801 research outputs found
Recommended from our members
A combined photolytic–electrolytic system for the simultaneous recovery of copper and degradation of phenol or 4-chlorophenol in mixed solutions
The effects of the presence of copper on the photooxidation of phenol and 4-chlorophenol and of the presence of the phenols on the recovery of copper by electrodeposition are studied in three systems: a photolytic cell in the presence and absence of TiO2 as a catalyst or H2O2 as an oxidant; an electrolytic cell and a combined photolytic – electrolytic system. The optimum system for the simultaneous removal of copper and destruction of the phenols which overcomes the effects of copper-phenol reactions is a combined system with concentrator electrode technology incorporated into the electrolytic cell. This combined system achieves > 99% removal of copper and destruction of phenol or 4-chlorophenol in an 8 h period.EPSRC/Environmental Technology Best Practice Programme (ETBPP) and Fluid Dynamic International Ltd. for a grant under the Link (WMR03) programme
Recommended from our members
Simultaneous recovery of metals and degradation of organic species: Copper and 2,4,5-trichlorophenoxyacetic acid (2,4,5-T)
In mixed wastewater streams, the presence of metal ions can retard the destruction of organic contaminants and the efficiency of recovery of the metal is reduced by the presence of organic species. The reduction in the efficiency of these methods is due to the formation of complexes between the organic species and the metal ions in solution. Results are presented for copper - 2,4,5-T system in which both effects occur. A photolytic cell alone can achieve the complete degradation of 2,4,5-T, in the presence of TiO2 or H2O2, at pH 3.5. The addition of Cu(II) ions, however, retard the degradation of 2,4,5-T and complete mineralization of 2,4,5-T was not achieved and the system also leaves Cu(II) ions in solution. An electrolytic cell alone can be used to recover copper in pH range 1.5 – 4.5 but is not capable of achieving complete disappearance of 2,4,5-T by anodic oxidation. A combined photolytic – electrolytic system is capable of achieving simultaneous destruction of 2,4,5-T and recovery of copper from mixed wastewater streams at pH 3.5. The percentage destruction of 2,4,5-T and the recovery of copper can be increased further by using a combined photolytic and an activated carbon concentrator cell system. This system can achieve the simultaneous recovery of copper and the degradation of 2,4,5-T without the use of an additional oxidants or catalysts.Pakistan High Commissio
Recommended from our members
Concentrator cell methodology in the regeneration and recycle of chromium etching solutions using membrane technology
The regeneration of chromium (VI) and the recovery of etched copper from chromium etching solutions by electrodialysis is improved by the addition of a concentrator cell, using ion exchange resins or activated carbon cloth as concentrator media, in the catholyte chamber. The maximum percentages for the regeneration of chromium and recovery of copper in these systems is however less than 80 and 90% respectively because of the competition between the processes of oxidation of Cr(III) and electrodeposition of copper. A novel combination of electrolysis with electrodialysis and concentrator cell technology is developed that achieves 92.1% chromium regeneration and 90.4% copper recovery.EPSRC/DTI through the Link WMR03 programme and to Fluid Dynamics International Ltd. for financial support
Recovery of lubricant base oils using ionic liquid processes
Two novel low-temperature ionic liquid processes are developed for the recovery of base oils from waste lubricant oils. One uses 3-(triethoxysilyl)-propylammonium-3-(triethoxysilyl)-propyl carbamate (TESAC), in which the waste lubricant base oil is insoluble, and the other uses trihexyl(tetradecyl)phosphonium chloride (P6,6,6,14Cl) in which the base oil is soluble. In the 3-aminopropyl-triethoxysilane (TESA)/TESAC process, waste oil components, including the base oil, are dissolved in the solvent TESA which is converted, in situ, with carbon dioxide to TESAC, recovering the base oil as an insoluble layer. In the P6,6,6,14Cl process, the base oil is separated from most additives as a solution in the ionic liquid from which it can be extracted with methanol. The recovered oils from both processes have properties consistent with lubricant oils in commercial use and the ionic liquids can be recovered for recycle minimising reagent use and providing a route to closed-loop base oil recovery and recycle
Use of extraction chromatography in the recycling of critical metals from thin film Leach solutions
