620 research outputs found

    Linear MIM-Width of Trees

    Full text link
    We provide an O(nlogn)O(n \log n) algorithm computing the linear maximum induced matching width of a tree and an optimal layout.Comment: 19 pages, 7 figures, full version of WG19 paper of same nam

    Facile Fabrication of Ultrafine Copper Nanoparticles in Organic Solvent

    Get PDF
    A facile chemical reduction method has been developed to fabricate ultrafine copper nanoparticles whose sizes can be controlled down to ca. 1 nm by using poly(N-vinylpyrrolidone) (PVP) as the stabilizer and sodium borohyrdride as the reducing agent in an alkaline ethylene glycol (EG) solvent. Transmission electron microscopy (TEM) results and UV–vis absorption spectra demonstrated that the as-prepared particles were well monodispersed, mostly composed of pure metallic Cu nanocrystals and extremely stable over extended period of simply sealed storage

    Application of functionalized nanofluid in thermosyphon

    Get PDF
    A water-based functionalized nanofluid was made by surface functionalizing the ordinary silica nanoparticles. The functionalized nanofluid can keep long-term stability. and no sedimentation was observed. The functionalized nanofluid as the working fluid is applied in a thermosyphon to understand the effect of this special nanofluid on the thermal performance of the thermosyphon. The experiment was carried out under steady operating pressures. The same work was also explored for traditional nanofluid (consisting of water and the same silica nanoparticles without functionalization) for comparison. Results indicate that a porous deposition layer exists on the heated surface of the evaporator during the operating process using traditional nanofluid; however, no coating layer exists for functionalized nanofluid. Functionalized nanofluid can enhance the evaporating heat transfer coefficient, while it has generally no effect on the maximum heat flux. Traditional nanofluid deteriorates the evaporating heat transfer coefficient but enhances the maximum heat flux. The existence of the deposition layer affects mainly the thermal performance, and no meaningful nanofluid effect is found in the present study

    Precursor or Sequela: Pathological Disorders in People with Internet Addiction Disorder

    Get PDF
    Background: This study aimed to evaluate the roles of pathological disorders in Internet addiction disorder and identify the pathological problems in IAD, as well as explore the mental status of Internet addicts prior to addiction, including the pathological traits that may trigger Internet addiction disorder. Methods and Findings: 59 students were measured by Symptom CheckList-90 before and after they became addicted to the Internet. A comparison of collected data from Symptom Checklist-90 before Internet addiction and the data collected after Internet addiction illustrated the roles of pathological disorders among people with Internet addiction disorder. The obsessive-compulsive dimension was found abnormal before they became addicted to the Internet. After their addiction, significantly higher scores were observed for dimensions on depression, anxiety, hostility, interpersonal sensitivity, and psychoticism, suggesting that these were outcomes of Internet addiction disorder. Dimensions on somatisation, paranoid ideation, and phobic anxiety did not change during the study period, signifying that these dimensions are not related to Internet addiction disorder. Conclusions: We can not find a solid pathological predictor for Internet addiction disorder. Internet addiction disorder ma

    Low-Temperature Preparation of Superparamagnetic CoFe2O4 Microspheres with High Saturation Magnetization

    Get PDF
    Based on a low-temperature route, monodispersed CoFe2O4 microspheres (MSs) were fabricated through aggregation of primary nanoparticles. The microstructural and magnetic characteristics of the as-prepared MSs were characterized by X-ray diffraction/photoelectron spectroscopy, scanning/transmitting electron microscopy, and vibrating sample magnetometer. The results indicate that the diameters of CoFe2O4 MSs with narrow size distribution can be tuned from over 200 to ~330 nm. Magnetic measurements reveal these MSs exhibit superparamagnetic behavior at room temperature with high saturation magnetization. Furthermore, the mechanism of formation of the monodispersed CoFe2O4 MSs was discussed on the basis of time-dependent experiments, in which hydrophilic PVP plays a crucial role

    Using Magnetically Responsive Tea Waste to Remove Lead in Waters under Environmentally Relevant Conditions

