64 research outputs found

    Ultrashort Pulse Generation in Ce:LiCAF Ultraviolet Laser

    Get PDF
    Transient cavity method used to generate ultrashort laser pulses in dye lasers is extended to a solid-state gain medium. Numerical simulations are performed to investigate the spectro-temporal evolution of broadband ultraviolet (UV) laser emission from Ce3+-doped LiCaAlF6 (Ce:LiCAF), which is represented as a system of two homogeneous broadened singlet states. By solving the rate equations extended to multiple wavelengths, the appropriate cavity length and Q-factor for optimal photon cavity decay time and pumping energy that will generate resonator transients is determined. Formation of resonator transients could generate picosecond UV laser pulses from a Ce:LiCAF crystal pumped by the fourth harmonics (266 nm) of a Nd:YAG laser. Numerical simulations indicate that a 1-mol% Ce3+-doped LiCAF crystal that is 1-mm long can generate a single picosecond pulse. This is accomplished by using a low Q (output coupler reflectivity of 10%), short cavity (cavity length of 2 mm) laser oscillator. Ultrashort pulses can also be generated using other rare earth-doped fluoride laser materials using this technique

    Radiation resistance of praseodymium-doped aluminum lithium fluorophosphate scintillator glasses for laser fusion experiments

    Get PDF
    We report the gamma (γ)-ray radiation resistance of praseodymium (Pr3+)-doped aluminum lithium fluorophosphate scintillator glasses. For its assessment as a scintillator material for laser fusion experiments, a 20Al(PO3)3-80LiF-PrF3 (Pr3+-doped APLF) glass was irradiated with γ-rays from a cobalt-60 (60Co) source resulting in an absorbed dose of 5.2 kGy. Although γ-ray-irradiation results in increased absorption due to phosphorus-oxygen hole centers (POHCs) and PO32− electron centers (PO3 ECs), these radiation-induced defects do not modify the glass emission as both non-irradiated and γ-ray-irradiated glasses exhibit similar emission spectra and decay times under optical and X-ray excitation. The emission peaks observed also correspond to the different interconfigurational 4f5d → 4f2 and intraconfigurational 4f2 transitions of Pr3+ ions which are neither oxidized nor reduced by irradiation. Our results show that Pr3+-doped APLF glass still maintains its characteristic fast decay time and that γ-ray irradiation does not affect the glass scintillation mechanisms.Shinohara K., Empizo M.J.F., Cadatal-Raduban M., et al. Radiation resistance of praseodymium-doped aluminum lithium fluorophosphate scintillator glasses for laser fusion experiments. Japanese Journal of Applied Physics 62, 010613 (2023); https://doi.org/10.35848/1347-4065/aca0d4

    Elastic Scattering Time–Gated Multi–Static Lidar Scheme for Mapping and Identifying Contaminated Atmospheric Droplets

    Get PDF
    Numerical simulations are performed to determine the angular dependence of the MIe scattering cross-section intensities of pure water droplets and pollutants such as contaminated water droplets and black carbon as a function of the wavelength of the incident laser light, complex refractive index, and size of the scatterer. Our results show distinct scattering features when varying the various scattering parameters, thereby allowing the identification of the scattering particle with specific application to the identification of atmospheric pollutants including black carbon. Regardless of the type of scatterer, the scattering intensity is nearly uniform with a slight preference for forward scattering when the size of the particle is within 20% of the incident laser’s wavelength. The scattering patterns start to exhibit distinguishable features when the size parameter equals 1.77, corresponding to an incident laser wavelength of 0.355 μm and a particle radius of 0.1 μm. The patterns then become increasingly unique as the size parameter increases. Based on these calculations, we propose a time-gated lidar scheme consisting of multiple detectors that can rotate through a telescopic angle and be placed equidistantly around the scattering particles to collect the backscattered light and a commercially available Q-switched laser system emitting at tunable laser wavelengths. By using a pulsed laser with 10-ns pulse duration, our scheme could distinguish scattering centers that are at least 3 m apart. Our scheme called MIe Scattering Time-gated multi-Static LIDAR (MISTS–LIDAR) would be capable of identifying the type of atmospheric pollutant and mapping its location with a spatial resolution of a few meters.Mui L.V., Hung T.N., Shinohara K., et al. Elastic Scattering Time–Gated Multi–Static Lidar Scheme for Mapping and Identifying Contaminated Atmospheric Droplets. Applied Sciences (Switzerland) 13, 172 (2023); https://doi.org/10.3390/app13010172

    Optical transmittance investigation of 1-keV ion-irradiated sapphire crystals as potential VUV to NIR window materials of fusion reactors

    Get PDF
    We investigate the optical transmittances of ion-irradiated sapphire crystals as potential vacuum ultraviolet (VUV) to near-infrared (NIR) window materials of fusion reactors. Under potential conditions in fusion reactors, sapphire crystals are irradiated with hydrogen (H), deuterium (D), and helium (He) ions with 1-keV energy and ∼ 1020-m-2 s-1 flux. Ion irradiation decreases the transmittances from 140 to 260 nm but hardly affects the transmittances from 300 to 1500 nm. H-ion and D-ion irradiation causes optical absorptions near 210 and 260 nm associated with an F-center and an F+-center, respectively. These F-type centers are classified as Schottky defects that can be removed through annealing above 1000 K. In contrast, He-ion irradiation does not cause optical absorptions above 200 nm because He-ions cannot be incorporated in the crystal lattice due to the large ionic radius of He-ions. Moreover, the significant decrease in transmittance of the ion-irradiated sapphire crystals from 140 to 180 nm is related to the light scattering on the crystal surface. Similar to diamond polishing, ion irradiation modifies the crystal surface thereby affecting the optical properties especially at shorter wavelengths. Although the transmittances in the VUV wavelengths decrease after ion irradiation, the transmittances can be improved through annealing above 1000 K. With an optical transmittance in the VUV region that can recover through simple annealing and with a high transparency from the ultraviolet (UV) to the NIR region, sapphire crystals can therefore be used as good optical windows inside modern fusion power reactors in terms of light particle loadings of hydrogen isotopes and helium.Iwano K., Yamanoi K., Iwasa Y., et al. Optical transmittance investigation of 1-keV ion-irradiated sapphire crystals as potential VUV to NIR window materials of fusion reactors. AIP Advances 6, 105108 (2016); https://doi.org/10.1063/1.4965927

    赤外光の可能性 近赤外光からテラヘルツ光

    No full text
    corecore