Charge Transport in High-Mobility Field-Effect Transistors Based on Inkjet Printed Random Networks of Polymer Wrapped Single-Walled Carbon Nanotubes

Printed random networks of polymer-wrapped multi-chiral semiconducting carbon nanotubes (s-SWCNTs) are an opportunity for mass-manufacturable, high-performance large-area electronics. To meet this goal, a deeper understanding of charge-transport mechanisms in such mixed networks is crucial. Here, charge transport in field-effect transistors based on inkjet-printed s-SWCNTs networks is investigated, obtaining direct evidence for the phases probed by charge in the accumulated channel, which is critical information to rationalize the different transport properties obtained for different printing conditions. In particular, when the fraction of nanotubes with smaller bandgaps is efficiently interconnected, the sparse network provides efficient charge percolation for band-like transport, with a charge mobility as high as 20.2 cm(2) V-1 s(-1). However, when the charges are forced by a less efficient morphology, to populate also higher bandgap nanotubes and and/or the wrapping polymer, thermally activated transport takes place and mobility drops. As a result, a trade-off between network density and charge transport properties is identified for device current optimization, in both p- and n-type regimes. These findings shed light on the fundamental aspects related to charge transport in printed s-SWCNT mixed networks and contribute to devise appropriate strategies for the formulation of inks and processes towards cost-effective mass production schemes of high-performance large-area electronics

Solution-Processed Polymer Dielectric Interlayer for Low-Voltage, Unipolar n-Type Organic Field-Effect Transistors

The integration of organic electronic circuits into real-life applications compels the fulfillment of a range of requirements, among which the ideal operation at a low voltage with reduced power consumption is paramount. Moreover, these performance factors should be achieved via solution-based fabrication schemes in order to comply with the promise of cost- and energy-efficient manufacturing offered by an organic, printed electronic technology. Here, we propose a solution-based route for the fabrication of low-voltage organic transistors, encompassing ideal device operation at voltages below 5 V and exhibiting n-type unipolarization. This process is widely applicable to a variety of semiconducting and dielectric materials. We achieved this through the use of a photo-cross-linked, low-k dielectric interlayer, which is used to fabricate multilayer dielectric stacks with areal capacitances of up to 40 nF/cm2 and leakage currents below 1 nA/cm2. Because of the chosen azide-based cross-linker, the dielectric promotes n-type unipolarization of the transistors and demonstrated to be compatible with different classes of semiconductors, from conjugated polymers to carbon nanotubes and low-temperature metal oxides. Our results demonstrate a general applicability of our unipolarizing dielectric, facilitating the implementation of complementary circuitry of emerging technologies with reduced power consumption.</p

Polymer-Nanocarbon Topological and Electronic Interface

The electronic structure of semiconducting carbon nanotubes selected through polymer functionalization is routinely verified by measuring the spectral van Hove singularity signature under ultraclean vacuum conditions. Interpreting the effect of unperturbed polymer adsorption on the nanotube energetic bands in solvent media is experimentally challenging owing to solvent molecular crowding around the hybrid complex. Here, a liquid-based scanning tunneling microscope and spectroscope operating in a noise free laboratory is used to resolve the polymer-semiconducting carbon-nanotube-underlying graphene heterostructure in the presence of encompassing solvent molecules. The spectroscopic measurements highlight the role of polymer packing and graphene landscape on the electronic shifts induced in the nanotube energy bands. Together with molecular dynamics simulations, our experimental findings emphasize the necessity of recording physicochemical and electronic properties of liquid phase solubilized hybrid materials in their native state

Inkjet Printed Single-Walled Carbon Nanotube Based Ambipolar and Unipolar Transistors for High-Performance Complementary Logic Circuits

Inkjet printed single walled carbon nanotubes (SWCNT) field-effect transistors with mobilities of 15 and 7 cm(2) V-1 s(-1) for holes and electrons, respectively, and high on-off ratio, are demonstrated. The high loading of the ink formulation and high electronic quality of the sorted SWCNT enable facile printing of networks displaying high coverage and effective mobility already after a single printing pass. Balanced ambipolarity or mainly unipolar behavior can be tuned by simply varying the number of printing passes, thus enabling the realization of high-performance complementary-like logic gates

