Real time dynamic strain monitoring of optical links using the backreflection of live PSK data

A major cause of faults in optical communication links is related to unintentional third party intrusions (normally related to civil/agricultural works) causing fiber breaks or cable damage. These intrusions could be anticipated and avoided by monitoring the dynamic strain recorded along the cable. In this work, a novel technique is proposed to implement realtime distributed strain sensing in parallel with an operating optical communication channel. The technique relies on monitoring the Rayleigh backscattered light from optical communication data transmitted using standard modulation formats. The system is treated as a phase-sensitive OTDR (ΦOTDR) using random and non-periodical non-return-to-zero (NRZ) phase-shift keying (PSK) pulse coding. An I/Q detection unit allows for a full (amplitude, phase and polarization) characterization of the backscattered optical signal, thus achieving a fully linear system in terms of ΦOTDR trace coding/decoding. The technique can be used with different modulation formats, and operation using 4 Gbaud single-polarization dual PSK and 4 Gbaud dual-polarization quadrature PSK is demonstrated. As a proof of concept, distributed sensing of dynamic strain with a sampling of 125 kHz and a spatial resolution of 2.5 cm (set by the bit size) over 500 m is demonstrated for applied sinusoidal strain signals of 500 Hz. The limitations and possibilities for improvement of the technique are also discussed.European CommissionMinisterio de Economía y CompetitividadComunidad de Madri

Artificial realism Form and content in Elizabethan fiction

SIGLEAvailable from British Library Document Supply Centre- DSC:D90602 / BLDSC - British Library Document Supply CentreGBUnited Kingdo

Throughput gains from adaptive transceivers in nonlinear elastic optical networks

In this paper, we link the throughput gains, due to transceiver adaptation, in a point-to-point transmission link to the expected gains in a mesh network. We calculate the maximum network throughput for a given topology as we vary the length scale. We show that the expected gain in the network throughput due to transceiver adaptation is equivalent to the gain in a point-to-point link with a length equal to the mean length of the optical paths across the minimum network cut. We also consider upper and lower bounds on the variation of the gain in the network throughput due to transceiver adaptation, where integer-constrained channel bandwidth assignment and quantized adaptations are considered. This bounds the variability of results that can be expected and indicates why some networks can give apparently optimistic or pessimistic results. We confirm the results of previous authors that show finer quantization steps in the adaptive control lead to an increase in the throughput since the mean loss of throughput per transceiver is reduced. Finally, we consider the likely network advantage of digital nonlinear mitigation and show that a significant tradeoff occurs between the increase in the signal-to-noise ratio for larger mitigation bandwidths and the loss of throughput when routing fewer large-bandwidth superchannels

Impact of amplifier noise figure on network throughput

The impact of the amplifier noise figure (NF) on the optical network throughput is quantified from an information viewpoint. For every dB of NF decrease, throughput gains between 4% and 7% are reported

On optimal modulation and FEC overhead for future optical networks

Transceivers employing square PM-QAM with up to two FEC overheads are optimized based on the SNR distribution. For NSFNET two FEC overheads with PM-16QAM give an 82% throughput increase compared with PM-QPSK with 7% overhead

The benefit of split nonlinearity compensation for single-channel optical fiber communications

In this Letter we analyze the benefit of digital compensation of fiber nonlinearity, where the digital signal processing is divided between the transmitter and receiver. The application of the Gaussian noise model indicates that, where there are two or more spans, it is always beneficial to split the nonlinearity compensation. The theory is verified via numerical simulations, investigating transmission of single channel 50 GBd polarization division multiplexed 256-ary quadrature amplitude modulation over 100 km standard single mode fiber spans, using lumped amplification. For this case, the additional increase in mutual information achieved over transmitter- or receiver-side nonlinearity compensation is approximately 1 bit for distances greater than 2000 km. Further, it is shown, theoretically, that the SNR gain for long distances and high bandwidth transmission is 1.5 dB versus transmitter- or receiver-based nonlinearity compensation

The benefit of split nonlinearity compensation for single-channel optical fiber communications

In this Letter we analyze the benefit of digital compensation of fiber nonlinearity, where the digital signal processing is divided between the transmitter and receiver. The application of the Gaussian noise model indicates that, where there are two or more spans, it is always beneficial to split the nonlinearity compensation. The theory is verified via numerical simulations, investigating transmission of single channel 50 GBd polarization division multiplexed 256-ary quadrature amplitude modulation over 100 km standard single mode fiber spans, using lumped amplification. For this case, the additional increase in mutual information achieved over transmitter- or receiver-side nonlinearity compensation is approximately 1 bit for distances greater than 2000 km. Further, it is shown, theoretically, that the SNR gain for long distances and high bandwidth transmission is 1.5 dB versus transmitter- or receiver-based nonlinearity compensation