Thermal and dissipative effects in Casimir physics

We report on current efforts to detect the thermal and dissipative contributions to the Casimir force. For the thermal component, two experiments are in progress at Dartmouth and at the Institute Laue Langevin in Grenoble. The first experiment will seek to detect the Casimir force at the largest explorable distance using a cylinder-plane geometry which offers various advantages with respect to both sphere-plane and parallel-plane geometries. In the second experiment, the Casimir force in the parallel-plane configuration is measured with a dedicated torsional balance, up to 10 micrometers. Parallelism of large surfaces, critical in this configuration, is maintained through the use of inclinometer technology already implemented at Grenoble for the study of gravitationally bound states of ultracold neutrons, For the dissipative component of the Casimir force, we discuss detection techniques based upon the use of hyperfine spectroscopy of ultracold atoms and Rydberg atoms. Although quite challenging, this triad of experimental efforts, if successful, will give us a better knowledge of the interplay between quantum and thermal fluctuations of the electromagnetic field and of the nature of dissipation induced by the motion of objects in a quantum vacuum.Comment: Contribution to QFEXT'06, appeared in special issue of Journal of Physics

Forced instability of core-annular flow in capillary constrictions

Instability of fluid cylinders and jets, a highly nonlinear hydrodynamic phenomenon, has fascinated researchers for nearly 150 years. A subset of the phenomenon is the core-annular flow, in which a non-wetting core fluid and a surrounding wall-wetting annulus flow through a solid channel. The model, for example, represents the flow of oil in petroleum reservoirs. The flow may be forced to break up when passing through a channel’s constriction. Although it has long been observed that the breakup occurs near the neck of the constriction, the exact conditions for the occurrence of the forced breakup and its dynamic theory have not been understood. Here, we test a simple geometric conjecture that the fluid will always break in the constrictions of all channels with sufficiently long wavelengths, regardless of the fluid properties. We also test a theory of the phenomenon. Four constricted glass tubes were fabricated above and below the critical wavelength required for the fluid disintegration. In a direct laboratory experiment, the breakup occurred according to the conjecture: the fluids were continuous in the shorter tubes but disintegrated in the longer tubes. The evolution of the interface to its pinch-off was recorded using high-speed digital photography. The experimentally observed core-annulus interface profiles agreed well with the theory, although the total durations of the process agreed less satisfactorily. Nonetheless, as the theory predicts, the ratio between the experimental and theoretical times of the breakup process tends to one with decreasing capillary number. The breakup condition and the dynamic theory of fluid disintegration in constricted channels can serve as quantitative models of this important natural and technical phenomenon

Removal of biofilms by impinging water droplets

The process of impinging water droplets on Streptococcus mutans biofilms was studied experimentally and numerically. Droplets were experimentally produced by natural breakup of a cylindrical liquid jet. Droplet diameter and velocity were varied between 20 and 200¿µm and between 20 and 100 m/s, respectively. The resulting erosion process of the biofilm was determined experimentally with high-speed recording techniques and a quantitative relationship between the removal rate, droplet size, and velocity was determined. The shear stress and the pressure on the surface during droplet impact were determined by numerical simulations, and a qualitative agreement between the experiment and the simulation was obtained. Furthermore, it was shown that the stresses on the surface are strongly reduced when a water film is present

Gas Dynamic Virtual Nozzle for Generation of Microscopic Droplet Streams

As shown by Ganan-Calvo and co-workers, a free liquid jet can be compressed in iameter through gas-dynamic forces exerted by a co-flowing gas, obviating the need for a solid nozzle to form a microscopic liquid jet and thereby alleviating the clogging problems that plague conventional droplet sources of small diameter. We describe in this paper a novel form of droplet beam source based on this principle. The source is miniature, robust, dependable, easily fabricated, and eminently suitable for delivery of microscopic liquid droplets, including hydrated biological samples, into vacuum for analysis using vacuum instrumentation. Monodisperse, single file droplet streams are generated by triggering the device with a piezoelectric actuator. The device is essentially immune to clogging

Specification and design for Full Energy Beam Exploitation of the Compact Linear Accelerator for Research and Applications

The Compact Linear Accelerator for Research and Applications (CLARA) is a 250 MeV ultrabright electron beam test facility at STFC Daresbury Laboratory. A user beam line has been designed to maximise exploitation of CLARA in a variety of fields, including novel acceleration and new modalities of radiotherapy. In this paper we present the specification and design of this beam line for Full Energy Beam Exploitation (FEBE). We outline the key elements which provide users to access ultrashort, low emittance electron bunches in two large experiment chambers. The results of start-to-end simulations are reported which verify the expected beam parameters delivered to these chambers. Key technical systems are detailed, including those which facilitate combination of electron bunches with high power laser pulses.Comment: 13 pages, 12 figure