Fault classification system for switchgear cbm from an ultrasound analysis technique using extreme learning machine

Currently, the existing condition-based maintenance (CBM) diagnostic test practices for ultrasound require the tester to interpret test results manually. Different testers may give different opinions or interpretations of the detected ultrasound. It leads to wrong interpretation due to depending on tester experience. Furthermore, there is no commercially available product to standardize the interpretation of the ultrasound data. Therefore, the objective is the correct interpretation of an ultrasound, which is one of the CBM methods for medium switchgears, by using an artificial neural network (ANN), to give more accurate results when assessing their condition. Information and test results from various switchgears were gathered in order to develop the classification and severity of the corona, surface discharge, and arcing inside of the switchgear. The ultrasound data were segregated based on their defects found during maintenance. In total, 314 cases of normal, 160 cases of the corona, 149 cases of tracking, and 203 cases of arcing were collected. Noise from ultrasound data was removed before uploading it as a training process to the ANN engine, which used the extreme learning machine (ELM) model. The developed AI-based switchgear faults classification system was designed and incorporated with the feature of scalability and can be tested and replicated for other switchgear conditions. A customized graphical user interface (GUI), Ultrasound Analyzer System (UAS), was also developed, to enable users to obtain the switchgear condition or classification output via a graphical interface screen. Hence, accurate decision-making based on this analysis can be made to prioritize the urgency for the remedial works

Design and optimization of a small-scale horizontal axis wind turbine blade for energy harvesting at low wind profile areas

Wind turbine blades perform the most important function in the wind energy conversion process. It plays the most vital role of absorbing the kinetic energy of the wind, and converting it to mechanical energy before it is transformed into electrical energy by generators. In this work, National Advisory Committee for Aeronautics (NACA) 4412 and SG6043 airfoils were selected to design a small horizontal axis variable speed wind turbine blade for harvesting efficient energy from low wind speed areas. Due to the low wind profile of the targeted area, a blade of one-meter radius was considered in this study. To attain the set objectives of fast starting time and generate more torque and power at low wind speeds, optimization was carryout by varying Reynolds numbers (Re) on tip speed ratios (TSR) values of 4, 5, and 6. The blade element momentum (BEM) method was developed in MATLAB programming code to iteratively find the best twist and chord distributions along the one-meter blade length for each Re and tip speed ratio (TSR) value. To further enhance the blade performance, the twist and chord distributions were transferred to Q-blade software, where simulations of the power coefficients (Cp) were performed and further optimized by varying the angles of attack. The highest power coefficients values of 0.42, 0.43, and 0.44 were recorded with NACA 4412 rotor blades, and 0.43, 0.44, and 0.45 with SG6043 rotor blades. At the Re of 3.0 × 105, the blades were able to harvest maximum power of 144.73 watts (W), 159.69 W, and 201.04 W with the NACA 4412 and 213.15 W, 226.44 W, 245.09 W with the SG6043 at the TSR of 4, 5, and 6 respectively. The lowest cut-in speed of 1.80 m/s and 1.70 m/s were achieved with NACA 4412 and SG6043 airfoils at TSR 4. At a low wind speed of 4 m/s, the blades were able to harness an efficient power of 79.3. W and 80.10 W with both rotor blades at the TSR 4 and 6 accordingly

Design and optimization of a small-scale horizontal axis wind turbine blade for energy harvesting at low wind profile areas

Wind turbine blades perform the most important function in the wind energy conversion process. It plays the most vital role of absorbing the kinetic energy of the wind, and converting it to mechanical energy before it is transformed into electrical energy by generators. In this work, National Advisory Committee for Aeronautics (NACA) 4412 and SG6043 airfoils were selected to design a small horizontal axis variable speed wind turbine blade for harvesting efficient energy from low wind speed areas. Due to the low wind profile of the targeted area, a blade of one-meter radius was considered in this study. To attain the set objectives of fast starting time and generate more torque and power at low wind speeds, optimization was carryout by varying Reynolds numbers (Re) on tip speed ratios (TSR) values of 4, 5, and 6. The blade element momentum (BEM) method was developed in MATLAB programming code to iteratively find the best twist and chord distributions along the one-meter blade length for each Re and tip speed ratio (TSR) value. To further enhance the blade performance, the twist and chord distributions were transferred to Q-blade software, where simulations of the power coefficients (Cp) were performed and further optimized by varying the angles of attack. The highest power coefficients values of 0.42, 0.43, and 0.44 were recorded with NACA 4412 rotor blades, and 0.43, 0.44, and 0.45 with SG6043 rotor blades. At the Re of 3.0 × 105, the blades were able to harvest maximum power of 144.73 watts (W), 159.69 W, and 201.04 W with the NACA 4412 and 213.15 W, 226.44 W, 245.09 W with the SG6043 at the TSR of 4, 5, and 6 respectively. The lowest cut-in speed of 1.80 m/s and 1.70 m/s were achieved with NACA 4412 and SG6043 airfoils at TSR 4. At a low wind speed of 4 m/s, the blades were able to harness an efficient power of 79.3. W and 80.10 W with both rotor blades at the TSR 4 and 6 accordingly

