Investigating heat stress in gari frying

One of the greatest discomforts widely reported in gari frying is heat stress experienced by the processors.  The effects of this risk, among other inherent risks, on the workers call for detailed investigation into the cause and effects with a view to mitigating them.  When excessive, this can cause heat stroke, a condition that can either threaten our lives or cause dire consequences.  This study was carried out in 40 gari-frying workstations in Ifo Local Government area of Ogun State and its environs.  Data were collected with questionnaire and oral interview, together with the use of a heat stress assessment checklist.  Further qualitative analysis was done using Wet Bulb Globe Temperature (WBGT).  Statistical analysis was performed using Analysis of Variance (ANOVA) to test hypothesis on the WBGT.  The mean value of WBGT index recorded was 35oC, which is above the permissible WBGT of 31oC, indicating the prevalence of heat stress.  The use of other low level but more effective source of heat has been recommended, such that workers would have less contact with heat during the frying task.   Keywords: heat stress, gari frying, wet bulb globe temperature index, check list, ergonomics

Effect of Computerized Maintenance Management System on a Cement Production Plant

This study evaluated effect of Computerized Maintenance Management System (CMMS) on a cement production plant. The materials used included a Computer and Networking system and maintenance software. Preliminary study of plant assets was carried out to identify critical plant assets and key performance indicators such as Plant Reliability Factor (RF), Number of Stoppage for Incidents (NSI) and Production Losses (PL) in 2013. The CMMS software implementation in 2015 used the data obtained. The result obtained from this implementation showed that the RF (%) for Limestone Crusher (LC), Cement Mill (CM) and Kiln were 46, 76, 86; 51, 79, 88; 59, 88, 92 in 2013, 2014 and 2015 respectively. The corresponding NSI for the three plants were 824, 472, 82; 788, 462, 56; 431, 420, 46 in 2013, 2014 and 2015 respectively. The Production Losses for the whole plant were $22.54m,$21.587m and $19.365m in 2013, 2014 and 2015 respectively

Anthropometric studies for designing to fit gari-frying workers

 Work system and product design require anthropometric data of the user population relevant to the facility in order to have safe operation in service as well as increase user satisfaction and efficiency. Designing to fit gari-frying workers in each of the southwestern states in Nigeria is geared towards this end. The age, weight and twenty-five body dimensions of 120 gari-frying workers in Lagos, Ogun, Oyo, Osun, Ondo and Ekiti, selected by random sampling, were measured. The body dimensions include stature, shoulder height, sitting height, eye height, forward grip reach, buttock-popliteal height, buttock-knee length, knee height, thigh clearance, forearm-to-forearm breadth, waist depth, elbow rest height, knuckle height, elbow grip length, hip breadth, hand length, hand breadth, hand thickness, grip span and lumbar height. SPSS 20 software was used to perform statistical analysis to determine the mean, standard deviation, minimum and maximum values, 2nd, 5th, 25th, 50th, 75th and 95th percentiles for each state. Ogun state was used as a control, against which means of body dimension data, collected from other states, were compared using paired sample t-test. The results revealed that some of the body dimensions showed significant difference across the states at P≤0.05 with Oyo having more anthropometric parameters that differ from that of Ogun and Ondo having the least. Between 11.42% and 24.25% difference in the mean age, weight and lumbar height was observed in all the states. Osun state has the highest mean BMI and BSA values of 32.38 kg/m2 and 1.82 m2, respectively. These results are the required data for the design of facility and products for gari-frying workers as well as in similar women workspaces, especially in processing centres

Adapting television satellite dish for low-temperature solar thermal application: Experimental evaluation

Digital television broadcasting is currently becoming popular and as a result, the purchase of television cable dishes and other accessories are on the rise. Abandoned television satellite dishes continue to litter our environment due to obsolescence. Finding alternative use stands as a control measure for this inevitable environmental degradation. This paper, therefore, investigates the adaptation for low temperature solar thermal application. The TV satellite dish selected for this study has a diameter of 33.9 cm, depth of 9 cm and a focal point of 31.2 cm. The components added to the dish include; a reflective surface, pot stand, adjustable chain, dish support stand and base, control arm. This system was used in carrying out stagnation test on three different types of pots (aluminium, iron and stainless steel pots) positioned at the focal point. Other performance parameters studied include; standard stagnation temperature (SST) and the rate of change of pot temperature. The maximum stagnation temperatures attained by the inside of the iron, aluminium and stainless steel pots were 68, 80 and 82 °C respectively after 10, 13 and 40 minutes respectively; while their respective maximum SST were 100, 57 and 50 oC. The maximum temperature change inside the iron, aluminium and stainless steel pots were above 9, 12 and 10 oC/min. The result gathered shows that this system will be suitable for lower temperature applications like pasteurization, sterilization, household water heating, etc

