40,325 research outputs found
Improved decision support for engine-in-the-loop experimental design optimization
Experimental optimization with hardware in the loop is a common procedure in engineering and has been the subject of intense development, particularly when it is applied to relatively complex combinatorial systems that are not completely understood, or where accurate modelling is not possible owing to the dimensions of the search space. A common source of difficulty arises because of the level of noise associated with experimental measurements, a combination of limited instrument precision, and extraneous factors. When a series of experiments is conducted to search for a combination of input parameters that results in a minimum or maximum response, under the imposition of noise, the underlying shape of the function being optimized can become very difficult to discern or even lost. A common methodology to support experimental search for optimal or suboptimal values is to use one of the many gradient descent methods. However, even sophisticated and proven methodologies, such as simulated annealing, can be significantly challenged in the presence of noise, since approximating the gradient at any point becomes highly unreliable. Often, experiments are accepted as a result of random noise which should be rejected, and vice versa. This is also true for other sampling techniques, including tabu and evolutionary algorithms.
After the general introduction, this paper is divided into two main sections (sections 2 and 3), which are followed by the conclusion. Section 2 introduces a decision support methodology based upon response surfaces, which supplements experimental management based on a variable neighbourhood search and is shown to be highly effective in directing experiments in the presence of a significant signal-to-noise ratio and complex combinatorial functions. The methodology is developed on a three-dimensional surface with multiple local minima, a large basin of attraction, and a high signal-to-noise ratio.
In section 2, the methodology is applied to an automotive combinatorial search in the laboratory, on a real-time engine-in-the-loop application. In this application, it is desired to find the maximum power output of an experimental single-cylinder spark ignition engine operating under a quasi-constant-volume operating regime. Under this regime, the piston is slowed at top dead centre to achieve combustion in close to constant volume conditions.
As part of the further development of the engine to incorporate a linear generator to investigate free-piston operation, it is necessary to perform a series of experiments with combinatorial parameters. The objective is to identify the maximum power point in the least number of experiments in order to minimize costs. This test programme provides peak power data in order to achieve optimal electrical machine design.
The decision support methodology is combined with standard optimization and search methods – namely gradient descent and simulated annealing – in order to study the reductions possible in experimental iterations. It is shown that the decision support methodology significantly reduces the number of experiments necessary to find the maximum power solution and thus offers a potentially significant cost saving to hardware-in-the-loop experi- mentation
Apparatus and method for generating large mass flow of high temperature air at hypersonic speeds
High temperature, high mass air flow and a high Reynolds number test air flow in the Mach number 8-10 regime of adequate test flow duration is attained by pressurizing a ceramic-lined storage tank with air to a pressure of about 100 to 200 atmospheres. The air is heated to temperatures of 7,000 to 8,000 R prior to introduction into the tank by passing the air over an electric arc heater means. The air cools to 5,500 to 6,000 R while in the tank. A decomposable gas such as nitrous oxide or a combustible gas such as propane is injected into the tank after pressurization and the heated pressurized air in the tank is rapidly released through a Mach number 8-10 nozzle. The injected gas medium upon contact with the heated pressurized air effects an exothermic reaction which maintains the pressure and temperature of the pressurized air during the rapid release
Maintenance and operation of the multispectral data collection and reproduction facilities of the Willow Run Laboratories
The accomplishments in multispectral mapping during 1970 and (fiscal year) 1971 are presented. The mapping was done with the instrumented C-47 aircraft owned and operated by Willow Run Laboratories of The University of Michigan. Specific information for flight operations sponsored by NASA/MSC (Manned Spacecraft Center) in 1970 and fiscal year 1971 is presented, and a total listing of flights for 1968, 1969, 1970, and fiscal year 1971 is included in the appendices. The data-collection and reproduction facilities are described
Numerical and experimental studies of the natural convection within a horizontal cylinder
