30,708 research outputs found

    Surface protection

    Get PDF
    The surface protection subproject consists of three major thrusts: airfoil deposition model; metallic coating life prediction; and thermal barrier coating (TBC) life prediction. The time frame for each of these thrusts and the expected outputs are presented. Further details are given for each thrust such as specific element schedules and the status of performance; in-house, via grant, or via contract

    High temperature surface protection

    Get PDF
    Alloys of the MCrAlX type are the basis for high temperature surface protection systems in gas turbines. M can be one or more of Ni, Co, or Fe and X denotes a reactive metal added to enhance oxide scale adherence. The selection and formation as well as the oxidation, hot corrosion and thermal fatigue performance of MCrAlX coatings are discussed. Coatings covered range from simple aluminides formed by pack cementation to the more advanced physical vapor deposition overlay coatings and developmental plasma spray deposited thermal barrier coatings

    Hot hardness of nickel-rich nickel-chromium-aluminum alloys

    Get PDF
    Rockwell A hardness of cast nickel-chromium-aluminum (NiCrAl) alloys was examined from ambient to 1150 K and compared to cast NiAl and IN-100. Alloy constitution was either gamma, gamma prime + gamma or gamma + beta + alpha + gamma prime. Below 1000 K beta containing NiCrAl alloys have hardnesses comparable to IN-100; above 1000 K they soften faster than IN-100. At 1150 K the hardness of beta-containing NiCrAl alloys decreases with increasing beta-content. The beta-containing NiCrAl alloys were harder than beta-NiAl. The ultimate tensile strengths of the NiCrAl alloys were estimated. The effects of NiCrAl coatings on strength and fatigue life of cooled turbine components were deduced

    Cyclic furnace and high velocity oxidation of an aluminide-coated high-strength nickel alloy (B-1900)

    Get PDF
    Cyclic furnace and high velocity oxidation of aluminide-coated high strength nickel alloy (B-1900

    Ceramic composites: Enabling aerospace materials

    Get PDF
    Ceramics and ceramic matrix composites (CMC) have the potential for significant impact on the performance of aerospace propulsion and power systems. In this paper, the potential benefits are discussed in broad qualitative terms and are illustrated by some specific application case studies. The key issues in need of resolution for the potential of ceramics to be realized are discussed

    Thermodynamics and kinetics of pack aluminide coating formation on IN-100

    Get PDF
    An investigation of the effects of pack variables on the formation of aluminide coatings on nickel-base superalloy IN-100 was conducted. Also, the thermodynamics and kinetics of coating formation were analyzed. Observed coating weights were in good agreement with predictions made from the analysis. Pack temperature rather than pack aluminum activity controls the principal coating phase formed. In 1 weight percent aluminum packs, aluminum weight gains were related to the halide pack activator. Solid-state nickel diffusion controlled coating formation from sodium fluoride and chloride and ammonium fluoride activated packs. In other ammonium and sodium halide activated 1 weight percent aluminum packs, gaseous diffusion controlled coating formation

    Thermal-barrier coatings for utility gas turbines

    Get PDF
    The potential of thermal barrier coatings for use in utility gas turbines was assessed. Pressurized passage and ambient pressure doped fuel burner rig tests revealed that thermal barrier coatings are not resistant to dirty combustion environments. However, present thermal barrier coatings, such as duplex partially stabilized zirconia and duplex Ca2SiO4 have ample resistance to the thermo-mechanical stress and temperature levels anticipated for heavy duty gas turbines firing clean fuel as revealed by clean fuel pressurized passage and ambient pressure burner rig tests. Thus, it is appropriate to evaluate such coatings on blades, vanes and combustors in the field. However, such field tests should be backed up with adequate effort in the areas of coating application technology and design analysis so that the field tests yield unequivocal results

    A Low Cost and Labor Efficient Method for Rearing Black Cutworms (Lepidoptera: Noctuidae)

    Get PDF
    The black cutworm, Agrotis ipsilon (Hufnagel), has been and continues to be the subject of many biological and control studies in the north-central states. Interest in this insect can often be traced to its status as a major, but sporadic pest of field com in the region

    A study of an electric field measuring instrument

    Get PDF
    Cesium ion beam electric field measuring instrument

    A study of charged particle motion in magnetic radiation shielding fields Final technical report

    Get PDF
    Charged particle motion in magnetic radiation shielding field
    corecore