Phosphors and optoelectronic thin film electronic device layers contain critical metals including lanthanides and indium that should be recycled. Solvent impregnated resins (SIRs) containing (i) DEHPA (ii) DODGAA and (iii) DODGAA with the ionic liquid [C4mim][Tf2N] are investigated in extraction chromatography methodologies to recover and separate critical metals from dilute solutions that model those leached from thin films. Optimum adsorption of metals occurs at pH 1.5-3.5 but is highest on DODGAA-[C4mim][Tf2N]. The recovery and separation of adsorbed metal species on the DODGAA-[C4mim][Tf2N] SIR resin from solutions containing the glass matrix ions, Ca(II) and Al(III), along with In(III) and Sn(IV) or lanthanide ions is achieved by elution with HNO3. Ca(II) and Al(III) are completely eluted with 0.1M HNO3 retaining the target critical metal species on the resin. Separation of In from Sn is achieved by elution of In(III) with 2.5M HNO3 and Sn(IV) with 5M acid. La is separated from the other lanthanides by elution of La(III) with 2.5M HNO3 and the remaining lanthanides with 5M acid. The SIR resins can be reused over a series of at least five cycles of loading, stripping, and rinsing to reduce reagent costs and achieve economic critical metal recovery by extraction chromatography
Using honey to heal diabetic foot ulcers
Diabetic ulcers seem to be arrested in the inflammatory/proliferative stage of the healing process, allowing infection and inflammation to preclude healing. Antibiotic-resistant bacteria have become a major cause of infections, including diabetic foot infections. It is proposed here that the modern developments of an ancient and traditional treatment for wounds, dressing them with honey, provide the solution to the problem of getting diabetic ulcers to move on from the arrested state of healing. Honeys selected to have a high level of antibacterial activity have been shown to be very effective against antibiotic-resistant strains of bacteria in laboratory and clinical studies. The potent anti-inflammatory action of honey is also likely to play an important part in overcoming the impediment to healing that inflammation causes in diabetic ulcers, as is the antioxidant activity of honey. The action of honey in promotion of tissue regeneration through stimulation of angiogenesis and the growth of fibroblasts and epithelial cells, and its insulin-mimetic effect, would also be of benefit in stimulating the healing of diabetic ulcers. The availability of honey-impregnated dressings which conveniently hold honey in place on ulcers has provided a means of rapidly debriding ulcers and removing the bacterial burden so that good healing rates can be achieved with neuropathic ulcers. With ischemic ulcers, where healing cannot occur because of lack of tissue viability, these honey dressings keep the ulcers clean and prevent infection occurring
Geriatric hip fracture clinical pathway: the Hong Kong experience
Geriatric hip fracture is one of the commonest fractures in orthopaedic trauma. There is a trend of further increase in its incidence in the coming decades. Besides the development of techniques and implants to overcome the difficulties in fixation of osteoporosis bone, the general management of the hip fracture is also very challenging in terms of the preparation of the generally poorer pre-morbid state and complicate social problems associated with this group of patients. In order to cope with the increasing demand, our hospital started a geriatric hip fracture clinical pathway in 2007. The aim of this pathway is to provide better care for this group of patients through multidisciplinary approach. From year 2007 to 2009, we had managed 964 hip fracture patients. After the implementation of the pathway, the pre-operative and the total length of stay in acute hospital were shortened by over 5 days. Other clinical outcomes including surgical site infection, 30 days mortality and also incidence of pressure sore improved when compared to the data before the pathway. The rate of surgical site infection was 0.98%, and the 30 days mortality was 1.67% in 2009. The active participation of physiotherapists, occupational therapists as well as medical social workers also helped to formulate the discharge plan as early as the patient is admitted. In conclusion, a well-planned and executed clinical pathway for hip fracture can improve the clinical outcomes of the geriatric hip fractures
Defects, Dopants and Sodium Mobility in Na<sub>2</sub>MnSiO<sub>4</sub>
