nb-Ti/Cu degradation in terms of critical current density, Cu stabiliser resistivity and mechanical composite strength is presented. In an applied magnetic field a significant critical current degradation is already observed after a 5-minute 400 °C heat treatment, due to variations of a-Ti precipitate size and distribution within the Nb-Ti alloy filaments. A strong degradation of the strand mechanical properties is observed after several minutes heating above 550 °C, which is also the temperature at which the formation of Cu Ti intermetallic phases is detected. Several minutes heating at 250 °C are sufficient to increase the RRR of the strongly cold work strands inside a Rutherford type cable from about 80 to about 240. Heating for several minutes at 400 °C does not cause a significant conductor degradation in self-field and, thus, leaves enough temperature margin for the electrical interconnection of Nb-Ti/Cu conductors with common low temperature solders

Phase Transformations during the Reaction Heat Treatment

The evolution of Nb containing phases during the diffusion heat treatment of three different high critical current Nb$_{3}$Sn strand types is compared, based on synchrotron X-ray diffraction results that have been obtained at the ID15 beam line of the European Synchrotron Radiation Facility (ESRF). In all strands studied, Nb$_{3}$Sn formation is preceded by the formation of a Cu-Nb-Sn ternary phase, NbSn2 and Nb6Sn5. As compared to the PIT and Tube Type strand, the amount of these phases formed in the RRP strand is relatively small. In the RRP strand subelements with a fine filament structure Nb$_{3}$Sn grows more quickly, thereby preventing to a large extent the formation of the other higher tin phases