Enhancing the inhibition potential of sodium tungstate towards mitigating the corrosive effect of Acidithiobaccillus thiooxidan on X-52 carbon steel

Microbial corrosion of the external surface of carbon steel pipes was investigated using sodium tungstate, sodium nitrite and zinc nitrite as individual and combined inhibitors. The study involved carbon steel pipes in contact with Acidithiobaccillus thiooxidan. Inhibitor efficiencies were determined and the optimum inhibitor concentration required to effectively limit the corrosive effect of the microbe was 51–52 g/L for the best inhibitor. Also, despite the limiting effect of sodium nitrite in its other inhibitor formulations, its presence in the mixture of all three components, improved the performance of the other two chemicals giving the best inhibition efficiency of 85.68%

Enhancing the inhibition potential of sodium tungstate towards mitigating the corrosive effect of Acidithiobaccillus thiooxidan on X-52 carbon steel

Microbialcorrosionoftheexternalsurfaceofcarbonsteelpipeswasinvestigatedusingsodiumtungstate,sodium nitrite and zinc nitrite as individual and combined inhibitors. The study involved carbon steel pipes in contact with Acidithiobaccillus thiooxidan. Inhibitor efficiencies were determined and the optimum inhibitor concentration required to effectively limit the corrosive effect of the microbe was 51–52g/L for the best inhibitor. Also, despite the limiting effect of sodium nitrite in its other inhibitor formulations, its presence in the mixture of all three components, improved the performance of the other two chemicals giving the best inhibition efficiency of 85.68%

The evolving SARS-CoV-2 epidemic in Africa: Insights from rapidly expanding genomic surveillance

INTRODUCTION Investment in Africa over the past year with regard to severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) sequencing has led to a massive increase in the number of sequences, which, to date, exceeds 100,000 sequences generated to track the pandemic on the continent. These sequences have profoundly affected how public health officials in Africa have navigated the COVID-19 pandemic. RATIONALE We demonstrate how the first 100,000 SARS-CoV-2 sequences from Africa have helped monitor the epidemic on the continent, how genomic surveillance expanded over the course of the pandemic, and how we adapted our sequencing methods to deal with an evolving virus. Finally, we also examine how viral lineages have spread across the continent in a phylogeographic framework to gain insights into the underlying temporal and spatial transmission dynamics for several variants of concern (VOCs). RESULTS Our results indicate that the number of countries in Africa that can sequence the virus within their own borders is growing and that this is coupled with a shorter turnaround time from the time of sampling to sequence submission. Ongoing evolution necessitated the continual updating of primer sets, and, as a result, eight primer sets were designed in tandem with viral evolution and used to ensure effective sequencing of the virus. The pandemic unfolded through multiple waves of infection that were each driven by distinct genetic lineages, with B.1-like ancestral strains associated with the first pandemic wave of infections in 2020. Successive waves on the continent were fueled by different VOCs, with Alpha and Beta cocirculating in distinct spatial patterns during the second wave and Delta and Omicron affecting the whole continent during the third and fourth waves, respectively. Phylogeographic reconstruction points toward distinct differences in viral importation and exportation patterns associated with the Alpha, Beta, Delta, and Omicron variants and subvariants, when considering both Africa versus the rest of the world and viral dissemination within the continent. Our epidemiological and phylogenetic inferences therefore underscore the heterogeneous nature of the pandemic on the continent and highlight key insights and challenges, for instance, recognizing the limitations of low testing proportions. We also highlight the early warning capacity that genomic surveillance in Africa has had for the rest of the world with the detection of new lineages and variants, the most recent being the characterization of various Omicron subvariants. CONCLUSION Sustained investment for diagnostics and genomic surveillance in Africa is needed as the virus continues to evolve. This is important not only to help combat SARS-CoV-2 on the continent but also because it can be used as a platform to help address the many emerging and reemerging infectious disease threats in Africa. In particular, capacity building for local sequencing within countries or within the continent should be prioritized because this is generally associated with shorter turnaround times, providing the most benefit to local public health authorities tasked with pandemic response and mitigation and allowing for the fastest reaction to localized outbreaks. These investments are crucial for pandemic preparedness and response and will serve the health of the continent well into the 21st century