A brief review on ancillary services from advanced metering infrastructure (ASAMI) for distributed renewable energy network

Advanced metering infrastructure (AMI) is an integrated system of smart meters, communications networks, and data management systems that enable the secure, effective, and dependable distribution of power while also delivering enhanced capabilities to energy consumers. The system also can measure power usage, connect, and disconnect service, detect tampering, identify and isolate outages, and monitor voltage automatically and remotely, which were previously unavailable or required user intervention. This article focuses on AMI and effectively integrating renewable energy sources (RES). However, the study also recommends smart metering for renewables such as solar photovoltaic (PV), hydropower, anaerobic digestion (ad) metering, and renewable energy storage, in which AIM thoroughly supervises the energy utilized by users' appliances. With the prediction of new ancillary services connected with contestability, related regulation, the sufficiency of consumer protection, and safety issues, the magnitude of renewable energy sources in the AMI is an almost unprecedented problem for consumers. The present energy management problems include reducing the power supply-demand gap and boosting power supply dependability. Implementing AMI with distributed renewable energy resources might be a viable strategy for lowering power consumption, improving power supply management, and maximizing management resource use

Enhancement of hydrogen storage performance in cost effective novel g–C3N4–MoS2–Ni(OH)2 ternary nanocomposite fabricated via hydrothermal method

Energy from hydrogen has been looked upon with great favours to encounter the shortage of fossil fuels in energy generation. Safety issues and storage concerns of hydrogen has been a major drawback in this regard. Here, a novel material g–C3N4–MoS2–Ni(OH)2 is crafted to achieve promisingly sufficient storage capacity for hydrogen. Hydrothermal route is optimized in a best possible way to achieve flower like structure of MoS2. It is then blended with fine sheets of Ni(OH)2 and as synthesized g-C3N4 to develop the promising nanocomposite g–C3N4–MoS2–Ni(OH)2. Morphological investigation using TEM and SEM analyses revealed flower-like structure near fine sheets of Ni(OH)2 and g-C3N4. Fruitfully, the modified surface of the nanocomposite resulted in an enhanced hydrogen storage capability. The hydrogen sorption experiments were carried out at 150 °C for 15 and 30 min intervals under 10 bar hydrogen pressure, and the hydrogen desorption process was carried out from room temperature (RT) to 200 °C with a ramping rate of 15 °C min−1 in an argon medium with a flow rate of 100 mL min−1. During non-isothermal H2 desorption, S150 composite exhibits better hydrogen storage capacity of 2.79 and 3.21 wt% under hydrogenation intervals of 15 and 30 min respectively. Furthermore, S150 desorbed 3.7 wt% H2 in 20 min at isothermal desorption of 200 °C

Detection of corona faults in switchgear by ssing 1D-CNN, LSTM, and 1D-CNN-LSTM methods

The damaging effects of corona faults have made them a major concern in metal-clad switchgear, requiring extreme caution during operation. Corona faults are also the primary cause of flashovers in medium-voltage metal-clad electrical equipment. The root cause of this issue is an electrical breakdown of the air due to electrical stress and poor air quality within the switchgear. Without proper preventative measures, a flashover can occur, resulting in serious harm to workers and equipment. As a result, detecting corona faults in switchgear and preventing electrical stress buildup in switches is critical. Recent years have seen the successful use of Deep Learning (DL) applications for corona and non-corona detection, owing to their autonomous feature learning capability. This paper systematically analyzes three deep learning techniques, namely 1D-CNN, LSTM, and 1D-CNN-LSTM hybrid models, to identify the most effective model for detecting corona faults. The hybrid 1D-CNN-LSTM model is deemed the best due to its high accuracy in both the time and frequency domains. This model analyzes the sound waves generated in switchgear to detect faults. The study examines model performance in both the time and frequency domains. In the time domain analysis (TDA), 1D-CNN achieved success rates of 98%, 98.4%, and 93.9%, while LSTM obtained success rates of 97.3%, 98.4%, and 92.4%. The most suitable model, the 1D-CNN-LSTM, achieved success rates of 99.3%, 98.4%, and 98.4% in differentiating corona and non-corona cases during training, validation, and testing. In the frequency domain analysis (FDA), 1D-CNN achieved success rates of 100%, 95.8%, and 95.8%, while LSTM obtained success rates of 100%, 100%, and 100%. The 1D-CNN-LSTM model achieved a 100%, 100%, and 100% success rate during training, validation, and testing. Hence, the developed algorithms achieved high performance in identifying corona faults in switchgear, particularly the 1D-CNN-LSTM model due to its accuracy in detecting corona faults in both the time and frequency domains

