2,414 research outputs found
Cationic sterically stabilized diblock copolymer nanoparticles exhibit exceptional tolerance toward added salt
For certain commercial applications such as enhanced oil recovery, sterically stabilized colloidal dispersions that exhibit high tolerance toward added salt are desirable. Herein, we report a series of new cationic diblock copolymer nanoparticles that display excellent colloidal stability in concentrated aqueous salt solutions. More specifically, poly(2-(acryloyloxy)ethyltrimethylammonium chloride) (PATAC) has been chain-extended by reversible addition–fragmentation chain transfer aqueous dispersion polymerization of diacetone acrylamide (DAAM) at 70 °C to produce PATAC100–PDAAMx diblock copolymer spheres at 20% w/w solids via polymerization-induced self-assembly. Transmission electron microscopy and dynamic light scattering (DLS) analysis confirm that the mean sphere diameter can be adjusted by systematic variation of the mean degree of polymerization of the PDAAM block. Remarkably, DLS studies confirm that highly cationic PATAC100–PDAAM1500 spheres retain their colloidal stability in the presence of either 4.0 M KCl or 3.0 M ammonium sulfate for at least 115 days at 20 °C. The mole fraction of PATAC chains within the stabilizer shell was systematically varied by the chain extension of various binary mixtures of non-ionic poly(N,N-dimethylacrylamide) (PDMAC) and cationic PATAC with DAAM to produce ([n] PATAC100 + [1 – n] PDMAC67)–PDAAMz diblock copolymer spheres at 20% w/w. DLS studies confirmed that a relatively high mole fraction of cationic PATAC stabilizer chains (n ≥ 0.75) is required for the dispersions to remain colloidally stable in 4.0 M KCl. Cationic worms and vesicles could also be synthesized using a binary mixture of PATAC and PDMAC precursors, where n = 0.10. However, the vesicles only remained colloidally stable up to 1.0 M KCl, whereas the worms proved to be stable up to 2.0 M KCl. Such block copolymer nanoparticles are expected to be useful model systems for understanding the behavior of aqueous colloidal dispersions in extremely salty media. Finally, zeta potentials determined using electrophoretic light scattering are presented for such nanoparticles dispersed in highly salty media
Verifying the Safety of a Flight-Critical System
This paper describes our work on demonstrating verification technologies on a
flight-critical system of realistic functionality, size, and complexity. Our
work targeted a commercial aircraft control system named Transport Class Model
(TCM), and involved several stages: formalizing and disambiguating requirements
in collaboration with do- main experts; processing models for their use by
formal verification tools; applying compositional techniques at the
architectural and component level to scale verification. Performed in the
context of a major NASA milestone, this study of formal verification in
practice is one of the most challenging that our group has performed, and it
took several person months to complete it. This paper describes the methodology
that we followed and the lessons that we learned.Comment: 17 pages, 5 figure
Exact Solutions for Matter-Enhanced Neutrino Oscillations
The analogy between supersymmetric quantum mechanics and matter-enhanced
neutrino oscillations is exploited to obtain exact solutions for a class of
electron density profiles. This integrability condition is analogous to the
shape-invariance in supersymmetric quantum mechanics. This method seems to be
the most direct way to obtain the exact survival probabilities for a number of
density profiles of interest, such as linear and exponential density profiles.
The resulting neutrino amplitudes can also be utilized as comparison amplitudes
for the uniform semiclassical treatment of neutrino propagation in arbitrary
electron density profiles.Comment: Submitted to Physical Review D. Latex file, 8 pages. This paper is
also available at http://nucth.physics.wisc.edu/preprints
A wider Europe? The view from Russia, Belarus and Ukraine
On the evidence of national surveys conducted between 2000 and 2006, there is a declining sense of European self-identity in the three Slavic post-Soviet republics of Russia, Belarus and Ukraine. Attitudes towards the European Union and the possibility of membership are broadly supportive, but with a substantial proportion who find it difficult to express a view, and substantial proportions are poorly informed in comparison with the general public in EU member or prospective member countries. Those who are better informed are more likely to favour EU membership and vice versa. Generally, socioeconomic characteristics (except for age and region) are relatively poor predictors of support for EU membership as compared with attitudinal variables. But ‘Europeanness’ should not be seen as a given, and much will depend on whether EU member countries emphasize what is common to east and west or establish ‘new dividing lines’ in place of those of the cold war
Effects of total and regional fat loss on plasma CRP and IL-6 in overweight and obese, older adults with knee osteoarthritis