Real-Time Monitoring of Cellular Cultures with Electrolyte-Gated Carbon Nanotube Transistors

Cell-based biosensors constitute a fundamental tool in biotechnology, and their relevance has greatly increased in recent years as a result of a surging demand for reduced animal testing and for high-throughput and cost-effective in vitro screening platforms dedicated to environmental and biomedical diagnostics, drug development and toxicology. In this context, electrochemical/electronic cell-based biosensors represent a promising class of devices that enable long-term and real-time monitoring of cell physiology in a non-invasive and label-free fashion, with a remarkable potential for process automation and parallelization. Common limitations of this class of devices at large include the need for substrate surface modification strategies to ensure cell adhesion and immobilization, limited compatibility with complementary optical cell-probing techniques, and need for frequency-dependent measurements, which rely on elaborated equivalent electrical circuit models for data analysis and interpretation. We hereby demonstrate the monitoring of cell adhesion and detachment through the time-dependent variations in the quasi-static characteristic current curves of a highly stable electrolyte-gated transistor, based on an optically transparent network of printable polymer-wrapped semiconducting carbon-nanotubes

Customizing the Polarity of Single-Walled Carbon-Nanotube Field-Effect Transistors Using Solution-Based Additives

Polarity control in semiconducting single-walled carbon-nanotube field-effect transistors (s-SWNT FETs) is important to promote their application in logic devices. The methods to turn the intrinsically ambipolar s-SWNT FETs into unipolar devices that have been proposed until now require extra fabrication steps that make preparation longer and more complex. It is demonstrated that by starting from a highly purified ink of semiconducting single-walled carbon nanotubes sorted by a conjugated polymer, and mixing them with additives, it is possible to achieve unipolar charge transport. The three additives used are benzyl viologen (BV), 4-(2,3-dihydro-1,3-dimethyl-1H-benzimidazol-2-yl)-N,N-dimethylbenzenamine (N-DMBI), which give rise to n-type field-effect transistors, and 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F-4-TCNQ) which gives rise to p-type transistors. BV and N-DMBI transform the s-SWNTs transistors from ambipolar with mobility of the order of 0.7 cm(2) V-1 s(-1) to n-type with mobility up to 5 cm(2) V-1 s(-1). F-4-TCNQ transform the ambipolar transistors in p-type with mobility up to 16 cm(2) V-1 s(-1)

Enhancing Quantum Dot Solar Cells Stability with a Semiconducting Single-Walled Carbon Nanotubes Interlayer Below the Top Anode

Semiconducting single-walled carbon nanotubes (s-SWNTs) are used as a protective interlayer between the lead sulfide colloidal quantum dot (PbS CQD) active layer and the anode of the solar cells (SCs). The introduction of the carbon nanotubes leads to increased device stability, with 85% of the initial performance retained after 100 h exposure to simulated solar light in ambient condition. This is in sharp contrast with the behavior of the device without s-SWNTs, for which the photoconversion efficiency, the open circuit voltage, the short-circuit current, and the fill factor all experiencing a sharp decrease. Therefore, the inclusion of s-SWNT as interlayer in CQD SCs, give rise to SCs of identical efficiency (above 8.5%) and prevents their performance degradation

Carbon Nanotube Network Ambipolar Field-Effect Transistors with 10(8) On/Off Ratio

Polymer wrapping is a highly effective method of selecting semiconducting carbon nanotubes and dispersing them in solution. Semi-aligned semiconducting carbon nanotube networks are obtained by blade coating, an effective and scalable process. The field-effect transistor (FET) performance can be tuned by the choice of wrapping polymer, and the polymer concentration modifies the FET transport characteristics, leading to a record on/off ratio of 108

Understanding the Selection Mechanism of the Polymer Wrapping Technique toward Semiconducting Carbon Nanotubes

