57 research outputs found

    Polyethylene terephthalate : factors affecting the impact behaviour

    Get PDF
    The following study forms part of a programme of work designed to produce a commercial moulding material based upon Polyethylene terephthalate. The work described relates specifically to the investigation of the impact characteristics of PET, and improvements that may be obtained in the impact strength by incorporation of the rubbery phase into the glassy PET matrix. The two phase systems studied in greatest detail were PET/Ionomer (Surlyn A) blends. A grafting reaction that was found to occur in the melt between these two polymers has been investigated in some detail using a Weissenberg Rheogoniometer. Also reported are studies of the crazing properties and nature of the craze structures produced in amorphous PET, together with a study of the crack velocity profiles obtained during the high velocity impact fracture of PET mouldings. This latter work led to a correlation of the topographical features observed on the fracture surface with the crack velocity. As a result a stick-slip mechanism of crack propagation was proposed, involving craze formation and fracture

    Spin-dependent thermoelectric transport coefficients in near-perfect quantum wires

    Full text link
    Thermoelectric transport coefficients are determined for semiconductor quantum wires with weak thickness fluctuations. Such systems exhibit anomalies in conductance near 1/4 and 3/4 of 2e^2/h on the rising edge to the first conductance plateau, explained by singlet and triplet resonances of conducting electrons with a single weakly bound electron in the wire [T. Rejec, A. Ramsak, and J.H. Jefferson, Phys. Rev. B 62, 12985 (2000)]. We extend this work to study the Seebeck thermopower coefficient and linear thermal conductance within the framework of the Landauer-Buettiker formalism, which also exhibit anomalous structures. These features are generic and robust, surviving to temperatures of a few degrees. It is shown quantitatively how at elevated temperatures thermal conductance progressively deviates from the Wiedemann-Franz law.Comment: To appear in Phys. Rev. B 2002; 3 figure

    Global burden and strength of evidence for 88 risk factors in 204 countries and 811 subnational locations, 1990–2021: a systematic analysis for the Global Burden of Disease Study 2021

    Get PDF
    Background: Understanding the health consequences associated with exposure to risk factors is necessary to inform public health policy and practice. To systematically quantify the contributions of risk factor exposures to specific health outcomes, the Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2021 aims to provide comprehensive estimates of exposure levels, relative health risks, and attributable burden of disease for 88 risk factors in 204 countries and territories and 811 subnational locations, from 1990 to 2021. Methods: The GBD 2021 risk factor analysis used data from 54 561 total distinct sources to produce epidemiological estimates for 88 risk factors and their associated health outcomes for a total of 631 risk–outcome pairs. Pairs were included on the basis of data-driven determination of a risk–outcome association. Age-sex-location-year-specific estimates were generated at global, regional, and national levels. Our approach followed the comparative risk assessment framework predicated on a causal web of hierarchically organised, potentially combinative, modifiable risks. Relative risks (RRs) of a given outcome occurring as a function of risk factor exposure were estimated separately for each risk–outcome pair, and summary exposure values (SEVs), representing risk-weighted exposure prevalence, and theoretical minimum risk exposure levels (TMRELs) were estimated for each risk factor. These estimates were used to calculate the population attributable fraction (PAF; ie, the proportional change in health risk that would occur if exposure to a risk factor were reduced to the TMREL). The product of PAFs and disease burden associated with a given outcome, measured in disability-adjusted life-years (DALYs), yielded measures of attributable burden (ie, the proportion of total disease burden attributable to a particular risk factor or combination of risk factors). Adjustments for mediation were applied to account for relationships involving risk factors that act indirectly on outcomes via intermediate risks. Attributable burden estimates were stratified by Socio-demographic Index (SDI) quintile and presented as counts, age-standardised rates, and rankings. To complement estimates of RR and attributable burden, newly developed burden of proof risk function (BPRF) methods were applied to yield supplementary, conservative interpretations of risk–outcome associations based on the consistency of underlying evidence, accounting for unexplained heterogeneity between input data from different studies. Estimates reported represent the mean value across 500 draws from the estimate's distribution, with 95% uncertainty intervals (UIs) calculated as the 2·5th and 97·5th percentile values across the draws. Findings: Among the specific risk factors analysed for this study, particulate matter air pollution was the leading contributor to the global disease burden in 2021, contributing 8·0% (95% UI 6·7–9·4) of total DALYs, followed by high systolic blood pressure (SBP; 7·8% [6·4–9·2]), smoking (5·7% [4·7–6·8]), low birthweight and short gestation (5·6% [4·8–6·3]), and high fasting plasma glucose (FPG; 5·4% [4·8–6·0]). For younger demographics (ie, those aged 0–4 years and 5–14 years), risks such as low birthweight and short gestation and unsafe water, sanitation, and handwashing (WaSH) were among the leading risk factors, while for older age groups, metabolic risks such as high SBP, high body-mass index (BMI), high FPG, and high LDL cholesterol had a greater impact. From 2000 to 2021, there was an observable shift in global health challenges, marked by a decline in the number of all-age DALYs broadly attributable to behavioural risks (decrease of 20·7% [13·9–27·7]) and environmental and occupational risks (decrease of 22·0% [15·5–28·8]), coupled with a 49·4% (42·3–56·9) increase in DALYs attributable to metabolic risks, all reflecting ageing populations and changing lifestyles on a global scale. Age-standardised global DALY rates attributable to high BMI and high FPG rose considerably (15·7% [9·9–21·7] for high BMI and 7·9% [3·3–12·9] for high FPG) over this period, with exposure to these risks increasing annually at rates of 1·8% (1·6–1·9) for high BMI and 1·3% (1·1–1·5) for high FPG. By contrast, the global risk-attributable burden and exposure to many other risk factors declined, notably for risks such as child growth failure and unsafe water source, with age-standardised attributable DALYs decreasing by 71·5% (64·4–78·8) for child growth failure and 66·3% (60·2–72·0) for unsafe water source. We separated risk factors into three groups according to trajectory over time: those with a decreasing attributable burden, due largely to declining risk exposure (eg, diet high in trans-fat and household air pollution) but also to proportionally smaller child and youth populations (eg, child and maternal malnutrition); those for which the burden increased moderately in spite of declining risk exposure, due largely to population ageing (eg, smoking); and those for which the burden increased considerably due to both increasing risk exposure and population ageing (eg, ambient particulate matter air pollution, high BMI, high FPG, and high SBP). Interpretation: Substantial progress has been made in reducing the global disease burden attributable to a range of risk factors, particularly those related to maternal and child health, WaSH, and household air pollution. Maintaining efforts to minimise the impact of these risk factors, especially in low SDI locations, is necessary to sustain progress. Successes in moderating the smoking-related burden by reducing risk exposure highlight the need to advance policies that reduce exposure to other leading risk factors such as ambient particulate matter air pollution and high SBP. Troubling increases in high FPG, high BMI, and other risk factors related to obesity and metabolic syndrome indicate an urgent need to identify and implement interventions. Funding: Bill & Melinda Gates Foundation