Sodium manganese orthosilicate, Na2MnSiO4, is a promising positive electrode material in rechargeable sodium ion batteries. Atomistic scale simulations are used to study the defects, doping behaviour and sodium migration paths in Na2MnSiO4. The most favourable intrinsic defect type is the cation anti-site (0.44 eV/defect), in which, Na and Mn exchange their positions. The second most favourable defect energy process is found to be the Na Frenkel (1.60 eV/defect) indicating that Na diffusion is assisted by the formation of Na vacancies via the vacancy mechanism. Long range sodium paths via vacancy mechanism were constructed and it is confirmed that the lowest activation energy (0.81 eV) migration path is three dimensional with zig-zag pattern. Subvalent doping by Al on the Si site is energetically favourable suggesting that this defect engineering stratergy to increase the Na content in Na2MnSiO4 warrants experimental verification
Prevalence of Chlamydia trachomatis infection among women in a Middle Eastern community
BACKGROUND: Common vaginal infections that manifest in women are usually easily diagnosed. However, Chlamydia infection is often asymptomatic, leading to infertility before it is detected. If it occurs in pregnancy, it could lead to significant neonatal morbidity. It may also play a role with other viral infections for e.g. Human Papilloma Virus in the development of cervical cancer. The objective of this study was to determine the prevalence of Chlamydia infection in women undergoing screening for cervical abnormalities as a part of a research project in primary and secondary care institutions in the United Arab Emirates. METHODS: In this cross sectional study married women attending primary and secondary care participating in a large nationwide cervical abnormalities screening survey were offered Chlamydia testing using a commercially available test kit. This kit uses a rapid immunoassay for the direct detection of Chlamydia trachomatis antigen in endocervical swab specimens. As this study was performed in a traditional Islamic country, unmarried women were excluded from testing, as the management of any positive cases would create legal and social problems. All married women consenting to take part in the study were included irrespective of age. RESULTS: Of 1039 women approached over a period of eight months 919 (88.5%) agreed to participate. The number of women in the 16 to 19 years was small (0.01%) and 30% were aged over 40 years. The prevalence of Chlamydia infection in this study was 2.6% (95% confidence interval 1.2–3.3%), which was marginally higher in women screened in secondary care (p = 0.05). CONCLUSION: This is one of the few reports on the prevalence of Chlamydia infection in women from the Middle East. Due to cultural and social constraints this study excluded a large proportion of women aged less than 19 years of age. Hence no direct comparisons on prevalence could be made with studies from the West, which all included younger women at high risk of Chlamydia. However this study emphasizes the importance of cultural factors while interpreting results of studies from different cultures and communities
Recommended from our members
Genetic analysis reveals a hierarchy of interactions between polycystin-encoding genes and genes controlling cilia function during left-right determination
During mammalian development, left-right (L-R) asymmetry is established by a cilia-driven leftward fluid flow within a midline embryonic cavity called the node. This ‘nodal flow’ is detected by peripherally-located crown cells that each assemble a primary cilium which contain the putative Ca2+ channel PKD2. The interaction of flow and crown cell cilia promotes left side-specific expression of Nodal in the lateral plate mesoderm (LPM). Whilst the PKD2-interacting protein PKD1L1 has also been implicated in L-R patterning, the underlying mechanism by which flow is detected and the genetic relationship between Polycystin function and asymmetric gene expression remains unknown. Here, we characterize a Pkd1l1 mutant line in which Nodal is activated bilaterally, suggesting that PKD1L1 is not required for LPM Nodal pathway activation per se, but rather to restrict Nodal to the left side downstream of nodal flow. Epistasis analysis shows that Pkd1l1 acts as an upstream genetic repressor of Pkd2. This study therefore provides a genetic pathway for the early stages of L-R determination. Moreover, using a system in which cultured cells are supplied artificial flow, we demonstrate that PKD1L1 is sufficient to mediate a Ca2+ signaling response after flow stimulation. Finally, we show that an extracellular PKD domain within PKD1L1 is crucial for PKD1L1 function; as such, destabilizing the domain causes L-R defects in the mouse. Our demonstration that PKD1L1 protein can mediate a response to flow coheres with a mechanosensation model of flow sensation in which the force of fluid flow drives asymmetric gene expression in the embryo
- …