Construction novel highly active photocatalytic H2 evolution over noble-metal-free trifunctional Cu3P/CdS nanosphere decorated g-C3N4 nanosheet

Hydrogen energy possesses immense potential in developing a green renewable energy system. However, a significant problem still exists in improving the photocatalytic H2 production activity of metal-free graphitic carbon nitride (g-C3N4) based photocatalysts. Here is a novel Cu3P/CdS/g-C3N4 ternary nanocomposite for increasing photocatalytic H2 evolution activity. In this study, systematic characterizations have been carried out using techniques like X-ray diffraction (XRD), scanning electron microscopy (SEM), high resolution transmission electron microscopy (HR-TEM), Raman spectra, UV–Vis diffuse reflectance spectroscopy, X-ray photoelectron spectroscopy (XPS), surface area analysis (BET), electrochemical impedance (EIS), and transient photocurrent response measurements. Surprisingly, the improved 3CP/Cd-6.25CN photocatalyst displays a high H2 evolution rate of 125721 μmol h−1 g−1. The value obtained exceeds pristine g-C3N4 and Cu3P/CdS by 339.8 and 7.6 times, respectively. This could be the maximum rate of hydrogen generation for a g–C3N4–based ternary nanocomposite ever seen when exposed to whole solar spectrum and visible light (λ > 420 nm). This research provides fresh perspectives on the rational manufacture of metal-free g-C3N4 based photocatalysts that will increase the conversion of solar energy. By reusing the used 3CP/Cd/g-C3N4 photocatalyst in five consecutive runs, the stability of the catalyst was investigated, and their individual activity in the H2 production activity was assessed. To comprehend the reaction mechanisms and emphasise the value of synergy between the three components, several comparison systems are built

Construction novel highly active photocatalytic H2 evolution over noble-metal-free trifunctional Cu3P/CdS nanosphere decorated g-C3N4 nanosheet

Hydrogen energy possesses immense potential in developing a green renewable energy system. However, a significant problem still exists in improving the photocatalytic H2 production activity of metal-free graphitic carbon nitride (g-C3N4) based photocatalysts. Here is a novel Cu3P/CdS/g-C3N4 ternary nanocomposite for increasing photocatalytic H2 evolution activity. In this study, systematic characterizations have been carried out using techniques like X-ray diffraction (XRD), scanning electron microscopy (SEM), high resolution transmission electron microscopy (HR-TEM), Raman spectra, UV–Vis diffuse reflectance spectroscopy, X-ray photoelectron spectroscopy (XPS), surface area analysis (BET), electrochemical impedance (EIS), and transient photocurrent response measurements. Surprisingly, the improved 3CP/Cd-6.25CN photocatalyst displays a high H2 evolution rate of 125721 μmol h−1 g−1. The value obtained exceeds pristine g-C3N4 and Cu3P/CdS by 339.8 and 7.6 times, respectively. This could be the maximum rate of hydrogen generation for a g–C3N4–based ternary nanocomposite ever seen when exposed to whole solar spectrum and visible light (λ > 420 nm). This research provides fresh perspectives on the rational manufacture of metal-free g-C3N4 based photocatalysts that will increase the conversion of solar energy. By reusing the used 3CP/Cd/g-C3N4 photocatalyst in five consecutive runs, the stability of the catalyst was investigated, and their individual activity in the H2 production activity was assessed. To comprehend the reaction mechanisms and emphasise the value of synergy between the three components, several comparison systems are built

Voltage-sensing mechanism is conserved among ion channels gated by opposite voltages

Hyperpolarization-activated cyclic-nucleotide-gated (HCN) ion channels are found in rhythmically firing cells in the brain and in the heart, where the cation current through HCN channels (called I(h) or I(f)) causes these cells to fire repeatedly. These channels are also found in non-pacing cells, where they control resting membrane properties, modulate synaptic transmission, mediate long-term potentiation, and limit extreme hyperpolarizations. HCN channels share sequence motifs with depolarization-activated potassium (Kv) channels, such as the fourth transmembrane segment S4. S4 is the main voltage sensor of Kv channels, in which transmembrane movement of S4 charges triggers the opening of the activation gate. Here, using cysteine accessibility methods, we investigate whether S4 moves in an HCN channel. We show that S4 movement is conserved between Kv and HCN channels, which indicates that S4 is also the voltage sensor in HCN channels. Our results suggest that a conserved voltage-sensing mechanism operates in the oppositely voltage-gated Kv and HCN channels, but that there are different coupling mechanisms between the voltage sensor and activation gate in the two different channels