    Evaluating the long-term conformation and hoof growth effects of starting hoof trimming at 5 months of age in New Zealand dairy goats

    No full text
    ABSTRACT: Hoof overgrowth is associated with poor conformation, an altered weight-bearing surface, and a reduction in the hoof's anatomic and functional integrity. As a result of housing systems that promote hoof overgrowth, hoof trimming is considered a priority in dairy goats. However, there are few data on the effects of the timing of first trimming on hoof conformation and growth rate. The aims of this study were (1) to evaluate the long-term effects of 2 different hoof trimming start times and (2) to investigate the pattern of hoof growth across the first 2 yr of life. Eighty 5-mo-old female Saanen-cross commercially housed dairy goats were allocated randomly to 1 of 2 treatments: (1) early trimmed (trimming beginning at 5 mo old; hooves were trimmed every 4 mo thereafter) and (2) late trimmed (trimming beginning at 13 mo old; hooves were trimmed every 4 mo thereafter). Using a combination of photographs and radiographs, hoof conformation, joint positions, and hoof wall length were assessed before the 13- and 25-mo trimming events. Hoof growth was assessed every 12 wk using caliper measurements. Overall, starting hoof trimming earlier had minor and inconsistent effects. However, detrimental changes in conformation and joint positions occurred between trimming events, particularly in the hind hooves, regardless of trimming treatment. At both assessments, there was a high percentage of overgrown toes and dipped heels, with the hind hooves being more affected compared with the front (overgrown toes at 13 mo, 97.1 vs. 79.1 ± 5.2%; overgrown toes at 25 mo, 91.7 vs. 56.3 ± 6.7%; dipped heels at 13 mo, 98.5 vs. 19.3 ± 5.0%; dipped heels at 25 mo, 88.3 vs. 4.9 ± 4.8%). In addition, at both assessments, the distal interphalangeal joint angle was greater in the hind hooves compared with the front (13 mo, 79.5 vs. 65.2 ± 1.7°; 25 mo, 79.0 vs. 66.7 ± 0.9°), whereas heel angles were less in the hind hooves compared with the front (13 mo, 41.8 vs. 57.1 ± 1.5°; 25 mo, 44.9 vs. 55.9 ± 1.1°). On average, the front hooves grew 4.39 mm/mo and the hind hooves grew 4.20 mm/mo. Early trimming did not have consistent effects on hoof growth rate. Importantly, our results suggest that trimming every 4 mo is not sufficient to prevent hoof overgrowth, the development of poor conformation, and detrimental changes in joint positions, particularly in the hind hooves. Furthermore, the detrimental changes may have masked any long-term treatment effects. Therefore, trimming frequency and age of first trimming should be considered when devising hoof care protocols for dairy goats housed in environments that do not offer opportunities for natural hoof wear
    • …
    corecore