Mortality from gastrointestinal congenital anomalies at 264 hospitals in 74 low-income, middle-income, and high-income countries: a multicentre, international, prospective cohort study

Summary Background Congenital anomalies are the fifth leading cause of mortality in children younger than 5 years globally. Many gastrointestinal congenital anomalies are fatal without timely access to neonatal surgical care, but few studies have been done on these conditions in low-income and middle-income countries (LMICs). We compared outcomes of the seven most common gastrointestinal congenital anomalies in low-income, middle-income, and high-income countries globally, and identified factors associated with mortality. Methods We did a multicentre, international prospective cohort study of patients younger than 16 years, presenting to hospital for the first time with oesophageal atresia, congenital diaphragmatic hernia, intestinal atresia, gastroschisis, exomphalos, anorectal malformation, and Hirschsprung’s disease. Recruitment was of consecutive patients for a minimum of 1 month between October, 2018, and April, 2019. We collected data on patient demographics, clinical status, interventions, and outcomes using the REDCap platform. Patients were followed up for 30 days after primary intervention, or 30 days after admission if they did not receive an intervention. The primary outcome was all-cause, in-hospital mortality for all conditions combined and each condition individually, stratified by country income status. We did a complete case analysis. Findings We included 3849 patients with 3975 study conditions (560 with oesophageal atresia, 448 with congenital diaphragmatic hernia, 681 with intestinal atresia, 453 with gastroschisis, 325 with exomphalos, 991 with anorectal malformation, and 517 with Hirschsprung’s disease) from 264 hospitals (89 in high-income countries, 166 in middleincome countries, and nine in low-income countries) in 74 countries. Of the 3849 patients, 2231 (58·0%) were male. Median gestational age at birth was 38 weeks (IQR 36–39) and median bodyweight at presentation was 2·8 kg (2·3–3·3). Mortality among all patients was 37 (39·8%) of 93 in low-income countries, 583 (20·4%) of 2860 in middle-income countries, and 50 (5·6%) of 896 in high-income countries (p<0·0001 between all country income groups). Gastroschisis had the greatest difference in mortality between country income strata (nine [90·0%] of ten in lowincome countries, 97 [31·9%] of 304 in middle-income countries, and two [1·4%] of 139 in high-income countries; p≤0·0001 between all country income groups). Factors significantly associated with higher mortality for all patients combined included country income status (low-income vs high-income countries, risk ratio 2·78 [95% CI 1·88–4·11], p<0·0001; middle-income vs high-income countries, 2·11 [1·59–2·79], p<0·0001), sepsis at presentation (1·20 [1·04–1·40], p=0·016), higher American Society of Anesthesiologists (ASA) score at primary intervention (ASA 4–5 vs ASA 1–2, 1·82 [1·40–2·35], p<0·0001; ASA 3 vs ASA 1–2, 1·58, [1·30–1·92], p<0·0001]), surgical safety checklist not used (1·39 [1·02–1·90], p=0·035), and ventilation or parenteral nutrition unavailable when needed (ventilation 1·96, [1·41–2·71], p=0·0001; parenteral nutrition 1·35, [1·05–1·74], p=0·018). Administration of parenteral nutrition (0·61, [0·47–0·79], p=0·0002) and use of a peripherally inserted central catheter (0·65 [0·50–0·86], p=0·0024) or percutaneous central line (0·69 [0·48–1·00], p=0·049) were associated with lower mortality. Interpretation Unacceptable differences in mortality exist for gastrointestinal congenital anomalies between lowincome, middle-income, and high-income countries. Improving access to quality neonatal surgical care in LMICs will be vital to achieve Sustainable Development Goal 3.2 of ending preventable deaths in neonates and children younger than 5 years by 2030