Efficiency Optimization in Digitally Controlled Flyback DC-DC Converters Over Wide Ranges of Operating Conditions

Because of increasingly demanding energy programs and initiatives, it is required to maintain high efficiency in various DC-DC converter applications over wide ranges of operating conditions. To achieve these efficiency goals, this thesis introduces an efficiency optimization approach, which can be applied to given power stages. In the proposed optimization approach, power stage design parameters and controller parameters are concurrently optimized over a range of operating conditions based on power loss models and multi-variable non-linear constrained optimization. A digital controller facilitates on-line efficiency optimization by storing the optimum controller parameters in a look-up table. A flyback DC-DC converter, commonly used in low output power applications, is adopted for experimental verifications of the proposed optimization approach. A valley switching technique is employed to significantly decrease MOSFET turn-on switching loss in discontinuous conduction mode (DCM), and solutions to a problem related to undesirable frequency hopping, commonly observed in other valley switching schemes, are proposed and discussed. A gain-scheduled compensator and a new control scheme, named k-control, are implemented for consistent transient responses over different operating conditions. Finally, simplified sensing and analog-to-digital (A/D) conversion techniques are proposed, targeting a low-cost, small-size and low-pin-count (≤ 8) digital controller IC chip implementation

Real-time detection of an airborne microorganism using inertial impaction and mini-fluorescent microscopy

To achieve successful real-time detection of airborne pathogenic microorganisms, the problem must be considered in terms of their physical size and biological characteristics. We developed an airborne microorganism detection chip to realize the detection of microorganisms, ensuring compactness, sensitivity, cost-efficiency, and portability, using three key components: an inertial impaction system, a cartridge-type impaction plate, and a mini-fluorescent microscope. The inertial impaction system was used to separate microorganisms in terms of their aerodynamic particle size, and was fabricated with three impaction stages. Numerical analysis was performed to design the system; the calculated cutoff diameter at each impaction stage was 2.02 (first stage), 0.88 (second stage), and 0.54 μm (third stage). The measured cutoff diameters were 2.24, 0.91, and 0.49 μm, respectively. A cartridge-type impaction plate was used, composed of molded polydimethylsiloxane (PDMS) and an actual impaction region made of a SYBR green I dye-stained agar plate. A mini-fluorescent microscope was used to distinguish microbes from non-biological particles. Images of the microorganisms deposited at the impaction zone were obtained via mini-fluorescent microscopy, and fluorescent intensities of the images were calculated using in-house image-processing software. The results showed that the developed system successfully identified aerosolized biological particles from non-biological particles in real time

Association of serum adipocytokine levels with cardiac autonomic neuropathy in type 2 diabetic patients

<p>Abstract</p> <p>Background</p> <p>Cardiac autonomic neuropathy (CAN) is a common complication of diabetes associated with poor prognosis. In addition, the autonomic imbalance is associated with cardiovascular disease (CVD) in diabetes. It is thought that adipocytokines contribute to the increased risk of vascular complications in patients with type 2 diabetes mellitus (T2DM). However, literature data on the association between CAN with adipocytokines such as leptin, tumor necrosis factor-alpha (TNF-alpha), adiponectin in subjects with T2DM is limited.</p> <p>Therefore, in the present study, we examined the relationship between fasting serum leptin, TNF- alpha and adiponectin and CAN in Korean T2DM patients.</p> <p>Methods</p> <p>A total of 142 T2DM patients (94 males, 48 females) were recruited. CAN was assessed by the five tests according to the Ewing's protocol and the time and frequency domain of the heart rate variability (HRV) was evaluated. Serum TNF-alpha and adiponectin levels were measured using enzyme-linked immunosorbent assay and serum leptin levels were measured using radioimmunoassay.</p> <p>Results</p> <p>Although, the mean levels of leptin, TNF-alpha and adiponectin were not significantly different between the groups with and without CAN, the levels of leptin and adiponectin had a tendency to increase as the score of CAN increased (p = 0.05, p = 0.036). Serum leptin levels demonstrated a negative correlation with low frequency (LF) in the upright position (p = 0.037). Regarding TNF-alpha, a significant negative correlation was observed with SDNN and RMSSD in the upright position (p = 0.023, p = 0.019). Adiponectin levels were not related to any HRV parameters. Multivariate logistic regression analysis demonstrated that the odds of CAN increased with a longer duration of diabetes (1.25, [1.07-1.47]) and higher homeostatic model of assessment-insulin resistance (HOMA-IR) (5.47, [1.8-16.5]). The relative risks for the presence of CAN were 14.1 and 51.6 for the adiponectin 2^nd, 3^rdtertiles when compared with first tertile (p-value for trend = 0.022).</p> <p>Conclusions</p> <p>In the present study, the higher serum adiponectin levels and HOMA-IR were associated with an increased risk for the presence of CAN. Also, the CAN score correlated with the serum adiponectin. Serum adipocytokines such as leptin and TNF-alpha were significantly correlated with parameters of HRV, representative markers of CAN. Future prospective studies with larger number of patients are required to establish a direct relationship between plasma adipocytokine concentrations and the development or severity of CAN.</p

Differential associations of central and brachial blood pressure with carotid atherosclerosis and microvascular complications in patients with type 2 diabetes

BACKGROUND: We examined the relationship between central blood pressure (BP), brachial BP with carotid atherosclerosis and microvascular complications in type 2 diabetes mellitus (T2DM). METHODS: We recruited 201 patients who were evaluated for central BP, brachial BP, carotid ultrasonography, brachial-ankle pulse wave velocity (baPWV), ankle-brachial index (ABI) and microvascular complications. Central BP were calculated using a radial automated tonometric system. RESULTS: Agreement between central BP and brachial BP was very strong (concordance correlation coefficient between central and brachial SBP = 0.889, between central and brachial PP = 0.816). Central pulse pressure (PP) was correlated with mean carotid intima-media thickness (CIMT), baPWV and ABI, whereas brachial PP was borderline significantly correlated with CIMT. The prevalence of nephropathy(DN) and retinopathy(DR) according to the brachial PP tertiles increased, the prevalences of microvascular complications were not different across central PP tertiles. In multivariate analysis, the relative risks (RRs) for the presence of DR were 1.2 and 4.6 for the brachial PP tertiles 2 and 3 when compared with the first tertile. Also, the RRs for the presence of DN were 1.02 and 3 for the brachial PP tertiles 2 and 3 when compared with the first tertile. CONCLUSIONS: Agreement of central BP and brachial BP was very strong. Nonetheless, this study showed that higher brachial PP levels are associated with increased probability for the presence of microvascular complications such as DR/DN. However, there are no associations with central SBP and central PP with microvascular complications. Central BP levels than brachial BP are correlated with surrogate marker of macrovascular complications

Spatio-Temporal Images of Single Streamer Propagation in Dielectric Barrier Discharge

One-dimensional time-dependent numerical simulations are presented to find the discharge mechanism and illustrate the spatio-temporal images of a single streamer in the dielectric barrier discharge (DBD). Calculated results reveal that the three discharge phases of avalanche, streamer, and decay are distinguished depending on the external voltage applied to the electrodes in the DBD. At different over-voltage conditions, the time evolutions of discharge currents show distinct profiles which adequately explain the spatio-temporal variations of the single streamer in the DBD