Numerical solutions are obtained for the quasi-compressible Navier-Stokes equations governing the time-dependent natural convection within a horizontal cylinder. The early flow development and wall heat transfer are obtained after a uniformly cold wall is imposed as a boundary condition on the cylinder. Results are also obtained for a time-varying cold wall as a boundary condition with windward explicit differencing used for the numerical solutions. The viscous truncation error associated with this scheme is controlled so that first-order accuracy is maintained in time and space. Experiments within a small-scale instrumented horizontal cylinder revealed the time development of the temperature distribution across the boundary layer as well as the decay of wall heat transfer with time. Agreement between temperature distributions obtained experimentally and numerically was generally good. The time decay of the dimensionless ratio of the Nusselt number to the one-fourth power of the Grashof number is found both numerically and experimentally, and good agreement is obtained between these two results over most of the cylinder wall
Experimental results of high-current arcs driven supersonically in straight and circular channels
High current electric arc characteristics magnetically driven to supersonic velocities in straight and circular channel
Baroclinic Vorticity Production in Protoplanetary Disks; Part I: Vortex Formation
The formation of vortices in protoplanetary disks is explored via
pseudo-spectral numerical simulations of an anelastic-gas model. This model is
a coupled set of equations for vorticity and temperature in two dimensions
which includes baroclinic vorticity production and radiative cooling. Vortex
formation is unambiguously shown to be caused by baroclinicity because (1)
these simulations have zero initial perturbation vorticity and a nonzero
initial temperature distribution; and (2) turning off the baroclinic term halts
vortex formation, as shown by an immediate drop in kinetic energy and
vorticity. Vortex strength increases with: larger background temperature
gradients; warmer background temperatures; larger initial temperature
perturbations; higher Reynolds number; and higher resolution. In the
simulations presented here vortices form when the background temperatures are
and vary radially as , the initial vorticity
perturbations are zero, the initial temperature perturbations are 5% of the
background, and the Reynolds number is . A sensitivity study consisting
of 74 simulations showed that as resolution and Reynolds number increase,
vortices can form with smaller initial temperature perturbations, lower
background temperatures, and smaller background temperature gradients. For the
parameter ranges of these simulations, the disk is shown to be convectively
stable by the Solberg-H{\o}iland criteria.Comment: Originally submitted to The Astrophysical Journal April 3, 2006;
resubmitted November 3, 2006; accepted Dec 5, 200
Barriers to women in the UK construction industry
Purpose – This paper aims to identify the main barriers that lead to the under-representation of women in the UK construction industry. The study, funded by ConstructionSkills, seeks to explore the issues that women face and investigate the potential positive impact that continuous professional development (CPD) may have upon improving the retention and career progression of women.
Design/methodology/approach – The study uses an open-ended grounded theory (GT) approach, including 231 semi-structured questionnaires and nine focus groups with women from a range of professional occupations. All the findings were analysed using keyword analysis to identify the top two barriers that women face, alongside a series of cross-cutting key themes and issues.
Findings – The findings reveal that male-dominated organisational cultures and inflexible working practices are the main barriers to women in the UK construction industry, irrespective of job role or profession. This paper concludes by arguing for a sea-change in the expansion of CPD opportunities for women in managerial, confidence and communication based skills, with accompanying networking and support systems to facilitate the retention and advancement of women in the industry sector.
Research limitations/implications – Due to the research approach, the data are not generalisable. Therefore, researchers are advised to research and test the findings with a larger group. Researchers are also recommended to investigate the impact of expanded CPD opportunities for both men and women.
Originality/value – The paper puts forward a business case for the advancement of specific CPD training for women, to facilitate the expansion of equality and diversity in the workforce in the UK construction industry
Multivariate Diophantine equations with many solutions
We show that for each n-tuple of positive rational integers (a_1,..,a_n)
there are sets of primes S of arbitrarily large cardinality s such that the
solutions of the equation a_1x_1+...+a_nx_n=1 with the x_i all S-units are not
contained in fewer than exp((4+o(1))s^{1/2}(log s)^{-1/2}) proper linear
subspaces of C^n. This generalizes a result of Erdos, Stewart and Tijdeman for
m=2 [Compositio 36 (1988), 37-56].
Furthermore we prove that for any algebraic number field K of degree n, any
integer m with 1<=m<n, and any sufficiently large s there are integers
b_0,...,b_m in a number field which are linearly independent over the
rationals, and prime numbers p_1,...,p_s, such that the norm polynomial
equation |N_{K/Q}(b_0+b_1x_1+...+b_mx_m)|=p_1^{z_1}...p_s^{z_s} has at least
exp{(1+o(1)){n/m}s^{m/n}(log s)^{-1+m/n}) solutions in integers
x_1,..,x_m,z_1,..,z_s. This generalizes a result of Moree and Stewart [Indag.
Math. 1 (1990), 465-472].
Our main tool, also established in this paper, is an effective lower bound
for the number of ideals in a number field K of norm <=X composed of prime
ideals which lie outside a given finite set of prime ideals T and which have
norm <=Y. This generalizes a result of Canfield, Erdos and Pomerance [J. Number
Th. 17 (1983), 1-28], and of Moree and Stewart (see above).Comment: 29 page
- …