Satellites of Simulated Galaxies: survival, merging, and their relation to the dark and stellar halos

We study the population of satellite galaxies formed in a suite of N-body/gasdynamical simulations of galaxy formation in a LCDM universe. We find little spatial or kinematic bias between the dark matter and the satellite population. The velocity dispersion of the satellites is a good indicator of the virial velocity of the halo: \sigma_{sat}/V_{vir}=0.9 +/- 0.2. Applied to the Milky Way and M31 this gives V_{vir}^{MW}=109 +/- 22$ km/s and V_{vir}^{M31} = 138 +/- 35 km/s, respectively, substantially lower than the rotation speed of their disk components. The detailed kinematics of simulated satellites and dark matter are also in good agreement. By contrast, the stellar halo of the simulated galaxies is kinematically and spatially distinct from the population of surviving satellites. This is because the survival of a satellite depends on mass and on time of accretion; surviving satellites are biased toward low-mass systems that have been recently accreted by the galaxy. Our results support recent proposals for the origin of the systematic differences between stars in the Galactic halo and in Galactic satellites: the elusive ``building blocks'' of the Milky Way stellar halo were on average more massive, and were accreted (and disrupted) earlier than the population of dwarfs that has survived self-bound until the present.Comment: 13 pages, 11 figures, MNRAS in press. Accepted version with minor changes. Version with high resolution figures available at: http://www.astro.uvic.ca/~lsales/SatPapers/SatPapers.htm

Cosmic M\'enage \`a Trois: The Origin of Satellite Galaxies On Extreme Orbits

We examine the orbits of satellite galaxies identified in a suite of N-body/gasdynamical simulations of the formation of $L_*$ galaxies in a LCDM universe. Most satellites follow conventional orbits; after turning around, they accrete into their host halo and settle on orbits whose apocentric radii are steadily eroded by dynamical friction. However, a number of outliers are also present, we find that ~1/3 of satellites identified at $z=0$ are on unorthodox orbits, with apocenters that exceed their turnaround radii. This population of satellites on extreme orbits consists typically of the faint member of a satellite pair that has been ejected onto a highly-energetic orbit during its first approach to the primary. Since the concurrent accretion of multiple satellite systems is a defining feature of hierarchical models of galaxy formation, we speculate that this three-body ejection mechanism may be the origin of (i) some of the newly discovered high-speed satellites around M31 (such as Andromeda XIV); (ii) some of the distant fast-receding Local Group members, such as Leo I; and (iii) the oddly isolated dwarf spheroidals Cetus and Tucana in the outskirts of the Local Group. Our results suggest that care must be exercised when using the orbits of the most weakly bound satellites to place constraints on the total mass of the Local Group.Comment: 10 pages, 6 figures, MNRAS in press. Accepted version with minor changes. Version with high resolution figures available at: http://www.astro.uvic.ca/~lsales/SatPapers/SatPapers.htm

Avaliação do desempenho produtivo de bovinos de corte, em pastos puros e consorciados com o amendoim forrageiro cultivar Mandobi, no Acre.

Objetivou-se avaliar o efeito da consorciação de pastos de Brachiaria humidicola com Arachis pintoi cv. Mandobi sobre o desempenho produtivo de novilhos Nelore. O experimento foi realizado em uma fazenda particular no Estado do Acre, de novembro de 2013 a fevereiro de 2014. As unidades experimentais foram seis piquetes de 1,42 ha cada, em um delineamento inteiramente casualizado, com dois tratamentos e três repetições. Foram utilizados seis novilhos Nelore, não castrados, com idade e peso médio iniciais de 16 meses e 282 kg, como testes. Novilhos adicionais foram alocados ou retirados dos piquetes para a manutenção da altura do pasto, em 15 cm. Os animais foram pesados a cada 28 dias, após um jejum de 16 horas, para determinar o ganho de peso médio diário (GMD). A capacidade de suporte foi calculada de acordo com o peso médio e número de animais/dia em cada unidade experimental. A produtividade animal foi calculada com base no GMD dos animais teste e o número de animais/dia utilizados durante todo experimento. As médias dos quadrados mínimos foram comparadas usando o teste de Tukey com 5% de probabilidade. A taxa de lotação durante o período experimental foi de 3,97 UA/ha nos pastos consorciado e 3,81 nos pastos puros (P = 0,8255). O ganho de peso médio diário dos animais foi 17,7% superior (P = 0,0465) para o pasto consorciado (0,597 x 0,479 kg/animal/dia) e a produtividade animal aumentou 18,7% (P = 0,1010) pelo uso de A. pintoi cv. Mandobi (330 kg/ha x 278 kg/ha). Este estudo mostra que apenas 7,7% desta leguminosa em pastagens consorciadas com Brachiaria humidicola pode afetar positivamente a produtividade animal

