Yield versus ablator roughness for a graded Ge doped plastic ablator LMJ capsule

A base-line capsule design for the Laser MegaJoule facility is optimized by radially grading the Ge dopant in plastic ablator. A one dimensional robustness study is performed to optimize the implosion and the entropy deposition. Then, the tolerance versus the ablator roughness is examined for modes over 10 through direct two-dimensional simulations. The stability is significantly higher than that of an uniformly doped design

Progress of LMJ-relevant implosions experiments on OMEGA

In preparation of the first ignition attempts on the Laser Mégajoule (LMJ), an experimental program is being pursued on OMEGA to investigate LMJ-relevant hohlraums. First, radiation temperature levels close to 300 eV were recently achieved in reduced-scale hohlraums with modest backscatter losses. Regarding the baseline target design for fusion experiments on LMJ, an extensive experimental database has also been collected for scaled implosions experiments in both empty and gas-filled rugby-shaped hohlraums. We acquired a full picture of hohlraum energetics and implosion dynamics. Not only did the rugby hohlraums show significantly higher x-ray drive energy over the cylindrical hohlraums, but symmetry control by power balance was demonstrated, as well as high-performance D2 implosions enabling the use of a complete suite of neutrons diagnostics. Charged particle diagnostics provide complementary insights into the physics of these x-ray driven implosions. An overview of these results demonstrates our ability to control the key parameters driving the implosion, lending more confidence in extrapolations to ignition-scale targets

Progress of LMJ-relevant implosions experiments on OMEGA

In preparation of the first ignition attempts on the Laser Mégajoule (LMJ), an experimental program is being pursued on OMEGA to investigate LMJ-relevant hohlraums. First, radiation temperature levels close to 300 eV were recently achieved in reduced-scale hohlraums with modest backscatter losses. Regarding the baseline target design for fusion experiments on LMJ, an extensive experimental database has also been collected for scaled implosions experiments in both empty and gas-filled rugby-shaped hohlraums. We acquired a full picture of hohlraum energetics and implosion dynamics. Not only did the rugby hohlraums show significantly higher x-ray drive energy over the cylindrical hohlraums, but symmetry control by power balance was demonstrated, as well as high-performance D2 implosions enabling the use of a complete suite of neutrons diagnostics. Charged particle diagnostics provide complementary insights into the physics of these x-ray driven implosions. An overview of these results demonstrates our ability to control the key parameters driving the implosion, lending more confidence in extrapolations to ignition-scale targets

Study of shock-coalescence on the LIL laser facility

We use the LIL (Ligne d'Intégration Laser) facility to study the coalescence of two planar shocks in an indirectly-driven planar sample of polystyrene. This experiment represents the preliminary stage of the future shock-timing campaign for the Laser Megajoule (LMJ). The main objectives are to validate the experimental concept and to test the numerical simulations. We used a gold spherical hohlraum to convert into X-ray the 351 nm wavelength laser pulse and to initiate the two shocks in the sample. To access time resolved shock velocities and temperature, we used two rear-side diagnostics: a VISAR (Velocity Interferometer System for Any Reflection) working at two different wavelengths and a streaked optical self-emission diagnostic. We observed the coalesced shock, in good agreement with the numerical simulations. We also observed a loss of signal during the first nanoseconds probably due to sample heating from the hohlraum X-ray flux

Study of shock-coalescence on the LIL laser facility

We use the LIL (Ligne d'Intégration Laser) facility to study the coalescence of two planar shocks in an indirectly-driven planar sample of polystyrene. This experiment represents the preliminary stage of the future shock-timing campaign for the Laser Megajoule (LMJ). The main objectives are to validate the experimental concept and to test the numerical simulations. We used a gold spherical hohlraum to convert into X-ray the 351 nm wavelength laser pulse and to initiate the two shocks in the sample. To access time resolved shock velocities and temperature, we used two rear-side diagnostics: a VISAR (Velocity Interferometer System for Any Reflection) working at two different wavelengths and a streaked optical self-emission diagnostic. We observed the coalesced shock, in good agreement with the numerical simulations. We also observed a loss of signal during the first nanoseconds probably due to sample heating from the hohlraum X-ray flux

Update on ignition studies at CEA

This article sums up the theoretical and experimental studies about ignition. Three experiments are salient this year on the Omega laser in collaboration with DOE laboratories (1) 3 cones of beams allow to mimic the LMJ configuration and to get symmetry measurements. (2) We measured perturbations due to hydro-instability in CHGe planar samples with face-on and side-on radiographs. (3) We improved our nuclear diagnostics, particularly the neutron image system tested on direct drive implosions. As far as LMJ target design is concerned, we defined a preliminary domain corresponding to the possible operation at 2ω. At 3ω we studied the low mode instability effects on the DT deformation (due to the laser or to the target) and on the yield. The stability is clearly improved with graded doped CH for our nominal capsule L1215

Experimental investigation of the collective stimulated Brillouin and Raman scattering of multiple laser beams in Inertial Confinement Fusion experiments

International audienc