32 research outputs found
Planar Silicon Metamaterial Lenslet Arrays for Millimeter-wavelength Imaging
Large imaging arrays of detectors at millimeter and submillimeter wavelengths
have applications that include measurements of the faint polarization signal in
the Cosmic Microwave Background (CMB), and submillimeter astrophysics. We are
developing planar lenslet arrays for millimeter-wavelength imaging using
metamaterials microlithically fabricated using silicon wafers. This
metamaterial technology has many potential advantages compared to conventional
hemispherical lenslet arrays, including high precision and homogeneity, planar
integrated anti-reflection layers, and a coefficient of thermal expansion
matched to the silicon detector wafer. Here we describe the design process for
a gradient-index (GRIN) metamaterial lenslet using metal-mesh patterned on
silicon and a combination of metal-mesh and etched-hole metamaterial
anti-reflection layers. We optimize the design using a bulk-material model to
rapidly simulate and iterate on the lenslet design. We fabricated prototype
GRIN metamaterial lenslet array and mounted it on a Polarbear/Simons Array
90/150~GHz band transition edge sensor (TES) bolometer detector array with
sinuous planar antennas. Beam measurements of a prototype lenslet array agree
reasonably well with the model simulations. We plan to further optimize the
design and combine it with a broadband anti-reflection coating to achieve
operation over 70--350~GHz bandwidth.Comment: Presented at SPIE Millimeter, Submillimeter, and Far-Infrared
Detectors and Instrumentation for Astronomy X, December 13-18, 202
Methods for CT Automatic Exposure Control Protocol Translation Between Scanner Platforms
Pediatric CT Protocols From the American Association of Physicists in Medicine Alliance for Quality CT
Recommended from our members
Methods for CT Automatic Exposure Control Protocol Translation Between Scanner Platforms
PurposeAn imaging facility with a diverse fleet of CT scanners faces considerable challenges when propagating CT protocols with consistent image quality and patient dose across scanner makes and models. Although some protocol parameters can comfortably remain constant among scanners (eg, tube voltage, gantry rotation time), the automatic exposure control (AEC) parameter, which selects the overall mA level during tube current modulation, is difficult to match among scanners, especially from different CT manufacturers.MethodsObjective methods for converting tube current modulation protocols among CT scanners were developed. Three CT scanners were investigated, a GE LightSpeed 16 scanner, a GE VCT scanner, and a Siemens Definition AS+ scanner. Translation of the AEC parameters such as noise index and quality reference mAs across CT scanners was specifically investigated. A variable-diameter poly(methyl methacrylate) phantom was imaged on the 3 scanners using a range of AEC parameters for each scanner. The phantom consisted of 5 cylindrical sections with diameters of 13, 16, 20, 25, and 32 cm. The protocol translation scheme was based on matching either the volumetric CT dose index or image noise (in Hounsfield units) between two different CT scanners. A series of analytic fit functions, corresponding to different patient sizes (phantom diameters), were developed from the measured CT data. These functions relate the AEC metric of the reference scanner, the GE LightSpeed 16 in this case, to the AEC metric of a secondary scanner.ResultsWhen translating protocols between different models of CT scanners (from the GE LightSpeed 16 reference scanner to the GE VCT system), the translation functions were linear. However, a power-law function was necessary to convert the AEC functions of the GE LightSpeed 16 reference scanner to the Siemens Definition AS+ secondary scanner, because of differences in the AEC functionality designed by these two companies.ConclusionsProtocol translation on the basis of quantitative metrics (volumetric CT dose index or measured image noise) is feasible. Protocol translation has a dependency on patient size, especially between the GE and Siemens systems. Translation schemes that preserve dose levels may not produce identical image quality
Methods for CT Automatic Exposure Control Protocol Translation Between Scanner Platforms
PURPOSE: An imaging facility with a diverse fleet of CT scanners faces considerable challenges when propagating CT protocols with consistent image quality and patient dose across scanner makes and models. While some protocol parameters can comfortably remain constant between scanners (e.g. kV, gantry rotation time, etc.), the automatic exposure control parameter, which selects the overall mA level during tube current modulation, is difficult to match between scanners, especially from different CT manufacturers. METHOD: Objective methods for converting tube-current-modulation protocols between CT scanners were developed. Three CT scanners were investigated, a GE LightSpeed 16 scanner, a GE VCT scanner, and a Siemens Definition AS+ scanner. Translation of the automatic exposure control (AEC) parameters such as noise index or quality reference mAs across CT scanners was specifically investigated. A variable-diameter polymethyl methacrylate (PMMA) phantom was imaged on the three scanners using a range of AEC parameters for each scanner. The phantom consisted of 5 cylindrical sections with diameters of 13 cm, 16 cm, 20 cm, 25 cm, and 32 cm. The protocol translation scheme was based upon matching either the CTDI(vol) or image noise (in HU) between two different CT scanners. A series of analytical fit functions, corresponding to different patient sizes (phantom diameters) were developed from the measured CT data. These functions relate the AEC metric of the reference scanner, the GE LightSpeed 16 in this case, to the AEC metric of a secondary scanner. RESULTS: When translating protocols between different models of CT scanners (from the GE LightSpeed 16 reference scanner to the GE VCT system), the translation functions were linear. However, a power-law function was necessary to convert the AEC functions of the GE LightSpeed 16 reference scanner to the Siemens Definition AS+ secondary scanner, due to differences in the AEC functionality designed by these two companies. CONCLUSIONS: Protocol translation based on quantitative metrics – volume computed tomography dose index or measured image noise is feasible. Protocol translation has a dependency on patient size, especially between the GE and Siemens’ systems. Translation schemes that preserve dose levels may not produce identical image quality
