231,834 research outputs found
Balanced-bellows spirometer
Compact balanced-bellows dry type spirometer was designed to be insensitive to acceleration fields along any or all coordinate axes. It provides true indication of respiratory action of test subject without need for calibration in acceleration fields
Observations of Townsend’s Solitaires (Myadestes townsendi) on Mount Magazine in Logan County, Arkansas
Development of an Orbital Receiver for Low-Frequency Radio Energy from the Planet Jupiter Final Report
Development of radio receiver for Pioneer F/G Asteroid-Jupiter spacecraf
Low cost uniform heat source
Electrically powered heat source was developed for ground simulation of isotope heat-source assembly in Brayton power system. Heat source, which operates on ordinary 110 vac power, consists of tungsten filament heating element wound onto a spirally grooved boron nitride core and inserted in a hollowed-out graphite hexahedron
Severe storm initiation and development from satellite infrared imagery and Rawinsonde data
The geographical distribution of potential temperatures, mixing ratio, and streamlines of flow patterns at 850, 700, and 500 mb heights are used to understand the prestorm convection and the horizontal convergence of moisture. From the analysis of 21 tornadoes the following conclusions are reached: (1) Strong horizontal convergence of moisture appeared at the 850, 700, and 500 mb levels in the area 12 hours before the storm formation; (2) An abundantly moist atmosphere below 3 km (700 mb) becomes convectively unstable during the time period between 12 and 24 hours before the initiation of the severe storms; (3) Strong winds veering with height with direction parallel to the movement of a dryline, surface fronts, etc; (4) During a 36-hour period, a tropopause height in the areas of interest is lowest at the time of tornadic cloud formation; (5) A train of gravity waves is detected before and during the cloud formation period. Rapid-scan infrared imagery provides near real-time information on the life cycle of the storm which can be summarized as follows: (1) Enhanced convection produced an overshooting cloud top penetrating above the tropopause, making the mass density of the overshooting cloud much greater than the mass density of the surrounding air; (2) The overshooting cloud top collapsed at the end of the mature stage of the cloud development; (3) The tornado touchdown followed the collapse of the overshooting cloud top
No evidence of dark matter in the solar neighborhood
We measured the surface mass density of the Galactic disk at the solar
position, up to 4 kpc from the plane,by means of the kinematics of ~400 thick
disk stars. The results match the expectations for the visible mass only, and
no dark matter is detected in the volume under analysis. The current models of
dark matter halo are excluded with a significance higher than 5sigma, unless a
highly prolate halo is assumed, very atypical in cold dark matter simulations.
The resulting lack of dark matter at the solar position challenges the current
models.Comment: Proceeding of the first binational Sochias-AAA meeting, held in San
Juan, Argentin
Space processing applications payload equipment study. Volume 2B: Payload interface analysis (power/thermal/electromagnetic compatibility)
As a part of the task of performing preliminary engineering analysis of modular payload subelement/host vehicle interfaces, a subsystem interface analysis was performed to establish the integrity of the modular approach to the equipment design and integration. Salient areas that were selected for analysis were power and power conditioning, heat rejection and electromagnetic capability (EMC). The equipment and load profiles for twelve representative experiments were identified. Two of the twelve experiments were chosen as being representative of the group and have been described in greater detail to illustrate the evaluations used in the analysis. The shuttle orbiter will provide electrical power from its three fuel cells in support of the orbiter and the Spacelab operations. One of the three shuttle orbiter fuel cells will be dedicated to the Spacelab electrical power requirements during normal shuttle operation. This power supplies the Spacelab subsystems and the excess will be available to the payload. The current Spacelab sybsystem requirements result in a payload allocation of 4.0 to 4.8 kW average (24 hour/day) and 9.0 kW peak for 15 minutes
- …