The potential of molecular imprinting as a biosensing devices for monitoring the CEA cancer biomarker

6th Graduate Student Symposium on Molecular Imprinting6th Graduate Student Symposium on Molecular Imprinting, in Medway School of Pharmacy, Kent, UK, August 27-28, 2015Colorectal cancer is the third most common type of cancer and the major cause of the death throughout the world. Widely known, carcinoembryonic antigen (CEA) is an important tumour marker responsible for clinical diagnosis of 95% of all colon tumors1. The discovery of novel non-invasive biomarkers, as CEA, and its fast determination at low cost is presently required, to enable its use over wide screening programs and applications in point-of-care context, and, thus, its monitoring quite early. As a novel approach, this work proposes a novel support with molecular imprinted polymer (MIP) for CEA cancer biomarker based on carbon ink matrix linked by sol-gel chemistry on top of conductive glass covered by fluorine-doped tin oxide (FTO glass). In brief, the electrical biosensor was tailored on top of a disposable conductive glass electrode, following a bottom-up approach. The several stages of this process included the chemical modification of a homemade carbon ink layer and the assembly of a MIP or non-imprinted polymer (NIP) layer. The analytical performance of the obtained devices was followed by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). Chemical modifications of the surface were characterized using Fourier Transform Infrared (FTIR), and Raman spectroscopy with confocal microscopy. Overall, the MIP/FTO glass-based device displayed linear responses to CEA in EIS assays from 2.5×10-3 µg.mL-1 to 1.25 µg.mL-1 in PBS buffer, with detection limits of 2.5×10-3 µg.mL-1. Successful detection of CEA was, also, achieved in spiked samples of fetal bovine serum. In conclusion, the devices developed are a promising tool for the monitoring of CEA in a point-of-care applications, due to its detection capability below the normal physiological levels expected for this cancer biomarker, simplicity of manufacture, low-cost and good sensitivity and selectivity

Satellite Galaxies and Fossil Groups in the Millennium Simulation

We use a semianalytic galaxy catalogue constructed from the Millennium Simulation to study the satellites of isolated galaxies in the LCDM cosmogony. This sample (~80,000$ bright primaries, surrounded by ~178,000 satellites) allows the characterization, with minimal statistical uncertainty, of the dynamical properties of satellite/primary galaxy systems in a LCDM universe. We find that, overall, the satellite population traces the dark matter rather well: its spatial distribution and kinematics may be approximated by an NFW profile with a mildly anisotropic velocity distribution. Their spatial distribution is also mildly anisotropic, with a well-defined ``anti-Holmberg'' effect that reflects the misalignment between the major axis and angular momentum of the host halo. The isolation criteria for our primaries picks not only galaxies in sparse environments, but also a number of primaries at the centre of ''fossil'' groups. We find that the abundance and luminosity function of these unusual systems are in reasonable agreement with the few available observational constraints. We recover the expected L_{host} \sigma_{sat}^3 relation for LCDM models for truly-isolated primaries. Less strict primary selection, however, leads to substantial modification of the scaling relation. Our analysis also highlights a number of difficulties afflicting studies that rely on blind stacking of satellite systems to constrain the mean halo mass of the primary galaxies.Comment: 18 pages, 14 figures, MNRAS in press. Accepted version with minor changes. Version with high resolution figures available at: http://www.astro.uvic.ca/~lsales/SatPapers/SatPapers.htm

A novel printed 3-electrode system for the electrochemical detection of sulfadiazine

We thank the financial support of 3C´s – Cellulose and Cork in the Control of antibiotics in aquaculture (PTDC/AAG-TEC/5400/2014 and POCI-01-0145-FEDER-016637), to FEDER, through COMPETE2020, POCI, and FCT (Fundação para a Ciência e a Tecnologia I.P.).info:eu-repo/semantics/publishedVersio

