Effect of Thermal Treatment of Symmetric TiO₂ Nanotube Arrays in Argon on Photocatalytic CO₂ Conversion

Symmetric titania nanotube arrays (TiO2 NTs) are a well-known photocatalyst with a large surface area and band edge potentials suitable for redox reactions. Thermal treatment of symmetrical arrays of TiO2 nanotubes in argon was used to change the carbon content of the samples. The influence of the carbon content in the structure of symmetrical TiO2 NTs on their photoelectrochemical properties and photocatalytic activity in the conversion of CO2 into organic fuel precursors has been studied. The structure, chemical, and phase composition of obtained samples were studied by X-ray analysis, Raman spectroscopy, and SEM with energy dispersive analysis. It is established that carbon-related defects in the samples accumulate electrons on the surface required for the CO2 conversion reaction. It has been shown for the first time that varying the carbon content in symmetric TiO2 NTs arrays by annealing at different temperatures in argon makes it possible to control the yield of methane and methanol in CO2 conversion. It is revealed that too high a concentration of carbon dangling bonds promotes the growth of CO2 conversion efficiency but causes instability in this process. The obtained results show a high promise of symmetric carbon-doped TiO2 NTs arrays for the photocatalytic conversion of CO2

Aluminum-Based Plasmonic Photodetector for Sensing Applications

Plasmonic sensors have great potential for widespread usage. However, the prohibitive cost of noble metals restrains the wider adoption of these devices. The aim of our study is to develop a cost-effective Al-based alternative to common noble metal-based plasmonic detectors. We considered a structure consisting of an n-type doped Si wafer with a shallow p-n junction and an overlying Al grating with a trapezoidal groove profile. The RCWA (rigorous coupled-wave analysis) method was used to numerically calculate the distribution of absorbed light energy in the plasmonic detector layers and to optimize the grating parameters. Based on the simulation results, experimental samples of plasmonic photodetectors with optimal grating parameters (period—633 nm, relief depth—50 nm, groove filling factor—0.36, and thickness of the intermediate Al layer—14 nm) were manufactured, and their properties were studied. For these samples, we obtained a polarization sensitivity value of Ip/Is = 8, an FWHM of the resonance in the photocurrent spectrum ranging from 50 to 100 nm, a sensitivity at the resonance maximum of Iph = 0.04–0.06 A/W, and an angular half-width of photocurrent resonance of Δθ = 5°, which are comparable to noble metal-based analogs. Our results may be used for creating cost-effective high-sensitivity plasmonic sensors