Control of interconnected mechanical systems

In this paper control systems design approach, based on siding mode methods, that allows maintain some functional relation – like bilateral or multilateral systems, establishment of virtual relation among mobile robots or control of haptic systems - is presented. It is shown that all basic motion control problems - trajectory tracking, force control, hybrid position/force control scheme and the impedance control for the interacting systems- can be treated in the same way while avoiding the structural change of the controller and guarantying stable behavior of the system In order to show applicability of the proposed techniques simulation and experimental results for high precision systems in microsystems assembly tasks are presented.

Robust motion control SMC point of view

In this paper the robust motion control systems in the sliding mode framework are discussed. Due to the fact that a motion control system with n d.o.f may be mathematically formulated in a unique way as a system composed of n second order systems, design of such a system may be formulated in a unique way as a requirement that the generalized coordinates must satisfy certain algebraic constraint. Such a formulation leads naturally to sliding mode framework to be applied. In this approach constraint manifolds are selected to coincide with desired constraints on the generalized coordinates. It has been shown that the CMC can be interpreted as a realization of the acceleration controller thus possessing all robust properties of the acceleration controller framework. The possibility to treat both unconstrained motion (the motion without contact with environment) and constrained motion in the same way is shown

Sliding modes in power electronics and motion control

In the paper the general approach to motion control systems in the sliding mode framework is discussed in details. It has been shown that, due to the fact that a motion control system with n d.o.f may be mathematically formulated in a unique way as a system composed on n 2 d.o.f systems, design of such a system may be formulated in a unique way as a requirement that the generalized coordinates must satisfy certain algebraic constrain. Such a formulation leads naturally to sliding mode methods to be applied where sliding mode manifolds are selected to coincide with desired constraints on the generalized coordinates. In addition to the above problem the design of full observer for IM based drive is discussed

Motion control - A SMC approach

Motion control involves many diversified control problems of complex nonlinear systems. In this paper we will be addressing the SMC approach for multi-body mechanical systems control. The main feature of the SMC is constraint of the system motion into manifold in system state space. It will be shown that usage of the SMC methods is a natural way of addressing problems in motion control including constrained systems, redundant systems and functionally related systems to name some. The consistent application of the SMC methods leads to natural decomposition of system motion for redundant tasks and allows simple, straight forward dynamical decoupling of the multiple tasks

Continuous time controller based on SMC and disturbance observer for piezoelectric actuators

Abstract – In this work, analog application for the Sliding Mode Control (SMC) to piezoelectric actuators (PEA) is presented. DSP application of the algorithm suffers from ADC and DAC conversions and mainly faces limitations in sampling time interval. Moreover piezoelectric actuators are known to have very large bandwidth close to the DSP operation frequency. Therefore, with the direct analog application, improvement of the performance and high frequency operation are expected. Design of an appropriate SMC together with a disturbance observer is suggested to have continuous control output and related experimental results for position tracking are presented with comparison of DSP and analog control application

Discrete-time sliding mode control of high precision linear drive using frictional model

The paper deals with high precision motion control of linear drive system. The accuracy and behavior of the linear drive system are highly affected by the non-linear frictional component compromising of stiction, viscous and stribeck effect present in the system especially in the vicinity of zero velocity. In order to achieve the high accuracy and motion it is mandatory to drive our system with low velocity resulting in many non linear phenomena like tracking error, limit cycles and undesired stick-slip motion etc. This paper discuss the design and implementation of discrete time sliding mode control along with the implementation of dynamic frictional model in order to estimate and compensate the disturbance arising due to frictional component. Experimental results are presented to illustrate the effectiveness and achievable control performance of the proposed scheme

Semi-autonomous scheme for pushing micro-objects

-In many microassembly applications, it is often desirable to position and orient polygonal micro-objects lying on a planar surface. Pushing micro-objects using point contact provides more flexibility and less complexity compared to pick and place operation. Due to the fact that in micro-world surface forces are much more dominant than inertial forces and these forces are distributed unevenly, pushing through the center of mass of the micro-object will not yield a pure translational motion. In order to translate a micro-object, the line of pushing should pass through the center of friction. In this paper, a semi-autonomous scheme based on hybrid vision/force feedback is proposed to push microobjects with human assistance using a custom built telemicromanipulation setup to achieve pure translational motion. The pushing operation is divided into two concurrent processes: In one process human operator who acts as an impedance controller alters the velocity of the pusher while in contact with the micro-object through scaled bilateral teleoperation with force feedback. In the other process, the desired line of pushing for the micro-object is determined continuously using visual feedback procedures so that it always passes through the varying center of friction. Experimental results are demonstrated to prove nanoNewton range force sensing, scaled bilateral teleoperation with force feedback and pushing microobjects

Sliding-mode control of a flexure based mechanism using piezoelectric actuators

The position control of designed 3 PRR flexure based mechanism is examined in this paper. The aims of the work are to eliminate the parasitic motions of the stage, misalignments of the actuators, errors of manufacturing and hysteresis of the system by having a redundant mechanism with the implementation of a sliding mode control and a disturbance observe. x-y motion of the end-effector is measured by using a laser position sensor and the necessary references for the piezoelectric actuators are calculated using the pseudo inverse of the transformation matrix coming from the experimentally determined kinematics of the mechanism. The effect of the observer and closed loop control is presented by comparing the results with open loop control. The system is designed to be redundant to enhance the position control. In order to see the effects of the redundant system firstly the closed loop control for active 2 piezoelectric actuators experiments then for active 3 piezoelectric actuators experiments are presented. As a result, our redundant mechanism tracks the desired trajectory accurately and its workspace is bigger

Sensorless action-reaction-based residual vibration suppression for multi-degree-of-freedom flexible systems

This paper demonstrates the feasibility of controlling motion and vibration of a class of flexible systems with inaccessible or unknown outputs through measurements taken from their actuators which are used as single platforms for measurements, whereas flexible dynamical systems are kept free from any attached sensors. Based on the action reaction law of dynamics, the well-known disturbance observer is used to determine the incident reaction forces from these dynamical systems on the interface planes with their actuators. Reaction forces are considered as feedback-like signals that can be used as alternatives to the inaccessible system outputs. The sensorless action reaction based motion and vibration control technique is implemented on a flexible system with finite modes and all results are verified experimentally

An Energy-Based State Observer for Dynamical Subsystems with Inaccessible State Variables

This work presents an energy-based state estimation formalism for a class of dynamical systems with inaccessible/ unknown outputs, and systems at which sensor utilization is impractical, or when measurements can not be taken. The power-conserving physical interconnections among most of the dynamical subsystems allow for power exchange through their power ports. Power exchange is conceptually considered as information exchange among the dynamical subsystems and further utilized to develop a natural feedback-like information from a class of dynamical systems with inaccessible/unknown outputs. This information is used in the design of an energybased state observer. Convergence stability of the estimation error for the proposed state observer is proved for systems with linear dynamics. Furthermore, robustness of the convergence stability is analyzed over a range of parameter deviation and model uncertainties. Experiments are conducted on a dynamical system with a single input and multiple inaccessible outputs (Fig. 1) to demonstrate the validity of the proposed energybased state estimation formalism