Possible mechanism for achieving glass-like thermal conductivities in crystals with off-center atoms

In the filled Ga/Ge clathrate, Eu and Sr are off-center in site 2 but Ba is on-center. All three filler atoms (Ba,Eu,Sr) have low temperature Einstein modes; yet only for the Eu and Sr systems is there a large dip in the thermal conductivity, attributed to the Einstein modes. No dip is observed for Ba. Here we argue that it is the off-center displacement that is crucial for understanding this unexplained difference in behavior. It enhances the coupling between the "rattler" motion and the lattice phonons for the Eu and Sr systems, and turns on/off another scattering mechanism (for 1K < T < 20K) produced by the presence/absence of off-center sites. The random occupation of different off-center sites produces a high density of symmetry-breaking defects which scatters phonons. It may also be important for improving our understanding of other glassy systems.Comment: 4 pages, 1 figure (2 parts) -- v2: intro broadened; strengthened arguments regarding need for additional phonon scattering mechanis

Thermoelectric properties of Co, Ir, and Os-Doped FeSi Alloys: Evidence for Strong Electron-Phonon Coupling

The effects of various transition metal dopants on the electrical and thermal transport properties of Fe1-xMxSi alloys (M= Co, Ir, Os) are reported. The maximum thermoelectric figure of merit ZTmax is improved from 0.007 at 60 K for pure FeSi to ZT = 0.08 at 100 K for 4% Ir doping. A comparison of the thermal conductivity data among Os, Ir and Co doped alloys indicates strong electron-phonon coupling in this compound. Because of this interaction, the common approximation of dividing the total thermal conductivity into independent electronic and lattice components ({\kappa}Total = {\kappa}electronic + {\kappa}lattice) fails for these alloys. The effects of grain size on thermoelectric properties of Fe0.96Ir0.04Si alloys are also reported. The thermal conductivity can be lowered by about 50% with little or no effect on the electrical resistivity or Seebeck coefficient. This results in ZTmax = 0.125 at 100 K, still about a factor of five too low for solid-state refrigeration applications

Development of an innovative flexible paper-based methanol fuel cell (PB-DMFC) sensing platform application to sarcosine detection

This work describes for the first time a paper-based direct methanol fuel cell platform (PB-DMFC) that functions as an energy source and biosensor, assembled on a simple paper substrate for point-of-care (POC) applications, targeting sarcosine as proof-of-concept. Specifically, a methanol fuel cell strip was developed from a square of Whatman paper, acting as substrate. The paper strip was treated with an impermeable agent (paraffin solution) and supported all fuel cell device components, including the electrolyte (Nafion®), anode electrode (carbon black Pt/Ru), cathode electrode (carbon black Pt), and current collectors (silver edges). All the described components formed a flexible single layer that operated in a completely passive mode by adding few microliters of a methanol solution on the anode side and by using atmospheric oxygen on the cathode side. The obtained platform had a stable electrical signal with an average OCV value of 0.45-0.55V and a maximum power density of 20-50µW/cm2, depending on the methanol concentration used (0.5M 2M). A sensing layer was built in situ on the anode electrode by electropolymerization of a solution of 3,4-ethylenedioxythiophene (EDOT) and pyrrole (Py) as monomers. The obtained PB-DMFC/biosensor was calibrated at room temperature in buffer and healthy human urine and showed linear responses from 1.0×10-7 to 1.0×10-3M with a detection limit of 6.6×10-8M. Selectivity studies evidenced signals changing within 1-10%, both in positive and negative directions. Results evidenced good reproducibility. Overall, the obtained results demonstrate a self-sufficient biosensor for the detection of sarcosine consisting of an innovative paper-based methanol fuel cell strip. This concept can open new horizons for massification of biosensors even in places with energy shortage.The authors acknowledge the financial support of EU-Horizon 2020 (Symbiotic, FET-Open, GA665046) and LPTC (Grant references: SFRH/BD/122954/2016; COVID/BD/151738/2021) acknowledges Fundação para a Ciência e Tecnologia (FCT) for financial support. This work was also financially supported by LA/P/0045/2020 (ALiCE), UIDB/00532/2020 and UIDP/00532/2020 (CEFT), funded by national funds through FCT/MCTES (PIDDAC).info:eu-repo/semantics/publishedVersio