    Get PDF
    We report the use of a simple yet highly effective magnetite-waste tea composite to remove lead(II) (Pb[superscript 2+]) ions from water. Magnetite-waste tea composites were dispersed in four different types of water–deionized (DI), artificial rainwater, artificial groundwater and artificial freshwater–that mimic actual environmental conditions. The water samples had varying initial concentrations (0.16–5.55 ppm) of Pb[superscript 2+] ions and were mixed with the magnetite-waste tea composite for at least 24 hours to allow adsorption of the Pb[superscript 2+] ions to reach equilibrium. The magnetite-waste tea composites were stable in all the water samples for at least 3 months and could be easily removed from the aqueous media via the use of permanent magnets. We detected no significant leaching of iron (Fe) ions into the water from the magnetite-waste tea composites. The percentage of Pb adsorbed onto the magnetite-waste tea composite ranged from ~70% to 100%; the composites were as effective as activated carbon (AC) in removing the Pb[superscript 2+] ions from water, depending on the initial Pb concentration. Our prepared magnetite-waste tea composites show promise as a green, inexpensive and highly effective sorbent for removal of Pb in water under environmentally realistic conditions.SUTD-MIT International Design Center (Research Grant IDG11200105/IDD11200109)Singapore-MIT Allianc

    Allergy from infancy to adolescence. A population-based 18-year follow-up cohort

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>Anxious parents have many concerns about the future health of their atopic infants. Paediatricians and primary care practitioners need to seek knowledge on long-term outcomes in order to cope with the increasing caseload of suspected allergy and the concerns of parents. The aim of the study was to assess suspected and diagnosed allergy in infancy as predictors of allergy and asthma in adolescence.</p> <p>Methods</p> <p>Families expecting their first baby and making their first visit to a maternity health care clinic in 1986 were selected as the study population in a random sample. There were 1278 eligible study families. The data were provided of the children at the ages of 9 and 18 months and 3, 5, 12, 15 and 18 years by health care professionals, parents, and adolescents (themselves).</p> <p>Results</p> <p>At the age of 9 months, the prevalence of allergy suspicions was distinctly higher than that of allergy diagnoses. At the age of five years suspected allergy approaches were nil, and the prevalence of diagnosed allergy was about 9%. During the adolescence, the prevalence of self-reported allergy increases steadily up to the age of 18 years, and that of asthma remains at approximately 5%. Suspected allergy at the age of 9 or 18 months and at the 5 years of age does not predict allergy at adolescence. Compared with non-allergic children, children with definite allergy at the age of 5 were over 8 times more likely to have allergy and nearly 7 times more likely to have asthma in adolescence.</p> <p>Conclusion</p> <p>An early ascertained diagnosis of allergy, but not suspicions of allergy, predicts prevailing allergy in adolescence. Efforts need to be focused on accurate diagnosis of early childhood allergies.</p

    The expression of Gli3, regulated by HOXD13, may play a role in idiopathic congenital talipes equinovarus

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>Idiopathic congenital talipes equinovarus (ICTEV) is a congenital limb deformity. Based on extended transmission disequilibrium testing, <it>Gli-Kruppel family member 3 </it>(<it>Gli3</it>) has been identified as a candidate gene for ICTEV. Here, we verify the role of <it>Gli3 </it>in ICTEV development.</p> <p>Methods</p> <p>Using the rat ICTEV model, we analyzed the differences in <it>Gli3 </it>expression levels between model rats and normal control rats. We used luciferase reporter gene assays and ChIP/EMSA assays to analyze the regulatory elements of <it>Gli3</it>.</p> <p>Results</p> <p><it>Gli3 </it>showed higher expression levels in ICTEV model rats compared to controls (P < 0.05). We identified repressor and activator regions in the rat <it>Gli3 </it>promoter. The <it>Gli3 </it>promoter also contains two putative Hoxd13 binding sites. Using EMSA, the Hoxd13 binding site 2 was found to directly interact with Hoxd13 <it>in vitro</it>. ChIP assays of the Hoxd13-<it>Gli3 </it>promoter complex from a developing limb confirmed that endogenous Hoxd13 interacts with this region <it>in vivo</it>.</p> <p>Conclusion</p> <p>Our findings suggest that <it>HoxD13 </it>directly interacts with the promoter of <it>Gli3</it>. The increase of <it>Gli3 </it>expression in ICTEV model animal might result from the low expression of <it>HoxD13</it>.</p
    corecore