Real-time dosimeter employed to evaluate the half-value layer in CT
Half-value layer (HVL) measurements on commercial whole body computer tomography (CT) scanners require serial measurements and, in many institutions, the presence of a service engineer. An assembly of aluminum filters (AAF), designed to be used in conjunction with a real-time dosimeter, was developed to provide estimates of the HVL using clinical protocols. Two real-time dose probes, a solid-state and air ionization chamber, were examined. The AAF consisted of eight rectangular filters of high-purity aluminum (Type 1100), symmetrically positioned to form a cylindrical 'cage' around the probe's detective volume. The incident x-ray beam was attenuated by varying thicknesses of aluminum filters as the gantry completed a minimum of one rotation. Measurements employing real-time chambers were conducted both in service mode and with a routine abdomen/pelvis protocol for several combinations of x-ray tube potentials and bow tie filters. These measurements were validated against conventional serial HVL measurements. The average relative difference between the HVL measurements using the two methods was less than 5% when using a 122 mm diameter AAF; relative differences were reduced to 1.1% when the diameter was increased to 505 mm, possibly due to reduced scatter contamination. Use of a real-time dose probe and the AAF allowed for time-efficient measurements of beam quality on a clinical CT scanner using clinical protocols
Dynein and Dynactin Leverage Their Bivalent Character to Form a High-Affinity Interaction
Amanda E. Siglin is with Thomas Jefferson University, Shangjin Sun is with University of Delaware, Jeffrey K. Moore is with Washington University in Saint Louis, Sarah Tan is with UT Austin, Martin Poenie is with UT Austin, James D. Lear is with University of Pennsylvania, Tatyana Polenova is with University of Delaware, John A. Cooper is with Washington University in Saint Louis, and John C. Williams is with Thomas Jefferson University and Beckman Research Institute at City of Hope.Cytoplasmic dynein and dynactin participate in retrograde transport of organelles, checkpoint signaling and cell division. The principal subunits that mediate this interaction are the dynein intermediate chain (IC) and the dynactin p150Glued; however, the interface and mechanism that regulates this interaction remains poorly defined. Herein, we use multiple methods to show the N-terminus of mammalian dynein IC, residues 10–44, is sufficient for binding p150Glued. Consistent with this mapping, monoclonal antibodies that antagonize the dynein-dynactin interaction also bind to this region of the IC. Furthermore, double and triple alanine point mutations spanning residues 6 to 19 in the yeast IC homolog, Pac11, produce significant defects in spindle positioning. Using the same methods we show residues 381 to 530 of p150Glued form a minimal fragment that binds to the dynein IC. Sedimentation equilibrium experiments indicate that these individual fragments are predominantly monomeric, but admixtures of the IC and p150Glued fragments produce a 2:2 complex. This tetrameric complex is sensitive to salt, temperature and pH, suggesting that the binding is dominated by electrostatic interactions. Finally, circular dichroism (CD) experiments indicate that the N-terminus of the IC is disordered and becomes ordered upon binding p150Glued. Taken together, the data indicate that the dynein-dynactin interaction proceeds through a disorder-to-order transition, leveraging its bivalent-bivalent character to form a high affinity, but readily reversible interaction.This work was supported in part by National Institutes of Health R21NS071166 (J.C.W.), R01GM085306 (J.C.W. & T.P.), NCRR SRR022316A (J.C.W.), GM 47337 (J.A.C.), NCRR 5P20RR017716-07 (T.P.), 5-T32-DK07705 (A.E.S) and The American Heart Association 0715196U (A.E.S). The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.Cellular and Molecular Biolog
Development of a patient-specific two-compartment anthropomorphic breast phantom
PURPOSE: To develop a technique for the construction of a two-compartment anthropomorphic breast phantom specific to an individual patient’s pendant breast anatomy. METHODS: Three-dimensional breast images were acquired on a prototype dedicated breast computed tomography (bCT) scanner as part of an ongoing IRB-approved clinical trial of bCT. The images from the breast of a patient were segmented into adipose and glandular tissue regions and divided into 1.59 mm thick breast sections to correspond to the thickness of polyethylene stock. A computer controlled water-jet cutting machine was used to cut the outer breast edge and the internal regions corresponding to glandular tissue from the polyethylene. The stack of polyethylene breast segments was encased in a thermoplastic “skin” and filled with water. Water-filled spaces modeled glandular tissue structures and the surrounding polyethylene modeled the adipose tissue compartment. Utility of the phantom was demonstrated by inserting 200 μm microcalcifications as well as measuring point dose deposition during bCT scanning. RESULTS: Rigid registration of the original patient images with bCT images of the phantom showed similar tissue distribution. Linear profiles through the registered images demonstrated a mean coefficient of determination (r(2)) between grayscale profiles of 0.881. The exponent of the power law describing the anatomical noise power spectrum was identical in the coronal images of the patient’s breast and the phantom. Microcalcifications were visualized in the phantom at bCT scanning. Real-time air kerma rate was measured during bCT scanning and fluctuated with breast anatomy. On average, point dose deposition was 7.1% greater than mean glandular dose. CONCLUSIONS: A technique to generate a two-compartment anthropomorphic breast phantom from bCT images has been demonstrated. The phantom is the first, to our knowledge, to accurately model the uncompressed pendant breast and the glandular tissue distribution for a specific patient. The modular design of the phantom allows for studies of a single breast segment and the entire breast volume. Insertion of other devices, materials, and tissues of interest into the phantom provide a robust platform for future breast imaging and dosimetry studies