SummaryObjectiveTo describe associations between total and regional body fat mass loss and reduction of systemic levels of inflammation (C-reactive protein (CRP) and interleukin-6 (IL-6)) in obese, older adults with osteoarthritis (OA), undergoing intentional weight loss.DesignData come from a single-blind, 18-month, randomized controlled trial in adults (age: 65.6 ± 6.2; Body mass index (BMI): 33.6 ± 3.7) with knee OA. Participants were randomized to diet-induced weight loss plus exercise (D + E; n = 150), diet-induced weight loss-only (D; n = 149), or exercise-only (E; n = 151). Total body and region-specific (abdomen and thigh) fat mass were measured at baseline and 18 months. High-sensitivity CRP and IL-6 were measured at baseline, six and 18 months. Intervention effects were assessed using mixed models and associations between inflammation and adiposity were compared using logistic and mixed linear regression models.ResultsIntentional total body fat mass reduction was associated with significant reductions in log-adjusted CRP (β = 0.06 (95% CI = 0.04, 0.08) mg/L) and IL-6 (β = 0.02 (95% CI = 0.01, 0.04) pg/mL). Loss of abdominal fat volume was also associated with reduced inflammation, independent of total body fat mass; although models containing measures of total adiposity yielded the best fit. The odds of achieving clinically desirable levels of CRP (<3.0 mg/L) and IL-6 (<2.5 pg/mL) were 3.8 (95% CI = 1.6, 8.9) and 2.2 (95% CI = 1.1, 4.6), respectively, with 5% total weight and fat mass loss.ConclusionsAchievement of clinically desirable levels of CRP and IL-6 more than double with intentional 5% loss of total body weight and fat mass. Global, rather than regional, measures of adiposity are better predictors of change in inflammatory burden.Clinical Trial Registration NumberNCT00381290
Synthesis of high molecular weight water-soluble polymers as low-viscosity latex particles by RAFT aqueous dispersion polymerization in highly salty media
We report the synthesis of sterically-stabilized diblock copolymer particles at 20% w/w solids via reversible addition–fragmentation chain transfer (RAFT) aqueous dispersion polymerization of N,N′-dimethylacrylamide (DMAC) in highly salty media (2.0 M (NH4)2SO4). This is achieved by selecting a well-known zwitterionic water-soluble polymer, poly(2-(methacryloyloxy)ethyl phosphorylcholine) (PMPC), to act as the salt-tolerant soluble precursor block. A relatively high degree of polymerization (DP) can be targeted for the salt-insoluble PDMAC block, which leads to the formation of a turbid free-flowing dispersion of PDMAC-core particles by a steric stabilization mechanism. 1H NMR spectroscopy studies indicate that relatively high DMAC conversions (>99%) can be achieved within a few hours at 30 °C. Aqueous GPC analysis indicates high blocking efficiencies and unimodal molecular weight distributions, although dispersities increase monotonically as higher degrees of polymerization (DPs) are targeted for the PDMAC block. Particle characterization techniques include dynamic light scattering (DLS) and electrophoretic light scattering (ELS) using a state-of-the-art instrument that enables accurate ζ potential measurements in a concentrated salt solution. 1H NMR spectroscopy studies confirm that dilution of the as-synthesized dispersions using deionized water lowers the background salt concentration and hence causes in situ molecular dissolution of the salt-intolerant PDMAC chains, which leads to a substantial thickening effect and the formation of transparent gels. Thus, this new polymerization-induced self-assembly (PISA) formulation enables high molecular weight water-soluble polymers to be prepared in a highly convenient, low-viscosity form. In principle, such aqueous PISA formulations are highly attractive: there are various commercial applications for high molecular weight water-soluble polymers, while the well-known negative aspects of using a RAFT agent (i.e., its cost, color, and malodor) are minimized when targeting such high DPs
Extragenic suppressor mutations in ΔripA disrupt stability and function of LpxA
Background: Francisella tularensis is a Gram-negative bacterium that infects hundreds of species including humans, and has evolved to grow efficiently within a plethora of cell types. RipA is a conserved membrane protein of F. tularensis, which is required for growth inside host cells. As a means to determine RipA function we isolated and mapped independent extragenic suppressor mutants in ΔripA that restored growth in host cells. Each suppressor mutation mapped to one of two essential genes, lpxA or glmU, which are involved in lipid A synthesis. We repaired the suppressor mutation in lpxA (S102, LpxA T36N) and the mutation in glmU (S103, GlmU E57D), and demonstrated that each mutation was responsible for the suppressor phenotype in their respective strains. We hypothesize that the mutation in S102 altered the stability of LpxA, which can provide a clue to RipA function. LpxA is an UDP-N-acetylglucosamine acyltransferase that catalyzes the transfer of an acyl chain from acyl carrier protein (ACP) to UDP-N-acetylglucosamine (UDP-GlcNAc) to begin lipid A synthesis. Results: LpxA was more abundant in the presence of RipA. Induced expression of lpxA in the ΔripA strain stopped bacterial division. The LpxA T36N S102 protein was less stable and therefore less abundant than wild type LpxA protein. Conclusion: These data suggest RipA functions to modulate lipid A synthesis in F. tularensis as a way to adapt to the host cell environment by interacting with LpxA
Cosmic microwave background anisotropy power spectrum statistics for high precision cosmology
As the era of high precision cosmology approaches, the empirically determined
power spectrum of the microwave background anisotropy, , will provide a
crucial test for cosmological theories. We present a unified semi-analytic
framework for the study of the statistical properties of the coefficients
computed from the results of balloon, ground based, and satellite experiments.
An illustrative application shows that commonly used approximations {\it bias}
the estimation of the baryon parameter at the 1% level even for a
satellite capturing as much as % of the sky.Comment: 4 pages, 3 figures. Also available at
http://www.tac.dk/~wandelt/downloads.htm
- …