Effect of Practical Training on Engineering Education

The laboratory training is one of the most important methods of the distinctive and fundamental role that stimulate the skills of creative scientific thinking and develop deductive and critical thinking to cope with the scientific developments and technological progress in the world. Therefore, it has been found that many researchers conducted at different levels of learners pointed to the importance of the inclusion of this type of teaching methods, Which makes the learner in direct contact with the artificial environment simulates what is happening in the laboratories and factories and areas of work related to their competence after graduation, which leads the student to be able to link the theoretical information received in the theoretical lesson with the information in the scientific laboratory. In this statistical work has been conducted for two categories of students, the first category was subjected to the experiment of scientific laboratories) scientific laboratories (to support the theoretical approach, and the second category is students who have been absent or not attended scientific laboratories so they did not acquire the skills of applied scientific work .it was found that clear differences between the two categories, where the first group responded positively to the theoretical test and a higher success rate compared to the second category. This study was conducted to evaluate the effect of the scientific laboratory (specifically the experimental laboratory) on the academic performance of undergraduate students (junior and senior) of the Chemical Engineering Department at the University of Technology in Baghdad, For the academic year 2017-2018. The number of students ranged from 24 to 26 students

Formulation and in vitro evaluation of meloxicam as a self-microemulsifying drug delivery system [version 2; peer review: 2 approved]

Background: The nonsteroidal anti-inflammatory medication meloxicam (MLX) belongs to the oxicam family and is used to reduce inflammation and pain. The aim of this study was to improve MLX's dispersibility and stability by producing it as a liquid self-microemulsifying drug delivery system since it is practically insoluble in water. Methods: Five different formulations were made by adjusting the amounts of propylene glycol, Transcutol P, Tween 80, and oleic acid oil and establishing a pseudo-ternary diagram in ratios of 1:1, 1:2, 1:3, 1:4, and 3:4, respectively. All of the prepared formulations were tested for a variety of properties, including thermodynamic stability, polydispersity index, particle size distributions, dilution resistance, drug contents, dispersibility, in vitro solubility of the drug, and emulsification time. Results: F5 was chosen as the optimal MLX liquid self-microemulsion due to its higher drug content (99.8%), greater in vitro release (100% at 40 min), smaller droplet size (63 nm), lower polydispersity index (PDI) value (0.3), and higher stability (a zeta potential of -81 mV). Conclusions: According to the data provided here, the self-microemulsifying drug delivery system is the most practical method for improving the dispersibility and stability of MLX

Enhancement of Ozonation Reaction for Efficient Removal of Phenol from Wastewater Using a Packed Bubble Column Reactor

In the ozonation process, the phenol degradation in wastewater undergoes a low mass transfer mechanism. In this study, ozonized packed bubble column reactor was designed and constructed to remove phenol. The reactor’s inner diameter and height were 150 and 8 cm, respectively. The packing height was kept constant at 1 m in accordance with the reactor hydrodynamics. The gas distributor was designed with 55 holes of 0.5 mm. The phenol removal efficiency was evaluated at ozone concentrations of 10, 15, and 20 mg/L, contact times of 15, 30, 45, 60, 75, 90, 105, and 120 min, and phenol concentrations of 3, 6, 9, 12, and 15 mg/L. The results indicated that the highest phenol removal efficiency of 100% was achieved at 30 min in presence of packing. Moreover, the use of packing improved the contact between the gas and liquid, which significantly enhanced the phenol degradation. Actually, a thin film over a packing surface enhances the mass transfer. Also, it was found that the phenol is degraded into CO2 and H2O through a series of reaction steps. Additionally, a kinetic study of a first-order reaction provided an efficient estimation of reaction parameters with a correlation factor of 0.997

Alleviation of diabetic nephropathy by zinc oxide nanoparticles in streptozotocin‐induced type 1 diabetes in rats

Abstract This study examines the effect of nanoparticles with zinc oxides (ZnONPs) on diabetic nephropathy, which is the primary cause of mortality for diabetic patients with end‐stage renal disease. Diabetes in adult male rats was induced via intraperitoneal injection of streptozotocin. ZnONPs were intraperitoneally administered to diabetic rats daily for 7 weeks. Diabetes was associated with increases in blood glucose level, 24‐h urinary albumin excretion rate, glomerular basement membrane thickness, renal oxidative stress markers, and renal mRNA or protein expression of transforming growth factor‐β1, fibronectin, collagen‐IV, tumour necrosis factor‐α and vascular endothelial growth factor‐A. Moreover, the expression of nephrin and podocin, and the mRNA expression of matrix metalloproteinase‐9 were decreased in the diabetic group. These changes were not detected in the control group and were significantly prevented by ZnONP treatment. These results provide evidence that ZnONPs ameliorate the renal damage induced in a diabetic rat model of nephropathy through improving renal functionality; inhibiting renal fibrosis, oxidative stress, inflammation and abnormal angiogenesis; and delaying the development of podocyte injury. The present findings may help design the clinical application of ZnONPs for protection against the development of diabetic nephropathy

The role of TiO2 NPs catalyst and packing material in removal of phenol from wastewater using an ozonized bubble column reactor