Noncovalent functionalization of single-walled carbon nanotubes (SWNTs) using π-conjugated polymers has become one of the most effective techniques to select semiconducting SWNTs (s-SWNTs). Several conjugated polymers are used, but their ability to sort metallic and semiconducting species, as well as the dispersions yields, varies as a function of their chemical structure. Here, three polymers are compared, namely, poly[2,6-(4,4-bis-(2-dodecyl)-4H-cyclopenta[2,1-b;3,4b′]dithiophene)-alt-4,7(2,1,3-ben-zothiadiazole)] (P12CPDTBT), poly(9,9-di-n-dodecylfluorenyl-2,7-diyl) (PF12), and poly(3-dodecylthiophene-2,5-diyl) (P3DDT) in their ability to select two types of carbon nanotubes comprising small (≈1 nm) and large (≈1.5 nm) diameters. P12CPDTBT is a better dispersant than PF12 for small diameter nanotubes, while both polymers are good dispersants of large diameter nanotubes. However, these dispersions contain metallic species. P3DDT, instead presents the best overall performance regarding the selectivity toward semiconducting species, with a dispersion yield for s-SWNTs of 15% for small and 21% for large diameter nanotubes. These results are rationalized in terms of electronic and chemical structure showing that: (i) the binding energy is stronger when more alkyl lateral chains adsorb on the nanotube surface; (ii) the binding energy is stronger when the polymer backbone is more flex-ible; (iii) the purity of the dispersions seems to depend on a strong polymer– nanotube interaction

Canagliflozin and renal outcomes in type 2 diabetes and nephropathy

BACKGROUND Type 2 diabetes mellitus is the leading cause of kidney failure worldwide, but few effective long-term treatments are available. In cardiovascular trials of inhibitors of sodium–glucose cotransporter 2 (SGLT2), exploratory results have suggested that such drugs may improve renal outcomes in patients with type 2 diabetes. METHODS In this double-blind, randomized trial, we assigned patients with type 2 diabetes and albuminuric chronic kidney disease to receive canagliflozin, an oral SGLT2 inhibitor, at a dose of 100 mg daily or placebo. All the patients had an estimated glomerular filtration rate (GFR) of 30 to &lt;90 ml per minute per 1.73 m2 of body-surface area and albuminuria (ratio of albumin [mg] to creatinine [g], &gt;300 to 5000) and were treated with renin–angiotensin system blockade. The primary outcome was a composite of end-stage kidney disease (dialysis, transplantation, or a sustained estimated GFR of &lt;15 ml per minute per 1.73 m2), a doubling of the serum creatinine level, or death from renal or cardiovascular causes. Prespecified secondary outcomes were tested hierarchically. RESULTS The trial was stopped early after a planned interim analysis on the recommendation of the data and safety monitoring committee. At that time, 4401 patients had undergone randomization, with a median follow-up of 2.62 years. The relative risk of the primary outcome was 30% lower in the canagliflozin group than in the placebo group, with event rates of 43.2 and 61.2 per 1000 patient-years, respectively (hazard ratio, 0.70; 95% confidence interval [CI], 0.59 to 0.82; P=0.00001). The relative risk of the renal-specific composite of end-stage kidney disease, a doubling of the creatinine level, or death from renal causes was lower by 34% (hazard ratio, 0.66; 95% CI, 0.53 to 0.81; P&lt;0.001), and the relative risk of end-stage kidney disease was lower by 32% (hazard ratio, 0.68; 95% CI, 0.54 to 0.86; P=0.002). The canagliflozin group also had a lower risk of cardiovascular death, myocardial infarction, or stroke (hazard ratio, 0.80; 95% CI, 0.67 to 0.95; P=0.01) and hospitalization for heart failure (hazard ratio, 0.61; 95% CI, 0.47 to 0.80; P&lt;0.001). There were no significant differences in rates of amputation or fracture. CONCLUSIONS In patients with type 2 diabetes and kidney disease, the risk of kidney failure and cardiovascular events was lower in the canagliflozin group than in the placebo group at a median follow-up of 2.62 years