Use of insulin degludec in pregnancy: two case reports and a literature review

Abstract As of now, insulin Degludec has no indication for use in pregnancy, because of the lack of studies that prove its safety for foetus. However it isn't infrequent that some women conceive while treating with insulin Degludec. So, before deciding to change the type of insulin therapy during pregnancy, an evaluation of the risk associated to a possible temporary worsening of glycaemic control, due to that insulin replacement, is needed. Referring to case series reported in the scientific literature could provide a support when a clinical decision need to be taken. We report two cases of women affected by type 1 diabetes who had unplanned pregnancies during treatment with insulin Degludec. In order to avoid the risk of a possible worsening of glycaemic control due to insulin switch, we decided to continue the treatment with Degludec during their pregnancies, after obtaining the patients' written informed consent. Daily insulin requirement gradually increased for both women pregnancy progressed, and glycated haemoglobin (HbA1c) values improved from the first observation to delivery: 55 mmol/mol (7.2%) at 9 weeks to 47 mmol/mol (6.5%) at 36 weeks, in Patient 1 (P1); 44 mmol/mol (6.2%) at 8 weeks to 33 mmol/mol (5.2%) at 36 weeks, in Patient 2 (P2). P1 delivered at week 37 with a caesarean section due to failed induction. The newborn, a girl of 3398 g at birth, developed neonatal hypoglycaemia and respiratory distress (Apgar 6-6). Six days after birth she underwent colectomy because of necrotizing enterocolitis and was finally diagnosed with atypical cystic fibrosis. P2 gave birth to a healthy girl (weight 2745g at birth, Apgar 7-9) at 37 weeks, undergoing a caesarean section for maternal cervical dystocia, without neonatal complications. Our experience provides additional evidence on the safety of insulin Degludec in pregnancy without any maternal or neonatal outcome suggesting its toxicity

Enhancement of the Biological and Mechanical Performances of Sintered Hydroxyapatite by Multiple Ions Doping

In the present work, hydroxyapatite (HA) nanoparticles doped with Mg2+, Sr2+, and Zn2+ ions are developed by wet neutralization method and then sintered at 1,250°C to obtain bulk consolidated materials. Physicochemical and microstructural analyses show that the presence of doping ions in the HA structure induced the formation of βTCP as secondary phase, during the sintering process, and we found that this effect is depending on the stability of the various doping ions in the hydroxyapatite lattice itself. We also found that the formation of βTCP as secondary phase, in turn, confines the grain growth of HA induced by the high-temperature sintering process, thus leading to a strong increase of the flexural strength of the bulk materials, according to Hall-Petch-like law. Furthermore, we found that the doping ions enter also in the structure of the βTCP phase; besides the grain growth confinement, also the solubility and ion release ability of the final materials were enhanced. In addition to ameliorate the mechanical performance, the described phenomena also activate multiple biofunctionalities: (i) ability to upregulate various genes involved in the osteogenesis, as obtained by human adipose stem cells culture and evaluated by array technology; (ii) enhanced resistance to the adhesion and proliferation of Gram+ and Gram– bacterial strains. Hence, our results open a perspective for the use of sintered multiple ion-doped HA to develop ceramic biodevices, such as plates, screws, or other osteosynthesis media, with enhanced strength, osteointegrability, and the ability to prevent post-surgical infections

Bioactive Materials for Soft Tissue Repair

Over the past decades, age-related pathologies have increased abreast the aging population worldwide. The increased age of the population indicates that new tools, such as biomaterials/scaffolds for damaged tissues, which display high efficiency, effectively and in a limited period of time, for the regeneration of the body’s tissue are needed. Indeed, scaffolds can be used as templates for three-dimensional tissue growth in order to promote the tissue healing stimulating the body’s own regenerative mechanisms. In tissue engineering, several types of biomaterials are employed, such as bioceramics including calcium phosphates, bioactive glasses, and glass–ceramics. These scaffolds seem to have a high potential as biomaterials in regenerative medicine. In addition, in conjunction with other materials, such as polymers, ceramic scaffolds may be used to manufacture composite scaffolds characterized by high biocompatibility, mechanical efficiency and load-bearing capabilities that render these biomaterials suitable for regenerative medicine applications. Usually, bioceramics have been used to repair hard tissues, such as bone and dental defects. More recently, in the field of soft tissue engineering, this form of scaffold has also shown promising applications. Indeed, soft tissues are continuously exposed to damages, such as burns or mechanical traumas, tumors and degenerative pathology, and, thereby, thousands of people need remedial interventions such as biomaterials-based therapies. It is known that scaffolds can affect the ability to bind, proliferate and differentiate cells similar to those of autologous tissues. Therefore, it is important to investigate the interaction between bioceramics and somatic/stem cells derived from soft tissues in order to promote tissue healing. Biomimetic scaffolds are frequently employed as drug-delivery system using several therapeutic molecules to increase their biological performance, leading to ultimate products with innovative functionalities. This review provides an overview of essential requirements for soft tissue engineering biomaterials. Data on recent progresses of porous bioceramics and composites for tissue repair are also presented