Phenol is present as a highly toxic pollutant in wastewater, and it has a dangerous impact on the environment. In the present research, the phenol removal from wastewater has been achieved using four treatment methods in a bubble column reactor (treatment by ozone only, using packed bubble column reactor with ozone, utilizing ozone with TiO2 NPs catalyst in the reactor without packing, and employing ozone with TiO2 NPs in the presence of packing). The effects of phenol concentration, ozone dosage, TiO2 NPs additions, and contact time on the phenol removal efficiency were determined. It was found that at a contact time of 30 min, the phenol removal was 60.4, 74.9, 86.0, and 100% for the first, second, third, and fourth methods, respectively. The results indicated that the phenol degradation method using catalytic ozonation in a packed bubble column with TiO2 NPs is the best treatment method. This study demonstrated the advantages of using packing materials in a bubble column reactor to enhance the mass transfer process in an ozonation reaction and then increase the phenol removal efficiency. Also, the presence of TiO2 NPs as a catalyst improves the ozonation process via the production of hydroxyl routs. Additionally, the reaction kinetics of ozonation reaction manifested that the first order model is more applicable for the reaction. Eventually, the packed bubble column reactor in the presence of TiO2 NPs catalyst provided a highperformance removal of phenol with a high economic feasibility

Oral Potentially Malignant Disorders and Oral Cancer in Saudi Arabia: An Epidemiological Review of the Literature

Background: Oral potentially malignant disorders (OPMDs) are a group of chronic oral mucosal diseases associated with an increased risk of malignant transformation. Multiple studies have investigated the prevalence of these conditions in multiple regions; however, there are limited data about the prevalence of OPMDs in the Kingdom of Saudi Arabia (KSA). This paper aims to review the prevalence of OPMDs in the KSA, to ensure better understanding of the population risk and propose a more standardised approach to the diagnosis and management of this group across the KSA. In addition, this review will discuss the prevalence of oral cancer in the KSA, considering independent risk factors for oral cancer development. Methods: Electronic databases including PubMed, Medline, Medscape, ScienceDirect, StatPearls, BMC Oral Health and the Cochrane Library were searched with the keywords “Oral Potentially Malignant Disorders”; “Saudi Arabia”; and “Oral Cancer”. Identified articles were reviewed independently by 2 reviewers against defined inclusion and exclusion criteria. Results: 16 studies were included in this review. The prevalence of OPMDs in KSA varies significantly depending on age, gender, social habits, background disease and dental status. Conclusions: This review highlights the need for up-to-date data on the prevalence, distribution, and characteristics of OPMDs in KSA. The diverse prevalence rates and distinct characteristics of various OPMDs emphasise the necessity for targeted preventive measures. As the data on OPMDs in KSA remains limited, future research efforts should prioritise the establishment of comprehensive epidemiological studies to inform effective public health interventions in this region

Anticholinergic burden risk and prevalence of medications carrying anticholinergic properties in elderly cancer patients in Jordan

Background: Geriatric cancer patients are susceptible to adverse drug events due to the complexity of their chemotherapy regimens and collateral treatments for their comorbid conditions. Prescribing medications with anticholinergic burden characteristics can complicate their condition, leading to negative impacts on their health outcomes and quality of life, including an increase in adverse drug event frequency, physical and cognitive impairments. Objective: This study aims to examine the prevalence of anticholinergic prescribing and identify the cumulative anticholinergic load risk associated with drugs prescribed to elderly cancer patients. Also, to identify the predictors that might lead to raised anticholinergic burden in these patients. Methodology: This retrospective cross-sectional study included elderly patients (age ≥ 65) diagnosed with cancer and admitted to the adult oncology unit at King Abdullah University Hospital (KAUH) in Jordan during the period between (January 1st, 2019, and January 1st, 2022). The medication charts of 420 patients were evaluated for study outcomes. Results: Of the total subjects, females represented 49.3%, and the average age was 72.95 (SD = 7.33). A total of 354 (84.3%) patients were prescribed at least one drug carrying anticholinergic burden properties. Median for anticholinergic medications was 3 (IQR = 4). Our study found that 194 (46.2%) patients were at a high risk of adverse events associated with anticholinergic load (cumulative score ≥ 3). Metoclopramide, furosemide, and tramadol were the most frequently prescribed drugs with anticholinergic properties. Alimentary tract drugs with anticholinergic action were the most commonly encountered items in our study population. Conclusion: Our study revealed a significantly high prevalence of anticholinergic prescribing among elderly cancer patients. Nearly half of the patients were at high risk of developing serious effects related to anticholinergic activity from the drugs administered. Polypharmacy was strongly associated with increased anticholinergic burden score. Evidence-based recommendations utilizing prescribing strategies for safer alternatives and deprescribing of inappropriate medications could reduce such inappropriate prescribing

Experimental and Numerical Investigation of the Silicon Particle Distribution in Electrospun Nanofibers

International audienceThe properties of ceramic materials are dependent on crystal size and their distribution. These parameters can be controlled using electrospinning of the two/phase mixed system. The pre/ ceramic solution consists of silicon nano/particles and polyacrylonitrile (PAN) polymer mixture. Particles distribution during the electrospinning technique was characterized using TEM microscopy and modeled using Finite Element Method (FEM). The experimental and numerical results were in agreement. Large silicon particles were located in the skin and the smaller ones were located at the core. This illustrated by the migration rate from the core which was the fastest for large particles and it diminished as the particles become smaller in size. The threshold for Stokes number was found to be around 2.2E-4 with a critical particle size of 1.0E7 m in diameter. The current results are very promising, as it demonstrated a novel way for the fabrication of PAN/Si ceramic nano/fibers with a gradient of particle size and properties from the skin to the core