Characterization of T2-Low and T2-High Asthma Phenotypes in Real-Life

Asthma is a heterogeneous and complex condition characterized by chronic airway inflammation, which may be clinically stratified into three main phenotypes: type 2 (T2) low, T2-high allergic, and T2-high non-allergic asthma. This real-world study investigated whether phenotyping patients with asthma using non-invasive parameters could be feasible to characterize the T2-low and T2-high asthma phenotypes in clinical practice. This cross-sectional observational study involved asthmatic outpatients (n = 503) referring to the Severe Asthma Centre of the San Luigi Gonzaga University Hospital. Participants were stratified according to the patterns of T2 inflammation and atopic sensitization. Among outpatients, 98 (19.5%) patients had T2-low asthma, 127 (25.2%) T2-high non-allergic, and 278 (55.3%) had T2-high allergic phenotype. In comparison to T2-low, allergic patients were younger (OR 0.945, p < 0.001) and thinner (OR 0.913, p < 0.001), had lower smoke exposure (OR 0.975, p < 0.001) and RV/TLC% (OR 0.950, p < 0.001), higher prevalence of asthma severity grade 5 (OR 2.236, p < 0.05), more frequent rhinitis (OR 3.491, p < 0.001) and chronic rhinosinusitis with (OR 2.650, p < 0.001) or without (OR 1.919, p < 0.05) nasal polyps, but less common arterial hypertension (OR 0.331, p < 0.001). T2-high non-allergic patients had intermediate characteristics. Non-invasive phenotyping of asthmatic patients is possible in clinical practice. Identifying characteristics in the three main asthma phenotypes could pave the way for further investigations on useful biomarkers for precision medicine

Osteoinductivity of hydroxylapatite scaffolds with human adipose stem cell cultures

OBJECTIVE: In vitro biocompatibility and osteoinductive ability of a recently developed biomorphic hydroxylapatite ceramic scaffold (B-HA), derived from transformation of wood structures, were analyzed using human adipose stem cells (hASCs). MATERIALS AND METHODS: Cell viability and metabolic activity were evaluated in hASCs, parental cells and in recombinant genetically engineered hASC-eGFP cells expressing the green fluorescence protein. B-HA osteoinductivity properties, such as differentially expressed genes (DEG) involved in the skeletal development pathway, osteocalcin (OCN) protein expression and mineral matrix deposition in hASCs, were evaluated. RESULTS: In vitro induction of osteoblastic genes, such as Alkaline phosphatase (ALPL), Bone gamma-carboxyglutamate (gla) protein (BGLAP), SMAD family member 3 (SMAD3), Sp7 transcription factor (SP7) and Transforming growth factor, beta 3 (TGFB3) and Tumor necrosis factor (ligand) superfamily, member 11 (TNFSF11)/Receptor activator of NF-KB (RANK) ligand (RANKL), involved in osteoclast differentiation, was undertaken in cells grown on B-HA. Chondrogenic transcription factor SRY (sex determining region Y)-box 9 (SOX9), tested up- regulated in hASCs grown on the B-HA scaffold. Gene expression enhancement in the skeletal development pathway was detected in hASCs using B-HA compared to sintered hydroxylapatite (S- HA). OCN protein expression and calcium deposition were increased in hASCs grown on B-HA in comparison with the control. CONCLUSIONS: This study demonstrates the biocompatibility of the novel biomorphic B-HA scaffold and its potential use in osteogenic differentiation for hASCs. Our data highlight the relevance of B-HA for bone regeneration purposes

In Vitro Osteoinductivity Assay of Hydroxylapatite Scaffolds, Obtained with Biomorphic Transformation Processes, Assessed Using Human Adipose Stem Cell Cultures

In this study, the in vitro biocompatibility and osteoinductive ability of a recently developed biomorphic hydroxylapatite ceramic scaffold (B-HA) derived from transformation of wood structures were analyzed using human adipose stem cells (hASCs). Cell viability and metabolic activity were evaluated in hASCs, parental cells and in recombinant genetically engineered hASC-eGFP cells expressing the green fluorescence protein. B-HA osteoinductivity properties, such as differentially expressed genes (DEG) involved in the skeletal development pathway, osteocalcin (OCN) protein expression and mineral matrix deposition in hASCs, were evaluated. In vitro induction of osteoblastic genes, such as Alkaline phosphatase (ALPL), Bone gamma-carboxyglutamate (gla) protein (BGLAP), SMAD family member 3 (SMAD3), Sp7 transcription factor (SP7) and Transforming growth factor, beta 3 (TGFB3) and Tumor necrosis factor (ligand) superfamily, member 11 (TNFSF11)/Receptor activator of NF-κB (RANK) ligand (RANKL), involved in osteoclast differentiation, was undertaken in cells grown on B-HA. Chondrogenic transcription factor SRY (sex determining region Y)-box 9 (SOX9), tested up-regulated in hASCs grown on the B-HA scaffold. Gene expression enhancement in the skeletal development pathway was detected in hASCs using B-HA compared to sintered hydroxylapatite (S-HA). OCN protein expression and calcium deposition were increased in hASCs grown on B-HA in comparison with the control. This study demonstrates the biocompatibility of the novel biomorphic B-HA scaffold and its potential use in osteogenic differentiation for hASCs. Our data highlight the relevance of B-HA for bone regeneration purposes